Search results for query: *

I used this cleaner from home depot and a regular kitchen sponge for most of it and a stiff brush for some areas that were not getting clean enough. its a much better option than using a pressure washer as this would likely damage the dish especially it being older. Sent from my iPhone using...

I recently got a 1.2m prodelin dish used for hughesnet. It cleaned up very well but It has some chipping in the fiberglass and I can see the mesh embedded in the dish in a few spots. what do you to fix this or should I not worry and leave it alone.

Thank you!

I bought the USB dongle for analyzing frequencies. So there are 4 sets of FM traps. 2 of the sets say hi "q" trap hi band. what frequency is this referring to? and the other 2 say hi "q" trap lo band/fm, Obviously these 2 are blocking fm, but what are they referring to when they say lo band...

Thanks for the recommendation. That would be something good as the channel would be operating at 515 mhz, or channel 21. Are there any filters that would just block 21, or is that really my only option. Worst case scenario I lose a couple stations between 19-23

The small tower is an old at&t long lines site, not used anymore now with cellular, 2-way radio and a couple of microwaves dishes https://www.long-lines.net/places-routes/maps/MW6610-E-inset4.jpg

WEDW is staying. They are channel sharing with others, including WZME, which is moving to another place. CT Public Television just got approval to remove their side mounted antenna, put a new antenna at the top. and upgrade their transmitter. Since the increased height of the antenna, and beam...

I think its a report by location. I did the report for my house and did another report right down the hill toward the end of my street and there is significantly less receivable channels, as well as the transmitter located close by, wedw the signal level changes from my house to the end of my...

https://www.rabbitears.info/searchmap.php?request=result&study_id=204923 There is my signal report, I have an old antennas direct clearstream about 25 feet up outside with no amplifier, getting about 58 channels facing towards nyc. Sent from my iPhone using Tapatalk

So you basically there is 2 fm traps, which i assume help eliminate fm frequencies. then those go into the 4 sets of dials, which i assume you tune those dials to reject a certain fm frequency. If those reject fm how do I tune them? The fm channels I would be trying to block are 89.5, 91.1...

Sorry if some pictures are duplicated

I have just acquired what seems like a vhf/uhf/fm amplifier/distribution system for an apartment building. The antennas on the roof are long gone, but the box is still there. the equipment is very old, as it is probably original to the building. Are these things still usable? if so, how would I...

I found a 10 foot dish a few months back and was looking at the actuator, I have sprayed pb blaster multiple times and can’t get it to budge. I am having trouble taking it apart, and it seems there is only one bolt to do so, and no sockets fit in the small opening. Is this even repairable, or...

So my next question is, the dish has a motor on it and I need some positioner to power it to move the dish, any suggestions for something that could do this? Sent from my iPhone using SatelliteGuys

I was just able to get a 10 foot c band satellite dish. It has a lnb and I was wondering if its any useful for good fta reception. it seems to have a motor to rotate the inside antenna. Sent from my iPhone using SatelliteGuys

Sent from my iPhone using SatelliteGuys

I have what I think is a Circular lnb from an old Directv satellite dish. I was wondering If it has any use for fta, and If I removed the plate inside the feed tube if it would work Sent from my iPhone using SatelliteGuys

Thanks for the replies. I realized that I was not setting the elevation correctly, and when I set it properly, I was able to get 98% signal and about 75% quality Sent from my iPhone using SatelliteGuys

I have been trying to get signal for a while now from Galaxy 19. I bought a lnb bracket and clamped it to the lnb arm and have it in the same place as the old lnb. Its a universal lnb and have the settings set to 9750/10600 in my Amiko hd265 receiver. Mast is plumb, any suggestions? My zip is...