Search results for query: *

  1. WyrTwister

    low quality on my new 1 meter motorized dish

    You HAVE to have The whole dish / motor assembly pointed due geographic south ( not magnetic south ) when the receiver commands the dish to reference point ( due south ) . If you do not have this right , then you will always have problems on some sats , often at the extreme ends of the...
  2. WyrTwister

    First channel you saw when you aimed your first FTA dish?

    Ku - AMC 4 channels , or maybe it was T5 . C band on a 90 CM dish , the 2 religious analog channels on G4 wyr
  3. WyrTwister

    So I bought a Skystar 2

    I think the newer versions of MyTheatre will do USALS ? Blind scan on a SkyStar 2 card ? Wyr
  4. WyrTwister

    Stab motors

    I have a HH100 & have uses it for a few years . Works fine . Wyr
  5. WyrTwister

    Using USALS to find "True South"

    So , AMC 6 is your true south ? If so , enter all the info in the receiver menues & then have the receiver tell the motor to go to AMC 6 . Be sure the scale on the motor - to - pole bracket is set for your latitude . Now , go out & tweek the dish for AMC 6 . Now ...
  6. WyrTwister

    Project Primestar success

    Try a Diesque switch or a 22 khz switch ( if your receiver supports it ) to get both polarities ? Wyr
  7. WyrTwister

    Ugh! I think my SG2100 died!

    Are all your coax connectors OK and tight ? Wyr
  8. WyrTwister

    ProagDVB

    I have been using MY for several years . D/l'ed the newest trial version of Proag . It does not seem to want to play well with my Nexus-S ? It finds signal & quality , but will not find any channels when I scan ? No big deal , just curious . Thanks , Wyr
  9. WyrTwister

    USALS and Mytheatre

    I think MT 3.38 supports USALS ? Set it up in the menues . Go to your sat in the sat menue , select all the Trans Ponders and click scan . The first few TP's may come up empty , while the motor is moving the dish . When the dish is positioned , you should start getting...
  10. WyrTwister

    103G stops boot process

    Is this with or w/o the sat coax connected ? Check to see if the card is seated all the way in the slot . Check to see if anything on the card is shorting against anything else . Wyr
  11. WyrTwister

    Is it possible to setup USALS using a satellite that is 30 degrees away?

    My old Fortec works fine with USALS . :-) Wyr
  12. WyrTwister

    Receiver boot

    Make sure you do not have a short in the coax cable . Does it re-boot if you remove the sat coax cable ? Wyr
  13. WyrTwister

    USALS and Mytheatre

    Do you have a collection of " ini " files ? If so , import the sat . The sat degrees for the ini files are from the other direction -> AMC 4 101 West will be 2590.ini -> 259 East . If you do not have the ini files , let us know and some one will be glad to email them to you . Wyr
  14. WyrTwister

    Receiver boot

    Try re-loading the factory firmware ? Wyr
  15. WyrTwister

    Is it possible to setup USALS using a satellite that is 30 degrees away?

    If you can only get one sat with a moter , w/o re-tweeking the dish , it sounds like the angles are wrong . Is the angle on the motor / pole bracket set to your latatude ? Is the dish and motor both pointing due south when you tell the motor to go to zero / reference position ...
  16. WyrTwister

    Is it possible to setup USALS using a satellite that is 30 degrees away?

    Go to the scrap metal dealers & buy the pipe by the pound . Wyr
  17. WyrTwister

    New to FTA- have Super Dish 121W

    I have used a PCI card and MyTheatre for several years . It is a learning experience . A Set Top Box is easier . I have done that for several years to , just not quite so long . If you want to play with HD , on the cheap , the PCI card will do it , on a fast PC . Wyr
  18. WyrTwister

    New to FTA- have Super Dish 121W

    The newest version of My Theater has the USALS feature . If you do the PC card , download the free trial version . It will play a channel for 1 hour before it quits . Then you can decide if you want the full version . But a Set Top Box is easier . If nothing else , check ebay...
  19. WyrTwister

    GNF Movies

    govt-hating, anti-income tax ranting strange places Sounds like my kind of channel , where did you say it is ? :-) My C ban dish is out of whack now , wind . But I use to pick up an analog religious channel on G4 . The preacher also had some interesting archaeological shows ...
  20. WyrTwister

    USALS "bumping" with Viewsat Extreme?...

    If you get a number like 30 degrees 15 minutes , divide 15 minutes by 60 minutes in a degree -> 15/60 -> 1/4 -> .25 , will have to either rounf down to 33.2 degrees or round up to 33.3 degrees . Probably will not make much difference , doubt if the equipment or the aiming is accurate to...
  21. WyrTwister

    What settings in winavi converter convert mpg files created in nextorm to dvds?

    If you do not get it to work , try Nero Vision Express , that is what I use to create DVD's . Wyr
  22. WyrTwister

    Update on Sonicview 8000HD

    As far as I see it , lawyers are a bunch of over paid blood suckers . The system is rigged so that the system is so complicated the average person can not deal with it . The legal system should be written in plain language that any High School grad can understand the laws and the system...
  23. WyrTwister

    how to aim with Sat PCI

    First of all , what program are you using with the PCI DVP-S cards ? I use My Theatre . You can download a free demonstration version . I can help you easier with that program . Go to Atlantic Ocean - LyngSat and check the the satellites east and west of Hispasat . If you can...
  24. WyrTwister

    USALS and Mytheatre

    You mean a bird that is not in the " list " ? Wyr
  25. WyrTwister

    USALS "bumping" with Viewsat Extreme?...

    You may already know this , but Sat Finder Java Script gives you the numbers in degrees and minutes ( 60 minutes to a degree ) . Convert to decimal by dividing the minutes by 60 . May not make a lot of difference whether you round up or down . I have to round the numbers I use for lat...