Search results for query: *

I started new today and re-checked everything and now I have it up and running, the problem was ??? Thanks for your info jayelem. Rich

jayelem I have read that info and the info is for the SG2100 I have done al that and some more. I am trying to figure out if there is a problem with the motor or ??? The motor should not move back and forth 5 degrees and nver stop. Some thing is up with this issue. Richard

I just got a new SonicView SV-1000 and also a new dish 1 meter Fortec with the INVACOM QPH-031 LNBF ** linear + circular. -- So I removed the old dish and installed the new Stab-120 motor and aligned to the south. I installed the 1 meter dish and put the cable from the SV-1000 to the reciever...

Hello, I had it all set up running with the motor on and I got the new LNBF today and I wanted to try it out. So I ninsatted the switch and than nothing was working any more. So Iam wanting tell Tue to do the setup that the othere made. I bekieave I have everything correct but need to check it...

Hello jayelem I thought there would be many in Chicago, I was looking for a 100cm Fortec dish. I do buy alot from Sadoun but I don't like to pay the shipping on the dish $80.00 or so. I also don't want to drive to Ohio either to pick it up but that be nice to do just see and meet the guys...

That is the way I have it setup, but I will double check tomorrow when the sun comes up maybe. Thanks Richard

Hello, I will have to set up the cables like you said Tuesday it is dark here now and snowing a little it that time of the year. What do you mean here, I guess I don't understand which way from the motor. "Put the diseqc switch after the motor too."

Hello mrweather, IU will have to check it tomorrow it is dark here now and snowing a little. Thanks for the info. Richard

I didn't change the lnbs to standard left as unversal. Any thing else need to be changed, I am new this fta and multi feeds so please bare with me. Richard

I just got a new Invacom QPH-031 LNBF and I have trying to get it to work. If what I read you take a DISEqC Switch and run a cable from a L & C on lnbf to the switch in and one cable out to the motor to the RX correct? If so I have no signal at the reciever, I have a Fortec Ultra the dish is a...

Can some one tell me if they no of a few compaines in the Chicago area that sell FTA equipment retail and not wholesale only? If you have there web address it would be great. Rich

Hello, I looked at there cat alog they have it for the 25g but the 45g I did not see anything. Looked around and found one for about $100 looks like it will work just fine. Thanks fo rthe info. Rich

Anyone no where we can get a dish mount for a rohn 45 size tower. We want to mount a Fortec 90 just above the roof line. The tower is 70 feet tall. I was thinking of using a flat pcs of Alumium and getting some u-bolts and atach to the leg of the tower. Anyone no and has tried this idea? Rich

Where do we find the NYC feeds and like the races and church hill downs I had it tuned in yesterday when tunning the dish than the dish slipped and that was it. What satellite are they on? Thanks Richard

Thanks all I have it now and understand it, I got it to work just need to fine tune it yet all should be good to go. ThNAKS Rich

We are trying to get this new setup to work, we are using a Fortec 90 and there LNBF and a DiSEqC 1.2 H-H Motor. The instruction I have been trying to follow here is confusing to us here. --The RX is a Fortec Lifetime NA Classic It says to set the motor el angle to EL/Lat = 43.1 Done The one...

Well I tried to upload a new datafile to the 3000 and have another issue. I set the port and turned on the meter and found the download that I wanted to upload and open and when the upload bar shows it says Send new line 0 failed. Got any ideas? Rich

I'll give it all a try Friday it is to late here now and cold. Thanks for all the info. Rich

Hello It is a Fortec Star .4 Universal LNBF. What I don't understand is why I am getting on the signal meter about 20 accross the whole sky. I hooked the meter up to our 2 DTV setups here is verify the SatHawk 3000 is good since it is new and this the first time I am using it. I used to work...

Hello all, We are new to this great hobby FTA. We are "TRYING" to get our FIRST system working. We have a open spot for the IA5 Sat. We are using a old mounting pole that was used foe a 10 foot c-band dish it plumb and perfect. We are setting up and non motor right now. We are using a brand...

Thanks Iceberg, I had ordered a new Ultra yesterday and than I read some more and what I read the Classic was newer so I just wanted to check with some one. Oh well can't always be right. Thanks Rich

Hello all, I am new to FTA and have a question here. Which Fortec unit is better the Classic or Ultra and which is newer tech?? Rich