Search results for query: *

Thanks thats what i thought but was hoping i was wrong, why is it even there why would you want to passthrough IV200 when you have to go to TV anyway. my 625 receiver has one to.

I have a channel master OTA antenna if i hook this into input on IV200 can i use PVR function on OTA channels? will the IV200 search for those channels? i tried this and it did not work. From what the manual says the OTA input on the IV200 is just a pass through to TV?

Wow thats seems like a good deal, I need another Reciever for my other TV room this might be the time to buy.

Its working great right now, as long as i am careful when i change channels and it changes sats when its moving i dont keep going through channels. I am using mosly AMC4 and Galaxy25 I scaned Galaxy 10R but i have OTO antenna so i get most of those local, now i am wondering why i even got a...

I will check for plumb tommorow, It was working great had 3 sats coming in great and motor going back and forth perfect, then it just goes off and motor locks up again and i get nothing cant get it back on track with anything less than a Motor reset and receiver reset, I cant go through this all...

Thanks to all and thanks ng54 that did it changed firmware back to 1.2 now it is going to sats just right. I have most of them dead on all 70 Quality and above except 97 W cant get it past 40 Quality and if i pan it dosent help and if i adjust dish it throws other sats off?

Aww there it is Thanks

That option is not in menu only edit opton i can find is for TP thats all that can be edited

Im sorry guys i dont wont to sound like a jerk it just getting really frustrating and its 90 here today and only getting warmer, I will try anything at this point Thanks

I think this equipment is just poor Quality It does not respond to your directions, it still goes far west then locks up so you cant get it back east. goes right by signals that i want then i reset everything just to have it do it all over again. its the motor thats the problem here i beleive. I...

Thanks Brian, I was just guessing 148 what is happening is the motor is going all the way to its west position 70% as far as motor will go. I will start all over and reset motor on roof, and see if it goes back to 0 position after receiver reset, mine has not done that so far like empric has...

How do you know your motor is set dead on at 0 position? just by eyeball, mine has no numbers just an line pointing down that goes between 2 lines 1 inch apart, very easy to have motor 1 click off.

I cant seem to get mine right, I get the Sat dead set on my TS with strong signals using Usuals and the i try to switch sats to go to AMC4 101w and dish is way off in another direction. 140 W when it should be at 101W.

Dosent it make a big difference using your TS Sat? If I start at 97 W my LNBF Rotation will be way off wont it?

I cant figure out how to get the channels scanned with frequencies that are not strong deleted out of IV200 it goes through the weak signals i scanned.

Ok Thankyou Iceberg I will do that.

Hi, My longitude is 112.2 what TS Sat should i use ? 111 or 113 or something else??

LNB is ok, It was a bad RG6 cable i think, I changed it out going to LNB and now I am getting signals I have AMC4 at 80/80 and Galaxy25 80/70. Do i have to punch in frequencies every time? i want to change sats? when i go back in forth the default freq is in there?I adjusted Dish so that it is...

I tried for AMC4 and menu only gives the option for 11820 so i punched in 18822 V 5700?? It wont let me do H.

I checked assembly of dish and the A is on the left side with a upsidedown B just below on Mast clamp. so everything is right, i followed instructions very carefully. I will try the AMC4 and if i cant get that then i will need i new LNB I think?

Thankyou SatelitteAV, I will print out your post and check all these things, I have allready tested as lak7 has said to do and it works I am getting signal and channels found.

Let me see if I understand this, I have this Dish 500 with dual LBNs it is set up on roof pointed at 61.5 west, if i hook receiver to that i should at least get signal? and nasa channel? if not then receiver is defective? I can try that right in my house because cable is in my HT room.

You mean like a Dishnetwork lnb? I have a dish 500 with dual lnbs for a spare

I have tried it both ways 20 times, I really do appreciate all the help from you all, its best i sleep on it as it has been a long hot frustrating day and i am a little cranky tonight. Good news Dish guys showed up today and installed my 625 pvr with new dish,

I bought my Package from Satellite AV and they gave me a Signal meter Digpower, this is the LNBf i have SINGLE UNV FTA SATELLITE LNBF- MINI - SatelliteAV, LLC. It says that the Signal meter i have wont work with this LNBF, it is the cheap $10 Universal LNBF. I have put up Dishes before and I...