Search results for query: *

I have access to an DVB-S2 encoder right now and can confirm the Amiko A3 does do DVB-S2 (16APSK all FECs), SD HD MPEG2 H.264 video confirmed. It currently will not lock DVB-S2 (32APSK) transponders. Also interesting lowest SR it can lock is 1.000 MSPS for both DVB-S and DVB-S2 (X-PSK)...

I am having trouble locking the luken channels on 87w too. 7.5 ft dish. My dish is perfectly tuned to pick up the cbs fec:9/10 on 89 though. the luken mux strength varies over the course of the day i noticed.

satellite receiver and tv ON and in the signal menu. Take laptop and point webcam at TV. Skype call to my android phone on the same WIFI network. Mobile signal meter! No wires or batteries or purchases.

azbox ultra can do BISS with a plugin... there was talk somewhere online about an engineer doing this to "work from home".

my low cost solution is android phone with me at dish, and then my laptop webcam pointed at TV / FTA receiver signal menu. Then I place a Skype call

eBay or Craigslist over 1.5 years ago. The guy was in Las Vegas

espn feed encryption increases

I want a microHD for 2013

I Want to Win!!

1) YES - the majority can't though, but there do exist dvb-s2 receivers with good enough resolution output for hd 2) NO 3) NO - PCI/USB tuners are DVB-S2 but have no video capability on-board. DVB-S2 is the coding technologies used on the signal, where as HD is a label for picture quality...

Dish has the anchorage locals on a 110 spotbeam in hd 8psk also, currently fte man_pid entry.

I am in Fairbanks and am able to watch NBC, ABC, CBS, FOX, PBS from los_anchorage in HD via Free to Air. I'm don't think your legally allowed to rebroadcast these on cable, but other FTA channels that might be openly redistributable. The satellite that has the Anchorage stations in HD for free...

I want my microHD

Getting attacked by wasps as I got my first BUD satellite dish at the age of 16 with my father.

you need to skew all 3 lnb's to different skews. Although they all have very similar skews and skewing the dish to the average should do an okay job. I would skew the dish for the middle lnb and have the middle lnb set at 0 skew, then the wing lnbs will need to be skewed to the difference, one...

I have already started to build up my dish farm and wrote the software to automatically blind scan and analyze the transponders. All the information is sent to a database and I record feeds, channels, and TP parameters. The advantage is as the number of dishes and tuners increases I can blind...

Thanks for the specs. My center arm mounts to the dish on the bottom lip with some sort of plate since I have two drill holes about 1/2" from the center. Does anyone know the measurement from the bottom lip to the black lnb holder (circular part where the center arm connects)? I may end up...

if you are pointing through a patch of trees. As long as the open patch is the same size or bigger than your dish you are getting all the signal you can get. This is assuming that you are perfectly pointed through the patch. Use a laser pointer at night and place it orthogonal to the dish and...

I just picked up a 1.8 m channel master offset dish. I am missing the center lnb holder arm. I do have the black lnb holder and then two side arms. From looking at pictures it appears to be straight, is that correct? It also appears to be the same diameter pipe as the side arms, is that...

Do you know of any S-band signals? What orbital positions. I already have a S-band antenna mounted. I also have access to a spectrum analyzer. Thanks for the link, I am an experienced FTA guy getting into ham and uhf-satcom stuff. From looking at the verified list of frequencies here...

I am operating a ground station for the tracking of amateur satellites on the s-band, vhf, and uhf bands. The antennas a mounted on an AZ / EL motor. I would like to have an easy way to test the calibration of the motors by pointing at a geosynchronous satellite, preferably two of them. Does...

will this work with a 1.2 m channel master?

Yes DualOrtho22KHz With this feature I'll have to buy one now!

Could there be a lnb configuration that outputs 22kHz for Vertical TPs and 0 kHz for Horz TPs. LO would be 5150 and voltage output would preferably be always high (19V)?

is there a quick and easy way to delete all transponders on a satellite? or delete all tps except one? I do that alot usually by hand and repeatedly for 20 or so tps.