Search results for query: *

Does anyone have any tips on how to aim the 1000.2 dish? With the 1000 dish I used a DP LNB and peaked on 119 and then put the DPP LNB on. With the 1000.2 it does not seem possible to put a DP LNB on the bracket. Any help will be greatly appreciated.

I have an install with a 622 and a 322. There are two TV's connected to the TV 2 output on both receivers, giving a total of 6 TV's. Two of these TV's are out of the range for the TV 2 remote. I know I can use two splitters and put the antenna for the TV 2 in the same room as the TV. My...

My supervisor asked me if I would attend one being held in Columbia, SC. I said I would go but do not want to. Not that I couldn't learn from the class, I just hate to take the time off. I had surgery two weeks ago and will not be able to work for at least another week. I do not want say I...

I have to run a trouble call tomorrow and have a couple of questions. The customer says that the dish got bumped and needs to be reaimed. According to the work order the dish is receiving signals from 101, 110 and 119. What type of dish is this customer most likely using? I have never aimed...

I am having problems with low signal strength on the 110 sat. I have replaced every piece of equipment at this customer's house with the exception of the dish. We are using a 625 and a DPP twin run through a seperator. The only transponders having this problem are 23, 25, 27 and 29 (I think)...

A few weeks ago I posted a question concerning the use of diplexers to combine TV 2 signal with a satellite signal. I finally had a chance to try it but did not get very good results. The TV 2 picture was a little fuzzy. Is there anything that can be done about this? I used the Holland...

I will be installing a 622, 625 and a Dish 1000 this Friday. I want to use the prewired cable with a seperator and diplexer for the satellite cable and the TV2 output. I am wondering how often amplifiers are needed for this type of setup and what type of amps should be used if any. Thanks for...

I have a customer that is losing signal quality on satellite 110 even transponders only. The customer has one 522 and two 510's. They are all showing the same problem. Some of the even transponders on 110 have strength around 40 and are causing the system to lose picture but still have audio...

I was reading the features that are avaliable on DPP dual tuner receivers and found something interesting. The manual says that it is possible to use one cable for both the dish and TV 2 through diplexers. It refered to this as "piggyback." This would be an ideal solution for homes that are...

I am having trouble receiving signals on a Dish 1000 and am wondering if anyone can help. The system has two receivers, a 622 and a 625. I am using a DPP Twin LNB with seperators on each reciever. When I run the switch test it says I am receiving sat 110 on input 1, nothing on input 2 and sat...

I have a customer that is interested in having Dish Network installed in his home. He wants all of the cables and phonelines to be run underneath his house and then brought up inside his walls. I am somewhat familiar with bringing the wire down the wall from the attic but have never tried...

I have a customer that is interested in having Dish Network installed in his home. He wants all of the cables and phonelines to be run underneath his house and then brought up inside his walls. I am somewhat familiar with bringing the wire down the wall from the attic but have never tried...

How many dual tuner receivers can be connected to a DPP 44 at one time? It seems to me that 4 receivers could be connected if each one had a seperator. Any help will be greatly appreciated.

Hello everyone, I am new to the forum and this seems like a good place to give and receive advice on installation. I have a customer that currently has a SuperDish which is receving signals from 119 and 110. The customer has a 941 (I believe) and a 322. The customer wants to upgrade his HD...