Search results for query: *

INVACOM QPH-031 does both linear and circular polarization if that matters to you

Sent via E-mail just now ... stbs.udf I uploaded from stb, caused cycle reboots (renamed it that to avoid confusion) downloading the userdb.udf from here to the stb MicroHD now... used Wallyhts's USB cable and download. And .. YAY we have recovery The hardest part was knowing to go to Device...

I installed the driver, it found the hardware each time, said ready for use. Thanks it shows it as com 5 ok so I changed the software aliediter to use com5 ... that's the step I needed, ...forgot to look in Device Manager. it Tested port, OK, now seems to be uploading from wherever to a...

Been trying that, I have 7 USB ports, swapped places with phone chargers, Magic Jack, Wireless N adapter, and various other things in USB ports....tried in the 3 USB jacks in the front and the 4 in the back... same issue ... no rush as long as my other works, I scan live with KU band for now, I...

Ok, in Ali Editor Setting Serial Port No matter which is chosen from drop down box. all the baud rates etc are greyed out So, I rebooted, entered Computer BIOS, enabled COM1 ... on "Auto Select" for resources Windows restarts, Ali Editor ... I choose Com 1 ... same thing all the baud rates...

You had asked me to send you the udf file from when my continual reboot cycle was going on Ok, I ordered the USB recovery cable, removed cover, plugged it in installed the driver and ali editor, downloaded the 8-28 .udf file from first post in this thread unzipped it too restarted computer...

click above attached photo to see how to adjust 1) Declination 2) Latitude/Elevation on that Sadoun Polar Mount 1.8 dish In case you decide to add an Actuator/motor for more satellites

If both *ends* are off, rather than azimuth/needing to go east or west a bit See Tron's post above re: Declination angle When you changed motors from the SG6000 to the HH90, you probably needed to change the bracket on the back of the dish itself (Mine is different for the HH90and the DG380B...

<Embarrassment emoticon> Thanks, I suppose I should have entered my Lat Long in the second MicroHD instead of thinking it could read the mind of the other one I'm a TV watcher, not a Satellite guy, and can build computers blindfolded since before there was plug n pray when we had to know what...

I'll try to get one of those cables ordered soon and e-mail the file if I figure it out I am in process of getting my 6' Sadoun C-band dish assembled and spot prepared for concrete etc ... been using the Geosat 90cm on the HH90 mounted on a steel fencepost till then (neighbor's fence) Going...

unescapable cyclical reboot blind scan 116.8W (same location as 118.8W?) no program found went to sat list removed heart 116 pressed exit went back to channels list to select 118 to see if any channels needed favoriting (I forget if I had un-hearted 118 or not) it rebooted by itself, came to...

I'm keeping it for another dish, but Sadoun must be shipping now to fill backorders, which this was

In my experience, it isn't so much a radius as the nearest market, and not all channels from that market are necessarily included I'm out in the Country between a triangle of cities 60 miles one way is Austin, Tx, they included most of those but not all as local I'm also 60 miles from...

Dg380B I got from Sadoun 2 days ago (delivered Monday 10-22-2012) says nothing on the box nor in instruction manual specifically stating USALs, (I know my HH90 does) (post size same diameter as a Dish/DirectTV mounting post 42MM (1 5/8" by my tape measure) Shaft, though it came in a DG380...

And I couldn't get it all last week ... now I can as of a couple hours ago

my Stab HH90 SatelliteAV recommended and I got last week works well (for my 90cm dish like www.satelliteav.com/ sells http://www.harmonyfta.com/Stab-HH-90-satellite-dish-motor_p_324.html harmonyfta Stab HH-90 satellite dish motor 1 $69.00 free shipping Compatible with all DISEqC 1.2...

The only reason I consider multiple upgrades is that before I knew better, I bought Sadoun's C band motorized kit, and that's what it contains, a 6' prime focus. I'd have been thrilled to buy a kit with a 8'/10'/12'/15' mesh dish and MicroHD, but I didn't find any so ... that's what I got...

Seems like everyone in Texas, (except one guy in Pasadena), mounted on tall poles http://dallas.craigslist.org/ndf/ele/3319344586.html don't think I need to, but getting free/cheap dishes is work lol

Dallas area Satellite Dish and Receiver - $75 (Plano) http://dallas.craigslist.org/ndf/ele/3319344586.html several photos at link such as

I re-read ... Reducing a 6" pipe to a 3" pipe isn't tough, been doing things like that for over 45 years. In fact, a person could sink a 12" pipe into the ground, set it in concrete, and have it stick a few feet above ground, and pour concrete into that pipe and set any diameter pipe inside...

12 foot satellite dish for free. Come and get it. Your's to do with as you like. Make a pond or watering trouf, whatever. In central Lubbock. http://lubbock.craigslist.org/bar/3291481701.html Date: 2012-09-23

the 6' dish isn't up yet, just got it- Sadoun's C-band motorized kit ...I just took it out of the box ... I think I will go get 6" OD and weld a 3" at the top of it and if I later buy the 2.4meter SatPro polar mount one I linked to for $600, it uses 3" pole too...

I got my 90cm dish, HH motor all installed and aimed; mounted on a fencepost before I move it (a tree stump restricts movement to the end of the arc I want and I have to drive over the RG6 with my car; it's on the other side of the driveway) but it is good enough for now, or I may move it to...

now the funny part, after finally locating and installing a motor I just got a UPS notification that the DG380B I ordered, and forgot to cancel ... was just shipped Guess I'll install an FTA system for my brother or something now that I know more

You old-timers/experienced guys will get a laugh out of me wasting a day but ... What would be nice is if The manual for the HH90 had had in the directions for setting up *dish* elevation when setting up USALs which they omitted, but included in the section for setting up DiSEqC1.2 The motor...