Search results for query: *

SUCCESS....I had a black usb to serial converter in my shop. It worked...Thanks guys for the assist. You guys are the greatest !!!!!

Using a Dtech blue cable/converter. Loader/editor is a fresh install on one of the two computers I am using. Did a fresh install of driver provided. I am afraid if I do a reset and still can't read/write to the unit I will have to manually re-program it I then won't have sat names. So far no...

When trying to write new file to unit it states "error in receiving data restart box and pc software.

I am using the serial cable that was shipped with the unit. I had no problems before so that's why I am confused as to why it won't read now. The unit requires me to power cycle it after I attempt to read it just like it did when I could read it.

Well having the very same issues on another computer that has a serial port. I can't seem to locate the driver CD. Is there another way to obtain that driver?

I'm using the serial to USB adapter cable that came with it. It has worked before on this same computer. The port does show good in devices and printers. I have a laptop that has the serial port I can try.

Hey friends I am not having any luck trying to read my ASC1 Positioner. It has 20140903.01 F/W and I am using loader/editor v1.8. The tabs all just grey out when I ask it to read from device and it does not read. The com port is correct and I do have to reset the unit after trying to read it...

My companies ad on page 35...

It can still be used. It would just need a feed system (prime focus) and get rid of the old feed in the center.

And yes it has a 54 inch Venture actuator.

I simply switched out the older LNBF with the new C2PLL using the new scaler that came with it.

All I did was changed out the LNBF. Same position on the bracket and same focal point.

Here's what I have encountered so far. Changed over to the new C2W-PLL LNBF and am posting results. Before and after shots attached.

It's reported to be one of the best performers out there. The heat sink will help tremendously in a high heat environment to keep the noise temp down plus it's has phase lock loop circuitry which should help on the weak transponders and the high forward error correction. I will post results...

Thanks for the comments guys. That old antenna was manufactured abut 1978. It was one of the first of many that went worldwide. It produces great gain so I should have good results. The new LNBF should compliment the old veteran. I will post results before/after.

Will do.

Santa was good to me this year. He left this brand new C2W-PLL LNBF under the tree. Going to try it on my 11 footer in the next few days.

Bob Cooper is an old friend. He was a pioneer in the business. He worked very close with the guys I worked with in the 80's. You'll see our adds in the old Coop's digest's.

Yes that's correct a TWF-031. It didn't match up with the feedhorn that came with the antenna but I found this one and fabricated that bracket with some EMT from the local electrical supply store. Really happy with the signal levels now. Thanks for the comment.

I found this RX only feed and it matched up perfectly with the C120 LNB. This feed was on a 1.2 meter antenna. So far this is the best signals I have seen while working with this antenna. Even better signals than with the feedhorn that was on it, but that was a TX/RX system.

I went back to the 4x4 and have 2 sats on 3 receivers no problem.

Trail and error. Thanks I will check them.

Very nice. I like your fabrication. Looks great.

Fatair I have switched the receivers all around. It is the same situation. The receiver that is connected to the first diseqc switch (far left) dictates all the other ones. I must have something wrong with my configuration. I have tried different settings on the receivers and still have the...

That is the exact same one I have. I believe it to be an 1194. The 1183 is the same reflector but the feed is different.