Search results for query: *

Mine was working well when I got it new on October. A couple weeks after, I noticed the sluggishness even on the receiver control panel. I had to point the UHF remote less then a foot from the IR receptor. For some reason when my DSL wireless router was on it was worse. I tried changing the...

Yes, we're in PR. Only one cable from the legacy LNB to the SW21 would work correctly on both polarities?

The DVR is purchased, not leased. Also,DISH charges at least $95 for a service call here [Puerto Rico]. Just trying to help him out.

This is from his apartment complex. The neighbors ditched DISH and the only one left is my brother with a DVR 510. Thinking that it was the SW-21 he purchased a new one. I want to salvage what I can instead of getting all DP or DPP gear, since the LNBs are legacy.

Next week I am going to brother’s apartment to try to check his Dish system as he says that he isn’t getting some channels anymore. It is an old legacy system. He has two 5 foot dishes pointing at 110 and 119. Each Dish has a legacy Eagle DTV32+ LNBs. From what I gather he has 2 - 3x8 (not...

Is this ok? 3x4 MultiSwitch Eagle Aspen MS3X4WB-P* MINI** 3x4 Multiswitch 150' max RG6 cable from LNB to switch, ok?

Hello, I am more of a Dish guy, but have been asked to checkup on a DTV LA setup. Not entirely knowledgable with DirecTV, so I have a couple of questions. Current setup is the following: DirecTV Latin America (Puerto Rico) 1 - 30 inch sat dish with a Sharp LNBSHP02 2 cables coming from...

After 2 years my switch finally gave way. I opened it up and there was water inside. Still looking for an enclosure. I bought a new one with a supposedly new Ground Block Version. It is painted grey unlike my old one which is sort of chromed.

Heh, I went to high school with one of the MTV TR3S VJs, Carlos Santos. I thoght the change was made a long time ago. Oh well...

Tell me about it.... Got 2 - 5 foot dishes (110 and 119). Tried to play around once with a QPH-031 to get another sat on the same dish but never could found anything... Except the 110 spotbeam... In PR.

Currently still available for AT 60, 120, and 180, with one month discounted (11 months). The annual fee only includes the basic programming without locals, DVR fees, additional receiver fees, etc. Those are still billed monthly, but you can pay all 12 months at one time. Just subscribed to...

I found that the "search" menu has changed. Now let's you select a category and sub-category (like the Themes menu) along with the search input.

Tried to test the transponder signals with a DVB-S tuner and it doesn't get any even transponders as well... BTW, 311 still working great and the 625 as well but with the extra LNB cables going into the switch.

So this weekend I switched the LNBs from the dishes and my 119 LNB was working great on my 510. I was getting all CONUS transponders! Signal strenght and channels ok. Working great for a couple of days. So I thought it was a faulty LNB that was giving the errors on the receivers. Today, I got...

P363 Have it set to get updates automatically.

Here's mine (pic). DishPro Dual LNB mounted on an AzureShine AZ-150FM3-P1 150cm dish. Trying to find an LNB bracket for this type of mount...

I had connected the QPH-031 to the 625 (Circular and Linear ports) without mounting it to the dish just to see if it at least recognized it, but did not. As if nothing was connected. So not sure if the LNB doesn't work or the 625 doesn't recognize it. Would that LNB work with the DPP44 switch?

Been thinking about playing with the LNB; swapping them out, but they are a bitch to move around in my dish. Got an Invacom QPH-031 lying around but don't think that would work with any of my hardware. See if I can get my hand on another DP Dual LNB, much cheaper than getting another switch, heh.

:D I thought they might of been a bit long. What do you suggest then? flush to the cap of the fitting? Just for the heck of it put another cable coming from the 110 to the LNB port 4 on the switch; intresting check switch data (pic DVR-625). I had already swaped the cables from the LNB to...

Ok, I ran the coax directly from port 1 (From switch) to my 510 and all receivers work. Needed to remove the power inserter entirely, not just disconnect the power. Still doesn't fix my 510, but good to know. :p

I went a little crazy and added another cable from my dual DP LNB (119 sat) to the third port of the switch, and that seemed to fix my 625 into seeing all my 110 transponders. The 510 still the same.... I even connected the 510 directly to the 119 LNB and the check switch test said that it...

I was looking at the stingers from the cables that my installer made and to me they look quite long. I provided some pics... I made another cable with the stinger even longer and still the same.

Got a 510, 625, and 311. As soon as I disconnect the power inserter, they all lose sat signal.

This is how my authorized dish installer installed my DPP44 switch. That is a tie wrap holding the DPP44 with electrical tape....

Moved the 510 to 2 other "To recevier" ports from the switch and still acts the same. Find it odd now, after changing some of the cable ports, that my 625 can't get any channels on 110 sat. Only my spotbeam and the signal strength is a a lot lower then the other receivers. This is driving...