Search results for query: *

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. I

    Looking for 2 channels

    I do but I may have to get up there and double check. When looking from the fromt of the dish I had it set to anhsir below 25 to the left. What’s hard to explain is turning the LNB left or right wasn’t really changing the quality/strength when I had the TV up there. But it’s worth checking this...
  2. I

    Looking for 2 channels

    LNB
  3. I

    Looking for 2 channels

    back photo
  4. I

    Looking for 2 channels

    I’m using a manhattan RC1978 and geosat pro 36’. I hat to bring my dish elevation almost all the way down to get the signal. There are also some trees there but I’m also abel to scan 200 channels.
  5. I

    Looking for 2 channels

    Hi guys, Thanks for all your help getting the dish setup. It is working really well. I am looking for the following 2 specific channels and when I do a "Satellite Scan" or "Blind Scan" on my Manhattan RC1978, it does not find these channels. I even tried to manually add them by setting the...
  6. I

    OTHER Adding new channels to Manhatthan RC 1978

    I can’t seem to find anywhere in the menu that allows me to add channels, I can see where to add a transponder but not an actual channel with the audio and video pid.
  7. I

    GEOSATpro Installing in a Directv Pole/Mast

    Everything is set, I scanned about 180 channels. The reason why I had lost my signal I figured out is the lnb power on the receiver was set to off. After I set it to ON my signal and quality were good and I scanned 180 channels. Not sure how I set it to off and lost 3 hours in the process but...
  8. I

    GEOSATpro Installing in a Directv Pole/Mast

    lnb
  9. I

    GEOSATpro Installing in a Directv Pole/Mast

    manhattan 1978
  10. I

    GEOSATpro Installing in a Directv Pole/Mast

    Now I’m working backwards. I had g19 locked with 81 strength and 54 quality and scanned 164 channels. Then I started messing with everything including the LNB and now I can’t get steady strength and I have 0 signal.
  11. I

    GEOSATpro Installing in a Directv Pole/Mast

    I mounted the dish the signal quality keeps going from 0 to 55, what could that be from?
  12. I

    GEOSATpro Installing in a Directv Pole/Mast

    As far as elevation is concerned, the part of the roof that the existing mast is on is not flat and the geosat dish has an elevation guide on it as well, I’m attaching the picture. Secondly, please take a look at the picture of the LNB. It has a pointer guide on it too, what should I set that...
  13. I

    GEOSATpro Installing in a Directv Pole/Mast

    ok, i just confirmed the pickup of a small tv from a friend tonight
  14. I

    GEOSATpro Installing in a Directv Pole/Mast

    I also have a dish network dish that is on the roof but mounted a much lower than the directv one where I can actually work from the ladder instead of having to go on the roof. The directv one is mounted higher so I figured and was the bigger/heavier dish I figured to try to use that pole...
  15. I

    GEOSATpro Installing in a Directv Pole/Mast

    It will be a fixed dish, I also need advice on how to find the signal.
  16. I

    GEOSATpro Installing in a Directv Pole/Mast

    I bought a geosatpro 36 inch and I already have an existing directv oval dish on the roof that is not needed. The thickness of the pole the directv dish is mounted on looks exactly the same. Can I install the Geosat pro on this pole and not drill additional holes on the roof? Will there be...
Top
Back