Search results for query: *

  1. Y

    Hopper Upgrades

    I currently have a 622 with Top 200 channels. My 622 is on its last legs with the HDMI not working (component out works) and now optical audio is not working. Would a DIRT member please contact me on upgrading my 622 to a Hopper with Sling and USB OTA Module. Thank you.
  2. Y

    811 Losing its Mind

    Here is what I did to correct the problem: 1) Deleted all my OTA local channels 2) Soft Reset 3) Re-scan all OTA local channels So far my 811 is not requesting to download local guide data every time I enter the guide. Hope this helps anyone else that is experiencing this issue.
  3. Y

    811 Losing its Mind

    I have ver. P381 and experiencing the same problem as well. I believe it started happening to me early this week. Had the 811 since 12/04 and haven't had a problem with it. Also tried a hard and soft reset and that didn't resolve the problem. When I enter the guide, I've been just hitting...
  4. Y

    1/9 Charlie Chat Recap

    Is there an expiration date for this upgrade offer? This sounds like this upgrade is for 'early adopters' who want the new HD channels and locals. If you are in no hurry to view the new HD channels, is it wise to just sit on the fence until everything (HD and SD) switches to MPEG4 and wait...
  5. Y

    Only 61.5?

    I emailed Dish regarding the possibility of mirroring the Voom channels to 148; here's their reply: Dear Mr. Yra, Thank you for your email correspondence. I have no information as the channels are currently at 61.5 from the rainbow satellite. Sincerely, Mark H. Technical Support...
  6. Y

    Mistake to combine antenna and sat signal?

    In my setup, I only have two coax connections; and I have a 811 and a 510 connected to the same tv. So, coax out1 goes to a diplexer, and from the diplexer to sat in and antenna in of the 811; coax out2 goes to the 510. To my eyes, I see no degradation in signal strength or picture quality. I...
  7. Y

    811 Lost Wing Satellite

    I'm using DishPro technology with an 811, 510, and a DishPro adapter with an 4700/4900 receiver, and all receivers see 110/119/148 fine. I only had problems with the 811 not seeing the 148, but this has since been fixed with version 265. I think the DishPro adapter emulates a SW64, since the...
  8. Y

    508 & 811 combination

    This is correct. However, the software for JP1 remotes will also allow you to change the remote address. To program my 510, I downloaded the codes for a 508 and used the software to change the remote address to 10. Here's more info on JP1 Remotes
  9. Y

    508 & 811 combination

    Yes. Using a JP1 remote (radio shack 15-2116), I can control both my 811 (on remote address 1) and my 510 (on remote address 10); I use the SAT device key for the 811 and the VCR device key for the 510.
  10. Y

    What Specials Now From E*

    In December, when I ordered both the 811 and 510, the 510 deal was $99 with a 1 year commitment or free with a 2 year comitment. I opted for latter.
  11. Y

    Best RG6 Coax Connectors

    I use Canare 75-ohm F-connectors with no prolems on my dish pro equipment. However, you need crimp tools (which can be costly) to install them.
  12. Y

    Using 811 & 508 together

    I have a 510 and an 811 connected to my HD RPTV. I have a Pioneer PRO510, and if you have sources on 2 separate inputs, PIP is available. Right now, all my sources are going through a video processor, so I can't use PIP. You will need 2 sat cables, you cannot split the sat signal. In my...
  13. Y

    The 811 OTA Digital Channel Mapping Issue

    I notice this as well ... I'm in the the east bay. I also see that KRON also gets mapped to 57and not to 4 ... could this be a KRON issue instead of an 811 issue? Channel 48 also stays put on my 811.
  14. Y

    New Software upgrade for 811

    I'm also getting 12.1 fine, as well as KGO. What you're experiencing with KGO is similar to my situation with KPIX. When first tuning into that channel it has a hard time locking (locks and disappears), but once it gets a good lock, it doesn't drop it. This doesn't happen to me too often, and...
  15. Y

    Summary of Dish 811 problems!

    Would like to add: 23) Lost of 148 satellite when using DishPro swithces and LNBs. Until about 2/2.5 weeks ago, it was working fine, and E*'s fix: change DishPro to Legacy (IMO, not acceptable). 24) After viewing 0TA for over an hour and switching to a satellite channel the following...
  16. Y

    New Software upgrade for 811

    I ran a check switch after the update and the 148 still shows 'CONN'. After exiting all the way out of the menu, it went to do more checks: 5 checks for the 110, 5 for the 119, and 5 for 148. So it seems to recognize the 148 but it's not pulling in the signal. Not a big deal for me since I...
  17. Y

    811 Lost Wing Satellite

    Update: Tech came out on Sunday and he tried to use a legacy adapter with the 811; that didn't work. He called HQ and they told him the fix was to replace DishPro switches and LNBs to Legacy; and they also told him that a software update is coming out to fix this issue. They would have to...
  18. Y

    New 811 Problem w/ sat 148

    you need to look at this thread Lost of the 148 is being discussed there.
  19. Y

    811 installation help

    The DVI connector on the 811 is DVI-D, so a DVI-to-VGA adapter will not work. You will need a transcoder to go from component to RGBHV. For transcoders you can take a look at products from Key Digital, Extron, and Audio Authority.
  20. Y

    811 Lost Wing Satellite

    Someone correct me if I'm wrong, but I thought that DishPro LNBs combines the even and odd polarity onto one cable, while legacy did not. Since legacy equipment only accepts one polarity at a time, the legacy adapter is used to give the receiver whatever polarity it needs, odd or even. With...
  21. Y

    Does everyone hear agree that the SD Picture Quality flat out sucks for a RPTV?

    I have to disagree. To my eyes, with the 811 doing all the processing (deinterlacing and scaling), SD from my 811 using component outputs to my Pioneer RPTV is pretty good. I feel the SD picture on the 811 is on par with a 510 that's connected to a video processor via S-Video and then...
  22. Y

    811 Lost Wing Satellite

    Considering that the 811 was working when I had it installed about 2 months ago with DishPro LNBs and DP34 switch, having to revert to legacy equipment seems like a band-aid fix. My 510 and 4900 see 148, so I believe the issue is with the 811 and using legacy switches and LNBs is masking the...
  23. Y

    811 Lost Wing Satellite

    Same here. Received my replacement 811 from UPS yesterday. Installed it last night and still showed "CONN" for 148. After it was done updating, I was hoping to see a new version, but still P263. Called E* about it last night and they're sending a tech; but I don't think they'll do anything...
  24. Y

    811 Lost Wing Satellite

    The switch that I have is a DP34. I have a 510 in the same location as the 811 and a 4900 in our bedroom. After swapping the sat cables between the 510 and the 811, the problem stayed with the 811. 510 is on out1 of the switch and 811 on out2; I swapped the cables at the switch, and the 811...
  25. Y

    811 Lost Wing Satellite

    I'm in the SF Bay Area. If it's not a hardware issue, hopefully a software update fixes it.
Top
Back