Search results for query: *

u have to be dha

your quad lnbf will not work with dp34, i repeat it will not work, neither will your dual lnbf. They have to be Dishpro lnbf to work with dp34.

u can not use diplexers with dp separators. read the instructions.

u can't mix dishpro switch with legacy lnb. u will need dp lnbf. as for your legacy receiver u will need SW64 switch with 3 legacy dual lnbf. happy? your max run on you cable is 100' on dishpro it is 200' if you go with dishpro, u go with dptwin, dpdual, and dp34 switch. if you have dishnetwork...

i just hate how long it takes to restart 721s and 921s. the reason they discontinue-d 721 is that now they got 522.

1 more thought, or u can set up reciever his apartment and diplex your line going to your place, and use uhf remote. then u don't wireless video transmitter. might be more economical. than u only need to get UHF upgrade kit and multi-switch.

well, u might wanna go with wireless video transmitters. but will need multi switch to run more than 2 recievers with 3 sat input. u will have set up your reciever in your neighbor apartment. depending on where u buy it, range on wireless video transmitter is 100~500 feet.

get 508 or 501 off ebay, they don't have dvr charge. dish would charge u lot of money for 510 upgrade now that u r existing customer. (u might have to pay retail price+labor to install )

did he do it himself? did tell him what multi switch is? maybe he got them for free somewhere and installed it. or he is just dumb f*ck.

dp is 19 volts

dish might charge u more, under current dha promotion u can only have 1 dvr per account. (read your fine prints)

if you have legacy setup, your max. cable run is 100 feet. after that u need inline amp. in your case it sounds like bad quad, check if your system is ground and check cable connections. Call your local retailer. and have them fix it. typical service call will be between $100 and 200.

just pain them, if you are in california 8' ground rod is not enough, u need 10 '

yes can, but with dish uhf remote. u can enable uhf on 1st tuner. that's it. then u change the address on the remote. e.g. 1st tuner uhf remote on address 1, 2nd tuner uhf on address 2. (u can choose up to 15 different address) uhf remote from dish is like 49 or 59$. try ebay for better price.

3ghz is not an overkill, when dishnetwork transfers over to mpeg 4, u'll know why. on new install dptwin+dp34=free, dpquad=free? which one would you prefer? would you rather go with dpquad and pay for switch later down the road? (u will end paying for 2 more switch) in the field dpquads are...

that manual has errors. dish needs to correct that and their new prints. u aim and lock your signal before you can do check switch. don't try to install it yourself when you can have it done for you for free. but if you really wanna do it yourself, get satellite signal meter from ebay and start...

Your RG6 cable needs to rated for 3000mhz not 2150. the reason i said for dp 34 switch is that, once that switch in place, he doesn't have to change any lnbs or anything, he'll just have to add it as it goes. If your house has smart box system. and prewire and running, dish will give you...

why do u want quad? for future upgrade? u don't need quad, what u need it dp 34 switch. (99$)if u want total 5 satellite outlets u need 2 dp 34 switch.

for 2nd dish install it would not cost 100$. if your call any local retailer ask them to install 3rd dish, it would be min. $200, plus in california most of us have tile roof, which means we would need under eve mount. Any additional hardware and labor is going to be more expensive. and i don't...

U can have up to 6 tuners under your account. Your system is legacy, change it over to dp. u wil need 2 dp 34 switch, 1 dp twin. dp34 is $99 each, dptwin $79, + labor $59/hour I don't expect them come out with separator pretty soon, it took them 3 years to get 921 out to door. probably another...