Search results for query: *

Brian, Great suggestion. They are sending one out to me. Thanks, Joe

Looking to resurrect my Micro HD receiver to use with a composite video tv. Need the A/V output cable that I thought I had. (Maybe not. Always used with hdmi) A camcorder cable will not work because the 3.5mm plug is too short. The last ring, the ground, is longer. Where can I get one? Google...

I checked only one item on the list to backup. A3 went immediately back to the previous Backup/Restore screen, same as before. Tried with another backup file. Ditto. Tried another backup file. Same result. Also tried checking several items on the list. This is what started the whole mess to...

Thanks. I'll hook it back up and give it a try when I get a few minutes. I've backed up in the past but never had this problem. Joe

In an effort to salvage my A3, I did the NAND Recovery. However, when I tried to load a backup, it started to load ,quit, and went back to the previous screen without finishing the backup. Tried several dates of backup files going back to the original backup. Tried files stored on the HD as well...

Firmware is 2.0.61 dtd 10/20/14 Locked up tonight 20% into a Ku Blindscan. Power recycle fixed it. Then ran 100% Blindscan.

Turned on A3 tonight, locked up on BOOT. Power cycled and restarted OK. I do backups to HDD and to flash drive any day I make a change of some sort, no matter how small. Joe

Turned on A3 last night. Got video but no audio on channel that I had left it on the previous evening. Changed channel, same sat. No video or audio. Changed to several other channels. Same result. Went back to original channel. Nothing. Pushing RCU buttons at random looking for some life. At...

Pardon my ignorance, but I'm a long time 4DTV, BUD, C & Ku lnb's guy. Now I have an Amiko A3 and ASCi positoner to replace the 922 receiver. I'll be changing out the 922 for the ASC1 tomorrow. When setting up the motor on the A3, what number do I put in for a sat? A count from the ASC1 or just a...

Fantastic. Thank you much. Kept missing that. Always cusored to the right to "Edit Satellite". Knew there had to be a way. Joe

How do you add a new transponder manually to the A3? All I've seen is a SCAN of the transponders listed in the list for that Sat. D/L the transponder list and add it using the Spark 2 Editor? Then how do you scan just one transponder?There must be a way to scan one transponder Joe

Martyn, you hit the problem right on. Thanks. Been away for a few weeks. When I got back, I rescanned a problem transponder. Bingo. No flashing video. Had the problem on a number of transponders/satellites. Rescanned as required to get good video again. Now I have to go back and edit the channel...

Well, back home now and did some checking. Replaced hdmi cable with an unused new one. No change. Resolution set to 1080i (but checked others). Still flashing. Now for the strange one. I have flashing video on about half of the channels in the ION mux at 3840mhz on the AMC1 bird. The others in...

Only flashes on live satellite video.

Thanks. Called away unexpectedly. Will switch out the cable when I get back and post results. Joe

Video continuously flashes. Both C and Ku. Strong signal. Video circuit shot? Joe

Brian, Kinda thought that. A shame. Thanks, Joe

Can/How can the MicroHD be networked into my home network, either wired or wireless? Until I took the Azbox Elite out of service to install the MicroHD, the Azbox was networked to my main pc mostly for viewing video files. Would like to network the MicroHD to do the same but I'm not sure that...

Brian, Just to clarify my posting, I've seen this slow response only on the Antenna Setup screen. so far. Since I'm using my DSR922 for motor and polarity control, there is no motor installed and the screen shows that. I assume that is the default condition. Just now getting around to...

Operating freely again. No lockups. Set up a c band bird @ 87W. Blind scanned same. To fix, saved what little data I had to a .udf file, did another Factory Reset, and loaded the .udf file back in. File did not appear to be loaded at first. Got "No Channel" message. Did a power recycle and the...

Yes, did a reset after updating firmware. As I noted in my posting, I had already scanned two sats without having a lockup. Although I did not have to change any of the parameters in the Antenna Setup for those Ku birds, I did access the Antenna Setup menu without a lockup. Now it locks up as...

Whenever going to Antenna Setup, the unit locks up, i.e. no response to remote on any buttons. Have to power cycle to correct. Unit is loaded with new 07/06 firmware. No motor being driven. (Menu say "No Motor") Big dish driven by 4DTV. Finally getting around to setting unit up. Blind scanned 2...

With a new, virgin microHD, is there a need to back up anything before upgrading the software, assuming an older version is loaded in the receiver? (I'm reflecting back on Ice's sticky post re upgrading a new box.) Mine has not arrived yet. Just getting ready. Joe