Search results for query: *

Any ideas???

I have an older toshiba laptop. The battery was bad so I bought a replacement. It wouold show a full charge but it would not run off of the battery. I company I bought the battery from replaced it and told me to make sure I had an updated bios which I did. I'm still having the same problem...

I cleaned everything put it all back together and it worked about 30 minuntes then the picture shut off. I don't know if it is worth paying someone to repair it. I have had my eye on a 65" maybe I'll will break down and buy it. Thanks for the replies.

Thanks for the reply. I did not find a fan but I did find about an 1/8" of dust covering everything. Maybe all that dust was not letting it breath. What do you think?

I have an old RCA 52" rear projection. After it has been on for an hour or two it shuts off the projection lights, I can turn it off and come back later and turn it on and it works. I don't know if something is over heating or what the deal is. Is there anything that I can check, change, or...

Would this LNB work with my DP34 switch, Dish Pro FTA Dual LNB?

I see what you mean. To switch to Dish Pro I would just need to replace my LNBs with Dish Pro LNBs and I could use my DP34? And in the future in order to add more receivers I would need to get a DPP44? Or can I add another DP34?

If I'm not ready to change my LNBs at this time. What switch will give me the maximum ports out?

I guess they are legacy the dish installer installed my upgrade and put the SW21 switch. The DP34 is a switch I bought off of ebay. I did not realize there was a difference. Sorry about the confusion. What would be a good switch to go with to run up to six recievers? Do you have a...

What would be a good switch to go with? I wiil need six ports in the near future.

I've tried all of the different port configurations and none seem to work. I finally hookied up my original SW21 switch and hooked it up to my 510 and it is working. So I know I'm good from my LNB to my switch and from my switch to my receiver. I guess the only thing left is the switch...

Ok I replaced all the connectors with connectors for my cable. I've good cable from the LNB to the switch to the receivers. I was hooked into ports 1 & 2 for my 625 and 3 for my 2700 on my switch. 2700 is reading satellites no problem. 625 is still giving me a switch error message. I was...

Before I crawl 50' through my hot attic I want to make sure my cable is ok. On the jacket it has RG6/0 QUAD SHIELD AWG TYPE CL2/CM 75C (ETL) 3020454 or CATV SUN RES SWEPT TO 3.0 GHZ. I really don't know what all that means, are these ok. Also are there any certain type of cable ends I shoud be...

Ok, I cleared the switch matrix on all the recievers and the 2700 works but not the 625. The 510 never stopped working in the first place. I do still have the switch in the attic I was thinking of mounting it under the eave of my house it will be out of direct sunlight and be in open air...

I'll try it when I get home. Thanks for your help.

I have the 625 on 1 & 2. Now the 311 is on 3 but it is was not working last night. I actually have a forth reciever and old 2700 it was my original one and a dish tech put up my new dish and hooked up the old unit through a switch. Later I added the 510 through another switch like the one the...

I have a 311 in another room and I tried all the ports on it. 1-3 worked and 4 did not work. Also yesterday you asked about my cable it is RG6 and no I'm not using barrel connectors I go straight from the switch to the reciever.

I have 2 cables running to the 625.

Just got back to work. I have a dish500. Wicked I'm new to this how do I know what I have where? I have our 510 hooked up to one of the cables for the 625 and it works fine, But if I hook up the 625 I get the error messages. If I need a different switch I need to know which one to get.

I forgot ot mention I have the switch in my attic and when I went up to check my connections the switch felt very hot it was hotter than the temp. it the attic. Is this normal?

I've got a new 625. I bought a used DP34 switch on ebay. I keep getting switch error messages. The first evening I hooked it up and activated it worked fine, the next day it started giving me problems. Is the DP34 switch the right one to use? Could the switch be bad? Is there another...