Search results for query: *

Also, you will need an eight port switch installed. Markets with round dishes use a 2x4 switch, PhaseIII dish markets already have four ports. To add a fifth port will require either a 2x8 or 4x8 which adds $$$. Probably better off popping dot eh extra $49 from D*

Also - in most cases that ROE must be filed with the local municipality/county/et al; so it is part of the public record and you don't have to *rely* on the MSO's honesty or the building owners recollection with regards to cable ownership.

Bob - pretty sure GlobeCast lost those some time ago. Don't see them in the lineup anymore on thier website: http://www.globecastwtv.com

For a commercial/hospitality setting such as yours, the quote was probably pretty accurate. Big difference between residential and commercial receivers (i.e. not free) not to mention an SBCA level 3 certified installer (required if doing commercial installs) to set it all up. However it...

You can use just one destacker (if your provider is charging you for these, it can get to be expensive!) and a 3x4 multi-switch. + Split your line from the wall plate with a high frequency splitter. + Run one side of the splitter to the +13V side of the multi-switch + Run the other side...

Sorry to say ... to many variables to get even a guessable answer. For starters: + What's the output of the combiner? + Are all the drops home run to the head end, split by floor, <gasp> DC'd? + What cable type is being used if home run ... if split by floor? + What does the engineer...

FWIW ... I have been buying our posts from the local fence dealer. They have the correct diameter posts for every dish we have come across. Was in griping the other day about our 44" frost line for a DiRECWAY install we were most likely going to have to jack hammer. He had the answer in the form...

Using multi-sats on a stacked system can complicate things. Without seeing what you have at the DVR, makes it hard to troubleshoot. A diagram or picture with the components would help. As for your HD unit, you may need a pair of destackers to unstack the signals (again dependant upon how they...

You may find that you have better success contacting a non-corporate distributor such as RS&I or Mid-State. Speaking from experience here. Took us four months to get finalized with corporate, about two weeks with Mid-State ... and treated a whole lot better. We don't do anything with our...

XM has two NASCAR channels: http://www.xmradio.com/programming/channel_page.jsp?ch=144 http://www.xmradio.com/programming/channel_page.jsp?ch=145 Dunno if that was what you were referring to.

Ditto what Elsteveo said. Not going to stick up for anyone's customer service(as a matter of fact, now-a-days I think most corporate conglomerates see customer service as a revenue-draining-nuisance; but that's another thread) but my own. If you were my customer, I'd be happy to help you get...

Would probably get just as accurate results on the signal level meter screen by entering your zip code (menu 6-1-1) Rule one, make sure your mast is plumb and level - no exceptions!. Rule two, set the skew first and leave it. If the mast is level and you set the elevation angle correctly...

Be a lot easier to installer your 5x8 in that central location (four lines already run from the PhaseIII) rather than outside the house. Maybe I am not understanding what you are trying to accomplish with the 5x8?

If you were behind the dish trying to get 119 it would be right and lower Right, you do not need an additional multiswitch, unless you will be feeding more than four IRDs

Math doesn't equate. If you look at the settings for each bird via Miami Fl (33196) you will notice a difference of 20.6 degrees using the magnetic (Az m) compass setting. Huge elevation difference as well. Sat Name ** Sat Lng ** Az(t) ** Az(m) ** El DirecTV 1 ** 101.0W ** 220.9 ** 226.4...

No inconvenience = open wallet and pay installer Maybe you should just install another PhaseIII dish at the pool house. Connect that to a 5x8 multiswitch which allow you to feed the other outlets and insert the camera from one of the existing runs from the first or original dish.

You put the generator on the 101 side ... huh? There should be four lines from the PhaseIII dish to the 5x8. I am not sure how you are breaking out a single 101 line in that configuration. There should be two lines running from the 5x8 to the 3x8. Move the generator to where the line...

Probably will have to use SM5 1.75 degrees to the west of XMR as your zenith and work out the fine tuning from there.

If nothing else, you can move the generator to the receiver and show the home owner how to use it. Off for 101 programming, on for 119/110 programming.

Interesting idea; question though: Would the splitter pass the 22kHz tone for 119/110? I could swear in some head ends we built, we had to add a tone generator between the 119 LNB and the splitters.

Not if you want to keep anything other then programming from 101.

One meter

For archival purposes: http://www.fcc.gov/mb/facts/otard.html Q: Can I continue to use my antenna while the petition or waiver request is pending? A: Yes, unless the restriction being challenged or for which a waiver is sought is necessary for reasons of safety or historic preservation...

And you receive all transponders? I'd sure like to know more about that setup. Please don't take my skepticism as negative, truly interested in how that might work for other applications I have in mind. Most setups need a 4x4 for a two bird solution (D*): +13v Port - 101 Odd Transponders...

Dish500 doesn't have spots for three LNBs. I am more confused then when this post started.