Search results for query: *

Well, first I want to thank you guys for helping out. Conclusion...I'm taking it off the dish and sending it back. I have done the "Hard rest" and it still will not move the dish, just sits there. I'm beginning to think that this brand of dish motor is a P.O.S. Wonder if one of the other...

tried the push both buttons, power off , power back on, still not moving.:(

0k, now were getting somewhere, my manual states to push the reset button... as you can see by the attached photo I dont have one. I will try the push both, power off, power on and see if it works.

There is a hole for the led and there is the translucent button. I peeled the cover off the button and couldn't see anything except the "east" button. There are also 4 small holes on the outside corners to drain water...poked around in these and found nothing. Normally, I would take the thing...

So I looked at the manual again... I do not find anywhere a hole for a reset button. I'm wondering if I need to remove the motor and ship it back from where it came? Thoughts? I know it's the motor as I have put the reciever on another dish and it moves it fine. I changed out the Switch also...

I installed the latest factory bin file, no change in results. I bought a Visionsat reciever and it wont move the dish either... upon further inspection I found the motor (sg-2100) has a RED led lit. My manual doesn't say anything about a red led... it mentions a green and an amber... and this...

I bought a Viewsat Ultra about 1-1/2 years ago, I hooked ot up to a Stab 90 motor on a 36" dish got it dailed in. About 9 months ago it stopped moving to G25 (97 deg). I couldn't get it to move no matter what I did. I decided to live with it. Then it stopped moving to the 74 deg bird. I...

Sir Anole, I greatly appreciate the links and info... I figured this topic had been discussed at great length here, but couldn't locate it when I searched. Thank You:)

I bought a 1.2M Fortec dish from the folks at Sadoun ( my second Fortec Dish), I have the things set up and working pretty good, My question is has anyone devised a way to attach a Micro adjust of some type to this style of dish? I must add they are both running SG-2100 motors. Dealing with...