Search results for query: *

  • Users: elder
  • Order by date
  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. E

    Considering New FTA System Mainly for PBS

    I have an extra 90 cm dish and what maybe a working lnb left over from the dual lnb GloryStar setup. I think I'll go for for a waist high location and try for 125W. My problem is too many trees so I'll have to search out a spot with a dip in the treetops to permit a line of sight to 125W. I am...
  2. E

    NASA Eclipse 2017

    Great video! I live near Rosman, NC in the path of totality but it began to cloud up about 30 minutes prior. My wife was ill but I put on the glasses and could see the disc through the clouds so I found a good spot on my drive and rolled my wife out in a wheelchair. The clouds parted enough so...
  3. E

    HDVR1200 S:80% Q:00%

    I took some actions. First I went back to the DVR1100c and all was well. Then I pondered the possibility that maybe the switch was the problem but didn't reconnect the HDVR1200 to see. Instead I did something I should have done long ago which was going to a single LNBF installation. I found my...
  4. E

    HDVR1200 S:80% Q:00%

    I replaced my DVR1100c with the HDVR1200 with no changes to the dish. After completing the setup and the restart I experienced a Q:00% but it went away with a power disconnect/connect. Then all was OK until today, I turned it on late and it came up on Ch 106 and the Q:00% was back. Power...
  5. E

    GEOSATpro GEOSATpro HDVR1200 Firmware - Beta Version - 20130818APP

    This info is copied off the box:
  6. E

    How to Access HDVR1200 Manual

    I think those that could officially answer my question are quite busy. I picked this up on the fta receiver support forum;
  7. E

    GEOSATpro GEOSATpro HDVR1200 Firmware - Beta Version - 20130818APP

    When released will the FTA firmware be provided the normal way via sat update?
  8. E

    How to Access HDVR1200 Manual

    Sounds like the church needs it more than me. PM me a shipping address (yours or theirs) and I'll send it on its way.
  9. E

    How to Access HDVR1200 Manual

    Went through the set-up and all went well 'til the restart after that I had signal 80% but nothing in quality. I figured the set-up went OK as I had a channel list. I turned it off/on from front panel, still no quality and TV screen said no signal. I unplugged the transformer and re-powered and...
  10. E

    How to Access HDVR1200 Manual

    I have the HDVR1200 Glorystar receiver but it comes with only an installation guide which says, "Download the latest GEOSATpro HDVR1200 Owners Manual at: www.geosatpro.com/manuals". However I can only find links to the MicroHD, two installation guides and two links to GEOSATpro DVR1100c, DSR100c...
  11. E

    Equipment Needed for 125W?

    The AMC-21 footprint recommends a 130cm dish, would my 90cm dish be worth an effort, my location is western NC?
  12. E

    Equipment Needed for 125W?

    Can the 1200 be used for 125W or is it GS only?
  13. E

    Auto Updates

    Normally on Tuesdays I find my DVR-1100c on and set to channel 1. For at least two weeks this hasn't been the case. Do I have a problem or have we missed a couple of updates? My time was off a minute or so as well.
  14. E

    Equipment Needed for 125W?

    I guess I had better wait and see how the MicroHD fairs with Glorystar before making any move.
  15. E

    Equipment Needed for 125W?

    Would the DVR-1100c work for dish aiming at 125W? It would be nice to know that I have reception before purchasing a new receiver. Because of tree profile I have to select a spot to set up the second dish.
  16. E

    Equipment Needed for 125W?

    I have the DVR-1100c with the original two lnb set-up for 97/101. I also have a second dish presently not connected. I would like to get PBS stations so am considering 125W, is any additional equipment required such as audio decoder?
  17. E

    Maxtor OneTouch 4Pus Anomaly

    Thanks Brian, this morning I performed a more methodical test. I did a 5 minute timer using the flash drive and all was well. I then went to the Maxtor and still had problems so I verified the receiver is not the problem. I turned the receiver off at the rear panel and after a couple of tries...
  18. E

    Maxtor OneTouch 4Pus Anomaly

    I set a timer yesterday for two hours and watched the program as it recorded. About an hour into the program a "saving data" message appeared on screen. The remote was frozen out so I watched what I could see of the program until the end and had to do a rear panel reset to stop the record mode...
  19. E

    Maxtor OneTouch 4Pus Anomaly

    This is one of those situations with too many changes at one time. I went into the advanced mode for the DVR1100c and tried to record GLC on a timer using the Maxtor OneTouch 4Plus hard drive. My first error was that I apparently have to use the "all channel" channel number rather than my "fav...
  20. E

    Source for Advanced User Set-up

    Thanks Brian, I figured this forum wasn't the right place for the fta info. I had been periodically using either blind scan or all channel scan for the last year or so but with the change just couldn't get back to my particular channel alignment. To close this one out, the scans worked fine...
  21. E

    Source for Advanced User Set-up

    I tried to re-enter the advanced mode but things work somewhat differently and I can't recover all my channels. Is there a forum or instruction I can go to for detailed scan instructions for the DVR-1100c? With an all channel scan all the GloryStar G-19 channels don't show up and I can't get...
  22. E

    Glorystar Menu Changes on GEOSATpro Receiver Models: DVR1100c, DSR100c and DSR200c

    Thanks, I find I can get some relief by using the letters at the left of the channel list screen.
  23. E

    Glorystar Menu Changes on GEOSATpro Receiver Models: DVR1100c, DSR100c and DSR200c

    How are we to create favorite lists with the new menu? There are too many channels to deal with without lists. Also.I would like to see an easy way to switch back and forth between advanced and GloryStar modes, but may be dreaming.
  24. E

    DVR-1100c Recording Quality

    I have noticed that my recordings are not as sharp as they used to be. In fact the last couple of tries weren't worth transfering to DVD. Also I am experiencing more lip synch problems. I am using a Maxtor OneTouch 4 Pus as the hard drive am I missing something in setup that would let me select...
  25. E

    DVR1100c Timer Won't Work for Scrambled Channels

    Thanks for the response Brian. It does sound a bit crazy to record a scrambled channel, but since audio is in the clear I listen to Hannity and others. In this case I really wanted to record a John Stossel special entitled "Money Pit". Maybe it will show up on YouTube later.
Top
Back