Search results for query: *

It's looking for the Air Date and the Episode number, if either is missing or in questionable it records the TV Show. Better to be save than sorry.

Software could be so old it's not target, Do you have an DN241 card? without it your out of luck.

Make sure you get a single Hard Drive, some units sold have two 500 gig hard drives to get to 1 TB these units are not supported.

e-mail CEO@dishnetwork.com and you will get your answer.

If you mean the TurboHD dish is the old Super Dish, which is bigger than current dish you would need extra support and brackets. Check out SatelliteGuys store, they may have what you need.

Sad part is the builder really did not save any money. You should be able to connect the RG6 cable to the RG59 cable and pull. should be able to pull the cable all the way to where it goes outside. Then you may have problem getting there.

It's a little late but Let’s remember and pray for our military this Christmas and everyday.:angel: Just received this today. It's a great U-Tube Video :up YouTube - A Different Christmas Poem Merry Christmas to all

Yea for Dish Network :ok: It's about time we start getting back to Merry Christmas, it's one of the reasons for the Season. Peace to all and Merry Christmas to all. :up

Just turn off your units and leave them off, don't mess with them for about 24hours. No need to call Dish and ask for an authorizing hit because once your request it good for 24 hours. What software is in the box? If it's really old it will never take the download.

Here your Jog:D 1. Press and Hold the SAT button until all the buttons light up and SAT button will flash. 2. Let go enter the number via a key paid of remote address your want to use. 3. Press the # sign 4. your all sent. e-mail via this site and I can help you some more. Have a great day.

AGREED :eek:

Do you have the new DN241 Smart Cards, Are they active on a account? If not active I don't think Dish will active them, nor would they sell you smart cards for them.

In a word "NO". unless the HD channels are not on spot beams.

I would cut the cable and add a barrel connector with a longer cable. you will only lose a few db's of signal. I have never had any luck getting them apart once they are connected.

You can't the 625 has USB 1.0 which is not supported and if it was it would take forever to transfer anything. The cost is the same for everyone 39.95 one time charge. The fee is for the account and not the receivers.

Always before you buy, call Dish with the CA ID and or Smart card number and asked about the status of the boxes. Becasue there a lot of them out thier that belong to Dish.

Remember Echostar is going to be a separate company from Dish Network soon.

Call dish and ask them to unlock the receiver, If they don't do it you won't get into the box.

922 replaced the 722S. basically is was a name change because of all the extra features:D

where ever you buy it from, get the Receiver Id and Smart Card id and call dish to check the status of the receiver. It maybe own by dish or has a balance on the receiver and the only way to get it active is pay off the balance.

You may have need to download new software, if the receiver had been sitting somewhere it may have had old software.

any of the new receivers you can also setup DishComm to share a connection.

Sound like they did not setup the order correctly, call back later tonight (when it's quite) and see if another CSR can fix it. If not ask for a supervisor. I feel your pain.:eek:

If your having the LNB swaped out, have them check the signal at the dish. The dish could be off just a little causing the problem. In fact it may not be LNBF, but a repoint issue.

:eek:where in the world did you get the "Dish performs audits on installs ordered through Dish. What that means is the physical dish must be mounted on the front of the house where it is visible from the street. If you order through an installer you can have hardware mounted out of sight. "...