Search results for query: *

All three receivers have been spoken for...

Both 501's have been spoken for

For sale: 6000 HD receiver, 8PSK and 8VSB modules, remote - $300/obo Two 501 receivers, remotes - $150 ea./obo SW64 assembly (switch, pwr inserter, pwr supply) - $75/obo Legacy Quad LNB - $50/obo Three legacy dual LNBs - $25 ea./obo Two SW21's - free with LNBs, if requested All items...

Edit your profile - one of the icons at the top of the page.

I had this antenna installed for about a month. I'm 46 miles from my DMA's transmitters. I was getting good signals on some channels, slightly marginal (50-60%) on others, so I upgraded to a 60-mile UHF antenna. I'd say if you're within 35 miles, this antenna would work fine.

Scott said: Hopefully, you'll be seeing at least six :)

You'll definately need either a Dish500, or another 18" dish pointed at 110°, since most of the HD is now there. FOR THE IMMEDIATE FUTURE, if you want HBO or SHO HD, you'll need a dish pointed at 61.5 or 148 (depending on which part of the country you're in). If you don't have the HBO or...

You have two choices - legacy or DishPro. On the legacy side, you'll need to replace your SW21's with an SW64 ($150), install a Dish300 with a legacy dual LNB ($80 for the Dish/LNB combo). On the DishPro side, you would need a DP34 ($125), a Dish300 with DishPro single LNB ($80 for both)...

148 isn't doable on the East Coast... elevation is 4° here in the Northeast (NJ). That's too low... we actually have trees out this way :)

The Voom is an 18" round (like a Dish300). The E* is a Dish500, which actually points a little east of the actual aim point, because of the skew of the Dish500 itself.

You will need three cables from the SuperDish to the DP34 switch. It's best to locate the switch inside if possible. From the switch, you will need four cables - two to your 721, and one to each 301. The SuperDish is about 24" in height (dish only). It can be mounted on a facia board...

No. You (like the majority os us) have to wait until SuperDish is offered nationally (meaning when HD gets activated on 105°) before you can get the free SuperDish offer. Realize that, currently, if you get a SuperDish, you won't be able to get your locals, since there's currently no switch...

Because they're aiming at multiple satellites. The SuperDish has to focus on three satellite locations (105, 110, and 119). You can't do that on a round dish, which can only focus on one satellite. [/code]

Area of the Superdish is roughly 691 in.². The area of a 30in. round dish is about 706 in.². It should produce the same, if not slightly better, signal. (This is based on 2D calculations. The surface area of both is actually a little more, given their contour). However, being able to...

Scott said: Right... because the two big satellite dishes with the 7 LNB's doesn't give ANY hint of expensive electronics inside! :rolleyes: :D

Another (what I consider major) problem tonight - two weekly timers set up to fire at 9PM (each set to 1 minute before), no events scheduled or running prior to 8:59PM. Only one timer successfully fired, even though the guide clearly showed both timers programmed. It's the DishPlayer...

Is the "free" SuperDish offer orderable now (Nov 1st), or is it delayed?

Yet another bug that's left over from at least the last version: I keep losing some of my local channels in the guide. Specifically, I'm in the NY DMA, and have lost 2, 4, 5, and 7. A reboot of the 721 brings them back. A minor issue in the grand scheme of things, but pretty annoying...

What's that going to do in the rain?

Coming sometime between Nov. 15th and, well.... sometime after Nov. 15th. It will retail for $999. Don't expect to find it much (if any) lower than that, as dealer cost has been rumored at $950 or so. As for interaction with your other receivers, it won't really matter much - but you'll...

Okay - I'm calling bull$#!t on this. The default setting was 3 minutes. I can buy that user testing revealed that users either preferred a different default amount, or no extension at all by default. It is utterly REDICULOUS to accept that a group of users said, "No, we'd prefer if we were...

Early next year - the DishProPlus-44 (DP+44 for short) switch. It has four inputs (DishPro LNBs only), four outputs, and four cascade ports (to connect to another DP+44 to expand the number of outputs). The outputs have built-in legacy adapters (meaning they can connect directly to a legacy...

Dish said they are going to be inserting guide data for the OTA channels themselves (ie. not relying on PSIP).

Well, that's what was said about the L1.15 upgrade, too. Now that it's here, we have audio problems, limited time to extend recordings, frame-advance problems... Did Charlie hire the DishPlayer programmers that Microsoft let go? I'm getting that eerily familiar feeling... :)

Sorry for all the posts :) Agreed. This HAS to be fixed! When you manually create an event by pressing <Record>, you get the option to extend an event by as long as you want. Someone probably thought it was a good idea to limit this to minimize conflicts with other programs that start...