Search results for query: *

You have a PM Hope it helps

Good question........

I use the I-Link 9000+ for TFTA and it works good and has a blind scan. Heres some info on the 9500HD • DVB-S2 MPEG4(H 264) HD USB PVR RECEIVER • MPEG2 MP@ML, MPEG2 MP@HL, MPEG4 AVC/H 264 HP@L4 • MPEG-1 Audio L1/2, 2ch Down-mix: MPEG-4 AAC, HE-AAC, Dolby, Digital, MP3, WMA support • 7 Favorite...

To get sound on speed and fuel. I have to push the audio button on the remote to change tha audio type. Then it works great. Hope this helps

Glad to see someone else from Texas on the site. WELCOME

Thanks for the try Trommy

Thanks Lak7

Yea I'm sure on the quality. The siganal runs lower mid 80s

No nothing at all in the way. I just meant I have tried both C/Ku. In between 72w - 87w. Sorry didn't make myself clear.

I'm getting good quality mid 90s on 72w and 87w, but nothing in between I have tried C/Ku. I'm also getting good quality on the rest of my sats from 87w- 135w. Quality from the mid to upper 90s. Any help or advise would be greatly appreciated. Thanks

Can someone please tell me what satellite this is on VYVX ATLANTA 3742 V 6111 TANDBERG Its some where between 74w-85w Thanks

I know where there are 2 Birdviews less than 3 miles from my house.(East Texas) Hate to see them just going to waste.

My scalar ring had a very small lip about a half inch in side the scalar ring and that was the focal piont for that dish.

Interesting dish We'll keep your wife in our prayers.

Here in E.Texas there are plenty out here in the rural areas Solid and mesh, But not many bieng used.

Well got it done in about an hour. I left the ring on the sat and used a file bit that goes in a drill. The bit is about 1 inch long and about 1/2 wide. Looks just like a file. Worked very well no clogging on the file, but you need wear some gogggles. Lots of small shavings. I moved the LNBF...

The hole in the the scaler ring is 2 5/8 same as the dmx. Except for the 1/16th or so that sticks out in the bottom of the ring. I was thinking of getting a 2 5/8" hole saw bit and just drill the last 1/2" or so out. Very carefully with it on the dish. I really would like to keep the BirdView...

Thats what I thought I needed to do . So I guess, I will have to do a little modification to the inside of the scaler ring. To get feedhorn fush on the bottom of the scaler ring facing the dish.Maybe a drimel tool. Because I just need to take off about a half inch all the way around and about a...

I have a 8' 6" solid Birdview dish with a Dmx 741u LNB. When I installed the new scaler ring it bolted right on top of the old ring. I was glad of that because the bolts on the struts of the old one were very rusty and I was afraid they would break, if I tried to take it off. When I put the new...