Search results for query: *

I also am waiting for a Pansat 9200 for $80 :D for my FTA assortment- hopefully with the S2 card installed! However, as I've already run into 2 different people using 2 totally different internet sharing devices which seem to be working, I am somewhat surprised that the prices are caving.

I ran across a post from someone with a Torodial in the Central/South Florida area and now cannot find the nick. Are there any active users with Torodial Dishes in the Central Florida or South Florida area?

I agree with you and this was my first thought - except that I track fine 89W+ and 89W has a rock solid signal and Quality. Also remember that if I replace the Linear LNB with Circular LNB, that 77W, 72.7W and 61.5W come in rock solid as well, thus, I don't think its the tilt as I am on the...

Yes, polarity has been fiddled with to no end.....I just get nothing below 89W (unless circular) for some odd reason and I am sure there has to be a reasonable explanation that has just escaped me for some reason.:confused:

I know the difference in linear and circular. I have no issue getting linear slots from 111W to 89W to come in with a very strong signal and quality. However, below 89W, starting at 87W, I don't get a lock or sign of life on anything linear. I can throw a circular lnb on and lock on 61W...

That was the reason i posted it. Scott is going to be very disappointed as more and more feeds move to QSPK and then you have the higher 9/10 FEC that even 8ft dishes have issues with. The Birdview has to be the best shot of bringing all these in unless one moves to a 10ft. Some of the Sat...

If I were in your area, I would cancel your other dish and get this one: SATELLITE DISH BIRDVIEW

What is the best software to use with this usb S2 unit?

Does anyone know of a place that still sells the dvb world dvb-s2?

Ok...at least up and running, but I am getting no output over DVI > HDMI cable at 720p or 1080i. I've tried both RGB and YPbPr. It works via the 3 component cables, but not DVI. Is this a known issue?

On my QualiTV I have (1) C-Band LNB connected up to DISEqC Port 1 as Horizontal and (1) C-Band LNB connected up to DISEqC Port 2 as Vertical - using this Slave Kit off my 4DTV unit as follows: http://www.sadoun.com/Sat/Products/Accessories/Dishes/Bud-slave.htm Under the LNB type in the...

I have Firmware 2.76 and yes, I can hit v and scroll through 576.720,1080 and PAL, however, it is ALL -50hz, not 60hz. That I cannot update the firmware gives me pause regardless if it gives me a 60hz output or not.

Thanks, but everything you have noted i attempted yesterday. On my laptop, its COM 8 where I get the error when I start the .exe, although COM8 works for 2 other devices when I attempt to connect to them via serial port. On my desktop computer, its COM 1. I do not get the error when I start...

UPDATE. I've tried a second computer. Different Com Port. No error when opening the .exe file. However, QualiTV still will not update. Beginning to think i have a bad unit.

I suspect that is my issue, However, I am continuing to have an issue. I have downloaded the Loader and Firmware. I have verified the pin layout is correct per the pdf - using an ohm meter. I know the com port is correct as I have connected to 2 other serial devices with it. When I start...

I would have posted this to the QualiTV thread under the Equipment Review, but the thread has not been posted to in 6 months and thus the system will not let me. Picked up a QualiTV unit recently and was trying to install it. Powered it, working on running the RG6 to it, so no lnb connected...