Search results for query: *

WRBJ-UPN 3934-V AMC 6 My wife doesnt like the 90cm she would hate the 1.2m, but it would be snuck into the yard.

So for my 90cm I can get an arm support and it will cause no problems with reception? I just want to have them for future support.

I believe I just recieved it. The name is showing as HDTV programming but BlackBelt is in the bottom corner.

I have the invacom qph-031, with the setting of 10750 ghz. I am doing the diseq movement and hopefully will eventually find that sat since its available in CA.

I am curious if anyone can get this sattelite in Texas? I am in DFW, when using USALS it will get the echo 3 but with a little movement Amazonas never found. I blind scan but nothing. It shows on the official site that a 90cm(I have) should work in this part of the US. I would like that...

Well I did a little adjustment. Reset the pansat, moved the dish 2 degrees east and then told the USALS my wrong lat by 3 degrees. Doing this when I started using the USALS it would move the dish to the T5 perfect place and scanned beautifully. Now that is working for me, I havent even...

Here is my problem, when attempting usals the dish moves 2 degrees west from the disecq position. I am using T5 my perfect south. Its at 85% and 78% but drops when going for USALS because of the dish movement. This was obviously why I did not even go with USALS from the beginning. Any help...

Thanks, I have read a little about the channel master but have never tried. Your sg2100 works with USALS, its not mentioned in the manual book. It says Goto X is what it supports, are they the same? I just read what the built in sats are on the back of the sg2100 guide, looks great for...

I am going after every sat in the sky available. I have started going west and then will go back to the T7 to begin attacking the east with the motor. My problem is that current position deal. It starts at 27 and stops at 49. I want to start at 1 and go from their. Can I do something to...

Thanks for the help, I have been reading many topics. I have the T5 my southern sat at 90% and 75%. When going to other sats the quality jumps from 80-90% but on some no signal quality(weird). So I blind scan and do receive some of the tp's. Over time it will get better and more of the...

Well I have attempted all for the day, frustration has struck. I am moving the sat to just attempt to pick up anything and receive nothing. I adjust the dish when I think a sat is in the proper compass reading along with small movement but get no quality or signal ever from the signal meter...

That could obviously be it. Should be why it seems to point at the fence. Thanks will go and have more "fun" outside working on it.

Here are a few pics of my setup. I have the fortec set at 57, and the motor at 25. I am attempting to get any channels, will receive 75% level on all sats but 0% quality. Hey I just got 80% level and 15% quality on AMC 2 when waiting for upload of pics. With the nudging it goes down, should...

My elevation here is confusing me, the dish looks as it may barely misses the top of my fence in the yard and the house behind me. I have put them as you stated, now I will attempt to look for a signal on the receiver. Thanks.

If I were to use the latitude it points at the ground. Just for it to look good I have to use numbers completely in the opposite direction for the SG2100 motor. For it to point in the air I have to put lat at 80. I did put the poll in a vertical position. I just cant seem to figure this out.

I am currently working on the 90cm I got Friday, and need a little help. I am attempting to follow the latitude, elevation, and declination angle that are for my area. Which of these goes to the motor and the dish, I am attempting to figure it out but it will point at the ground or just...

"I want to win the Moteck Motor from Sadoun" Sounds like a great opportunity here. Thanks.

Thanks for the help, I am going to begin looking into all of your feedback and info. I did order the sg2100, 90V dish, and the invacom as pointed out earlier.

With the diseq switch you mentioned will that be needed if the cables are used to go into more than one room previously? Also I read the true south is need with clear view, I went and took a few pictures of the dish on roof and was curious if this will need replaced to get all of the possible...

I have been looking at the sadoun site and picked a deal that may work. The SG2100 Moteck Motor, 90V Dish, and FSKU-4v Lnb. I want to use this to receive any stations available(to broaden my no tv habit). I would like to just replace an old dishnetwork dish on the roof and just put this in...

Heres a great idea .75$ to 1.00$ for each station and give us the choice to decide which channels and how many we want. That would please alot. I would cancel all the news and shopping channels that mean nothing to me.