Search results for query: *

  1. bcsman

    OK this better get my Dish signal....

    So had my east arc setup for a week or so and here's an update. We had around 4" of rain between Tuesday and Thursday and while we had Dish going only lost signal a couple times. So my picture stayed pretty darn steady thru the crappy weather. My wife wasn't happy when I got this setup as she...
  2. bcsman

    OK this better get my Dish signal....

    OK thanks this is my first switch in many years from west to east. I still have a picture so figured it didnt matter, cost should remain the same...
  3. bcsman

    OK this better get my Dish signal....

    I have a question, now I have switched from the west to the east arc do I need to contact Dish or will the even care? I haven't changed anything with my plan....
  4. bcsman

    OK this better get my Dish signal....

    No the tree won't come down, altho there is one interfering with my west sats may come down, mostly dead. Putting a new pole in the ground isn't really that much work tho. The tree in my pic is a pear tree and deer like to come and help themselves, nice closeup viewing....
  5. bcsman

    OK this better get my Dish signal....

    Well here's a pic from behind my 1000.4 showing why I am prolly not getting 77. So I either move my permanent pole or take down a tree for either the west or east feeds...come on man. Pretty sure I had figured the east sats were a little more to the left.....
  6. bcsman

    OK this better get my Dish signal....

    I had all 3 sats on my test 211K when I was testing in an open area. With the 211K in my house, after clearing the check switch with nothing connected, when I did a check switch I only got 61.5 and 72.2. So 77 doesn't show up indoors. Well when I first setup on my permanent pole I put foil...
  7. bcsman

    OK this better get my Dish signal....

    So I got the 1000.4 installed on my permanent pole and found I still only have 2 good sats.... I got 61.5 and 72.2 locked in with signals in the upper 40's to mid 50's. But found 77 isn't gonna come in with another tree in the way, good grief. I know all 3 come in well as I did a test in an...
  8. bcsman

    Source of 1000.2 reflector/arm?

    I have ordered numerous parts from Solidsignal.com and have had very good success with them. Plus their prices seem very fair.
  9. bcsman

    OK this better get my Dish signal....

    That's pretty handy looking NYDutch! Hopefully this works out for me, I was getting 50 or so on all 3 sats on the recommended transponders. I have heard signal levels on the eastern arc sats are lower for some reason. Always figured you need 70 or so to get a good signal so not sure, had a...
  10. bcsman

    OK this better get my Dish signal....

    So got it setup on my temp pole, wow the fine tuning on the 1000.4 sure makes things easier. Fiest did a check switch with nothing connected to clear memory. Then locked onto 72 with a good signal and did a check switch and got all 3 east sats. Played with the elevation and azimuth with the...
  11. bcsman

    OK this better get my Dish signal....

    So I have been fiddling around for a few weeks now trying to get a better signal. So far not much has made me say wow. I have tried re aiming my 1000.2 west feed and even tried installing a Dish 1000+ antenna but my 129 signal just isn't going to budge, nainly because of tree growth. So I...
  12. bcsman

    Dish 1000+ problems with 129

    Honestly if it is I can't see it, but I'm sure it wouldn't take much to throw things off. Also the LNB arm seems straight but it could be bent up or down a tad. Either one of these makes the center point off. I do know the charts tell me my elevation should be 29 degrees but to get a signal I...
  13. bcsman

    Dish 1000+ problems with 129

    What I have done for now is mount my old Dish 500 with the Dish Pro LNB to get the 2 eastern sats 61.5 and 72.7. I know it isn't made for this but truthfully I am getting a better signal this way then on the western sats. Until I make a decision for a more permanent soluion this will do. I...
  14. bcsman

    Dish 1000+ problems with 129

    Well hate to say it but have given up on this project. I am getting the odd/even transponders but mounted on my pole and just can't get it dialed in for all 3 sats. Seems like when I get 1 or 2 tuned in OK the third just doesn't. I have adjusted elevation, avimuth, and skew til the cows come...
  15. bcsman

    Dish 1000+ problems with 129

    So good news, finally got my Dish Pro LNB and got it mounted yesterday. Took my temp antenna pole and found the sats and great news, I now get even and odd transponders on all 4 sats. Gonna wait for a cooler day to install on the Dish pole, 90's heat index next 2 days. I will post when I do...
  16. bcsman

    Dish 1000+ problems with 129

    I did find the one for $30, gee whiz the Dish Pro Twins are less money. I did order one so hopefully will get this working right. Thanks for all the help....
  17. bcsman

    Dish 1000+ problems with 129

    Wanna sell one?
  18. bcsman

    Dish 1000+ problems with 129

    Thank you...
  19. bcsman

    Dish 1000+ problems with 129

    So by the picture that is a legacy LNB? When the other sats worked and 129 didnt kinda makes sense....
  20. bcsman

    Dish 1000+ problems with 129

    I have this Dish 1000+ setup and working very well with 110, 118, and 119 sats. Unfortunately on the 129 side LNB I am only getting a signal on the odd transponders. I get nothing on the even transponders and I have peaked the level to make sure it's maxed out. I have 2 LNB's I have tried and...
  21. bcsman

    Needing to transfer to East Arc, couple questions..

    It never ends, discovered not getting an HD picture on some channels, only getting a signal on the odd transponders. Did everything I could think of and not a budge for the evens. So took it back off and put the 1000.2 back on and it gets odd and even. So cabling is not the issue as the same...
  22. bcsman

    Needing to transfer to East Arc, couple questions..

    So had a few other projects going on, and honestly dreading continuing this upgrade, I got back to it yesterday. I did one check of the 1000+ on my antenna pole and got all 4 sats so decided to proceed. I removed the existing 1000.2 and replaced with the 1000+ then aimed, got a signal on 119...
  23. bcsman

    Needing to transfer to East Arc, couple questions..

    Yes interesting read but kinda frustrating for me...lol It's certainly been a roller coaster ride for me, but it's a learning experience....
  24. bcsman

    Needing to transfer to East Arc, couple questions..

    So today I took my setup to more of an open area and got lock for all 4 sats almost immediately. So it seems realigning the LNB arm has made this act as it should. So maybe this weekend will get the confidence to replace my 1000.2 with the 1000+. I do have a question tho, it seems I am...
  25. bcsman

    Needing to transfer to East Arc, couple questions..

    Well here's my day. I did my best to straighten the LNB arm, used a square to make it extend 90 degrees from the dish. Installed the LNB assembly again with the 129 side dish and mounted on my tripod. Set it up next to my present setup, leveled and set elevation and skew. Got my monitor and...