Recent content by yukonjack

Help!!!! I have a First Strike Meter- You need to input the transponder frequency, symbol rate, and local oscillator frequency for my location- Brevig Mission, Alaska 99785 The First Strike webpage has some details, but to a rookie like me its all Greek! Any help will be great! Thank You...

English please!!! haha Before you guys translate.. If I currently get a signal through "sat1" with my working dish; I then remove working cable and replace with cable to the non-working dish to "sat1" and rec. does not read won't that mean a bad LNB? or could the cable itself be bad? I live in...

I moved the cable to sat. 1(to the input that works with the other dish) and the rec reads "no switch detected" does that mean bad LNB?

the switch reads the other sat. although I will switch to other side to eliminate that possibility would be difficult to connect LNB to rec. directly due to distance and availability of cable ********** another quest. I noticed that some have more than 2 sat. 110, 119, 129 etc are they all...

yes, reads one sat. connect. reset vis power button 10 sec. reset via power cord 1 minute

yes, reads one sat. connected reset via power button. reset vis power cord- 1 minute

I have a Dish 500. I need two dishes to rec. 119 and 110. I have been trying to aim one of the dishes. had sat. finder hooked up and cable disconnected from the switch box for several days, during same time it rained/snowed alot. When the skies cleared I returned to aiming dish, hooked cable...

one more thing.... which transponder is best? to find 110

FYI- with the larger Dish on 110 my signal level was 65-75.

I had 110 before. The 4 footer was picking up 110 and the smaller 119. This was done by a former satellte installer with a very $$$ finder. The problem was I would lose the signal with the smaller dish at 119 many more times than when I switch. With the large Dish on 119 my signal strength is...

My receiver is a DP 510. Trying to locate 110. Now I have 2 Dishes. Switch DP21. Do I need two Dishes? Have learned a lot from reading posts, but haven't found my answer. zip is 99765, way north One Dish is 2 1/2 ft. and the other is 4 feet. Both have LNPs have two inputs. Is it better with...