Search results for query: *

Diplexing and signal loss Does diplexing cause signal loss, i.e is the signal cut in half? Since I have an 811 , i wanted to know if the hd broadcast would/could be compromised SK

Thank you all , so its technically possible to run just one feed back. I'll try it over the weekend. This saves a lot of wiring to accomodate the X22 receiver attributes. The possibilities are endless reading some other posts in this forum about combining cable and SAT, 2 TV2 outputs, video...

Sorry the diagram looked good in the preview mode, wonder what happened it took all the spaces and tabs away during the post anyways its Switch to Diplexer to Diplexor (Sat 1 & 2 separated by Separator) + the 522 reverse feed At Switch diplexer I have the TV2 and the source Sat Signal

Let me know if this scenario works with a DPP44 switch and a X22 receiver ---- SAT 1 Recv ---DISH PRO Separator Diplexer...

Resolved Okay here is the solution. The installer was out here today and ran into the same problem i.e the 811 would shutdown after the switch check and during the satellite program download and he had to call a senior trainer for advice On his 2 way radio the senior trainer confirmed that the...

I tried two scenarios a. the Second 811 was swaped out for the 1st one and it failed to download the program info b. it was then placed in the room adjacent to the 1st 811 I would say the distance from the switch to both receivers are the same coming from the attic and it still failed I...

SimpleSimon, I reset the switch. My current setup is as follows 811 on port 1 with the power inserter 522 - Sat1 on port 2 522 - Sat2 on port 3 Only question is should the power inserter be closer to the switch or the receiver Now awaiting the installers. Hopefully they will bring a...

Simple Simon, Seen a lot of your posts. What do you think the prognosis is? Perhaps I could educate the next team that gets here and be educated in the process Do you think the switch is faulty. I even tested the 522 on the power inverter line (Line 1) and it passed the switch check and the...

The switch should be okay, I have the 811 and the dual feeds to the 522 that seem to be working for the 3 rooms The inserter is plugged in since the installers were here last week. Just weird the installer that came out to swap out the 34 with the 44 (so that I could add a second dish) said...

What is the correct way to connect 2 811's and a 522 to a DPP44 Switch a. Should any of the 811's be in the 1st output b. Should the 522 be on the 1st output c. Should the power inverter be included in the setup. I found no effect with or without , with a single 522 and 811 (my current...

The Installers took the 811 with them. I'll try the 522 on the inserter line for now. thanks sk

Hi just joined the forum and I am glad this area exists for DISH customers Here is the issue and hope someone can shed some light Last week the DISH folks installed an 811 and a 522 along with a DPP44 switch which is connected to a Super dish and a Dish 500 (for the must carry +CBSHD). I...