Search results for query: *

I have an installation with the new AT9 dish and 2 Zinwell WB68 multi switches so the information may not directly apply to your situation. The 4 leads from the dish built in multi switch go to 4 splitters. (Must be power passing on both legs.) The splitter outputs go to the 2 WB68 multi switch...

When you go to measure signal strength on the H-20 it always starts with Sat A so you can't tell what transponder you are receiving. I'm getting transponders 5 & 13 mid 80's and 7 & 15 mid 50's on 103 network 14 in Detroit. I presume 5 or 13 are the Detroit locals.

I'd get a really good electrician to check the boat and shore power system. It sounds like a current leak somewhere. You are probably getting electrolysis corrosion and haven't noticed it yet. This is a potential safety issue and should be checked by a pro.

I had two instances in December when a wet sticky snow caused a signal loss. It was interesting to observe that the MPEG2 channels were lost before the MPEG4 channels. I observed older style dish installs during this time frame and they had less buildup indicating the new design or finish is...

It really isn't that common a problem. I can't remember it being an issue even once a season. I rarely see dishes with covers or heaters even in Northern Michigan. If you are in the upper peninsula you may need a tall pole if you are using a ground mount. You need specific conditions such as a...

Bob, Your question is impossible to answer unless you had both dishes side by side because it is impossible to measure the rain or snow conditions in a quantitative manner on a past install and bring the data forward for comparison. I did have an old 3 lnb dish install that was subject to rain...

Mine lasted until about 11:15 for the nationals and 11:30 for the Detroit local. Alignment wouldn't help me since I had signals in the 80 & 90 normally. The good news is the new satellite lasted longer than the old ones. Just went out for a look. It is really a light coating of snow. This...