Search results for query: *

It looks like Dish has them on a spot beam. So I couldn't "move". Am i right?

What is the minimum size dish?

It's all in the title. Thanks Marc

Here is a link to help hook it up. http://www.dishnetwork.com/downloads/pdf/technology/installation/SHOW_949_dishpro_install.pdf Marc

Yes that would be a DP 34 switch with 4 outputs. I have both setups available. $40 shipped for either one. Let me know if interested. I accept paypal.

Dish Pro

If it is a superdish (3 foot oval) you also have a DP 34 switch which needs to be replaced with a DP 44 switch. These aren't cheap its best to call dish to have it done. Now if it is a Dish500 (20" round dish) then all you need is a DP21 switch and a DP lnb.

Yes and no. Depends on what equipment you have. The older version is called legacy and it will work with the right multi switch. The newer stuff is Dish Pro which is not compatible. Dish Pro can be identified by looking at the dish lnb or multiswitch if there is one you will the word Dish Pro or DP.

Their main office is in Green Bay.

They currently cover Michigan and Wisconsin. They had AZ 3-4 years ago.

I would call Dish and have it replaced before you void your warranty and have a dead 522

**For sale Dish 921 and superdish**SOLD SOLD Like new 921 just under 4 months old. Remote and manual included $425 free shipping. SOLD Brand new in box superdish with DP 34 for 121,119,110 $125 plus shipping. Older Dish 301 with remote. Missing remote battery cover and some scratches on...

I emailed them about the error and its already fixed! Thats fast service.

I tried to print out a coupon and found a typo. They are missing MI for Michigan.

I have been doing dbs for over 6 years and I'm thinking about getting into Vsat and/or Direcway. Do they pay well? Where can I find training? I have seen groundcontrol.com are there other areas to look? I would like to here the good and the bad points if anyone here is installing these...

Listed on Ebay starting price $125 <A HREF="http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5753923770&ssPageName=STRK:MESE:IT#***">Click here</A>

5 used dish 500's complete with mast. 3 Legacy twin lnbf's 2 Dish Pro twin lnbf's All worked when disconnected. May be faded and have some light scratches. $175 1 Dish Pro quad $50 Buyer pays shipping from Traverse City, MI Paypal preferred PM or email mcg2003@msn.com Marc

The signal is reflected from the dish to lnb which makes the dish look like it is pointing lower than it should. The ground or horizon is 0 degrees and straight up would be 90 deg. Hold your arm out at an angle in between these and that is 45 deg. approximently where the dish will need to point.

If you can swing the dish back to where you had 92% on 119 and then RUN A CHECK SWITCH you should see both sats. Check switch screen should read 119 119 110 110. If it says x x x x 119 119 you will need to reaim the dish because you caught 119 on the 110 side of LNB. If you lock on 119 (green...

You should repeak for 119 and then run a check switch this should do it for ya.

I have seen this many times with RCA tv's. I believe some have a problem tuning to a uhf channel such as 60 trying different channels usually doesn't help. If there is a vcr at that location tune it to the channel the tv was using usually 60 and put the tv on 3 this should work be sure to leave...

Here is the DPP Twin :) http://www.vssll.com/dishaccessories.htm

There are two flex ports you would use both. One cable from 72.5 and one from 95. Plus four from the phase 3.

Hey that looks like the guide I posted on 11-16 :) Glad you were able to shrink the download. My 8MB version was a bit big. Marc