Search results for query: *

I just checked, and my sys info screen is showing L447 loaded as of right now! - let's hope that fixes this, and perhaps is also the reason I didnt have the issue when I fired up the 722 this evening.

Thanks for the reply - do you think that it could be a software issue? Perhaps not since I havent seen this happen to anyone else. It hasn't happened now in a couple days - guess I will keep my fingers crossed, I really hate these issues that come and go. If the box is bad, will charlie...

Hooked up my new 722 about 3 weeks ago, no issues at first, now when it comes out of standby (unused overnight) the audio cuts in and out, like the audio is being turned on and then turned off, turned on, turn off, etc.... This happens in rapid succession, and will not stop until I reset the...

Ok, after putting up with this a while longer until I had time for the '8-12' arrival window dish needs to send a tech out. Had them out about a week ago. Here's the short version of what was found, the problems are now fixed. 1. When I had the 942, I had 2 lines going into the box. The...

So, the 3 wires that are coming off the 1000.2 already have all 3 satellite signals in them? If so, I could just link them each up into one of the wires going into the house. Then I would use a separator behind each box? Is this different than a diplexer? I actually have some of these in my...

This is amazing guys - how is that you all knew this, and I have had what seems like every single tech that serves central missouri out here, and no one picked up on that? I went out and verified that I do in fact have the 1000.2 dish, and I am running 3 dual tuner boxes in my house, so from...

I did some searching and really didn't see anything exactly like this, so thought I would post. Here's my situation: I had a 942 that worked perfectly, all the time. I wanted more HD channels, specifically NATGEO HD, etc; so I called dish and was told I needed to upgrade to the new box...

I currently use a dishnetwork setup with 3 DVR boxes, serving 5 televisions (2 of the boxes are dual tuner). My HD box is the 942. I keep getting hangup calls from dishnetwork, very annoying, I will call them when I have some time. Is there any reason to upgrade to the vip box at this...

Just cleared the matrix, re-ran the check switch, same errors. Verified the connections by running a check switch with another receiver, checked out fine. Calling E* now..... Thanks very much for the tips - appreciate it. :)

I recently added a 942 to my setup, with voom at 61.5. In the process, I was supplied with a DPP44 switch. I had the 522 moved to a different room, and the tech installed it with a separator to hook up both tuners. It worked fine for a couple days, then stopped working (message comes up...

I will doublecheck, but I am unaware of any change to anything. Unless something worked its way loose on its own, I am at a loss. The receiver always first showed 49%, and then 'popped' up to the 90% or so as it locked in. The reciever has never worked all that well, constantly downloading...

Ok, I have never had this dreaded but much discussed problem before now. for the past 1-2 years or so, my 811 has worked adequately for my OTA digital signals, pulling 90% or so. This week, totally out of the blue, with no changes to anything in my setup, they are hanging at 49%. This is on...

thanks Bryan. I am feeding an 811 if that matters, also. I am going back and reading all the posts again now. things seem to get clearer the 3rd time. :) I now see that I need to replace the LNB and switch to DP .....getting closer to it just being easier to pay E* the 100.00.......

Ok, I have been through the instructions and the replies, and still think I have a question. I am running a superdish with a dp34 switch. I have a spare dish 500 with 2 SW21 switches on it that I could use to point at 61.5. My question is: what connections do I need to do? I thought that I...