Social Feed
Thanks to the guys here on satellite guys - especially turbosat - I finally got my motor running and running nicely! Even though I have heard that the extreme was not good with motors. I now know otherwise.
I have an sg2100 with a 2076 winegard and viewsat extreme.
I set it up on my true south sat - AMC3 - and peaked it as good as I could.
However - when I used USALS to set it to AMC3 first - I put in a latitude and longitude that I had written on a piece of paper.
When I successfully got it running and picking up very well on other sats, I threw away the paper.
Today I went to help a guy set up his dish and took my viewsat with me because it is a great satellite meter.
We got his motor set up and running perfectly thanks to all I have learned here.
When I got back home - I did a factory reset and put in the lat and lon - and realized that I discarded the sheet of paper.
I went to look it up on the net and got SEVERAL different answers as to what they were! Are the tectonic plates constantly shifting here or what?
So I put in what I thought it was originally and could not hit the satellites as good with USALS.
So I tried changing the lat/lon settings a bit and still could not get it on the sat like I had it.
How close do the lat/lon settings have to be to run USALS?
If I use diseqc ("installer" on viewsat), I can nudge it over a little bit and get it on optimal signal/quality.
Is there a way to nudge it to optimal, and then get USALS realigned from that point?
Because when I save the position with diseqc and then click on the channel, it doesn't automatically go to the sat like USALS does.
The book isn't much help on the matter either.
If anyone knows how to make this work - please let me know - because I have FINALLY come so far!
Thanks again to every one on here!
-phil
p.s. also, does anyone know how to make the optical cable work so I can watch the PBS channels with sound. I can't seem to find the setting and it is plugged up doing nothing!
I have an sg2100 with a 2076 winegard and viewsat extreme.
I set it up on my true south sat - AMC3 - and peaked it as good as I could.
However - when I used USALS to set it to AMC3 first - I put in a latitude and longitude that I had written on a piece of paper.
When I successfully got it running and picking up very well on other sats, I threw away the paper.
Today I went to help a guy set up his dish and took my viewsat with me because it is a great satellite meter.
We got his motor set up and running perfectly thanks to all I have learned here.
When I got back home - I did a factory reset and put in the lat and lon - and realized that I discarded the sheet of paper.
I went to look it up on the net and got SEVERAL different answers as to what they were! Are the tectonic plates constantly shifting here or what?
So I put in what I thought it was originally and could not hit the satellites as good with USALS.
So I tried changing the lat/lon settings a bit and still could not get it on the sat like I had it.
How close do the lat/lon settings have to be to run USALS?
If I use diseqc ("installer" on viewsat), I can nudge it over a little bit and get it on optimal signal/quality.
Is there a way to nudge it to optimal, and then get USALS realigned from that point?
Because when I save the position with diseqc and then click on the channel, it doesn't automatically go to the sat like USALS does.
The book isn't much help on the matter either.
If anyone knows how to make this work - please let me know - because I have FINALLY come so far!
Thanks again to every one on here!
-phil
p.s. also, does anyone know how to make the optical cable work so I can watch the PBS channels with sound. I can't seem to find the setting and it is plugged up doing nothing!
13 Replies
·
3345 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/x3Zbzo-tk-s
Direct YouTube Link - Project Helix Price Rumor: Could the Next Xbox Cost $1,800? #shorts
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/x3Zbzo-tk-s
Direct YouTube Link - Project Helix Price Rumor: Could the Next Xbox Cost $1,800? #shorts
TWIT's Website
TWIT Live Feed
0 Replies
·
3 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68565 Replies
·
2675545 views
iJustine
Time for another AWESOME video from iJustine!
View: https://www.youtube.com/shorts/YxfvCOQv5uE
Direct YouTube Link - iPhone Duo Crease?
The official iJustine Website's Website
Buy her book!
View: https://www.youtube.com/shorts/YxfvCOQv5uE
Direct YouTube Link - iPhone Duo Crease?
The official iJustine Website's Website
Buy her book!
1 Replies
·
7 views
iJustine
Time for another AWESOME video from iJustine!
View: https://www.youtube.com/shorts/2KkkNffbY40
Direct YouTube Link - Reading on the iPhone Duo!
The official iJustine Website's Website
Buy her book!
View: https://www.youtube.com/shorts/2KkkNffbY40
Direct YouTube Link - Reading on the iPhone Duo!
The official iJustine Website's Website
Buy her book!
0 Replies
·
5 views
iJustine
Time for another AWESOME video from iJustine!
View: https://www.youtube.com/shorts/6t2FDCK5y40
Direct YouTube Link - Playing Xbox on the iPhone Duo!
The official iJustine Website's Website
Buy her book!
View: https://www.youtube.com/shorts/6t2FDCK5y40
Direct YouTube Link - Playing Xbox on the iPhone Duo!
The official iJustine Website's Website
Buy her book!
0 Replies
·
6 views
iJustine
Time for another AWESOME video from iJustine!
View: https://www.youtube.com/shorts/_9uczoPSEaI
Direct YouTube Link - iPhone Duo Fold Animation
The official iJustine Website's Website
Buy her book!
View: https://www.youtube.com/shorts/_9uczoPSEaI
Direct YouTube Link - iPhone Duo Fold Animation
The official iJustine Website's Website
Buy her book!
0 Replies
·
5 views
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
20 Replies
·
494 views
LOL. It depends if the person saw it during the years when they were actually still available which is 1968 to 1983 meaning the person could be 43-58 years old or they can even be a few years old if they learned to read and write at a young age and actually saw a telephone with that label somewhere recently just like even here in San Francisco, payphone still exist physically in public places but whether they can be used or not is a different issue. It still looks like this even today:
I opened my Radio Shack in Sept 1984 and right about that time they did the whole deregulation thing with the phone companies. I bought TONS of those phones that had been refurbished with a new outer shell. You could throw one of those out of a 3 story high window and it would still work.
That was an interesting time in history. I would have older customers come in and ask about phones.....they were terrified that they were going to get into trouble hooking up a second phone without the phone company knowing about it. One of the funniest episodes of WKRP was the one where Johnny thought the cops were showing up because they had an unregistered phone. I guess younger folks can't conceive of a time when you were limited to the number of phones you could have in your house....and limited to the length of the cord
That was an interesting time in history. I would have older customers come in and ask about phones.....they were terrified that they were going to get into trouble hooking up a second phone without the phone company knowing about it. One of the funniest episodes of WKRP was the one where Johnny thought the cops were showing up because they had an unregistered phone. I guess younger folks can't conceive of a time when you were limited to the number of phones you could have in your house....and limited to the length of the cord
Pub Member / Supporter
Lifetime Supporter
He was 71 yrs old. One of my favorite songs is Seminole Wind....the violin is killer.
View: https://www.youtube.com/watch?v=W8sh9P3X33w
View: https://www.youtube.com/watch?v=W8sh9P3X33w
5 Replies
·
44 views
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
201 Replies
·
5108 views
Did you people having this issue contact Brittany yet? Shes trying to keep track of things and it would be good for you to contact her as maybe she can get this somewhere and get fixed.
Now while unofficial, I am hearing this issue wasn't caused by DISH's software team, but was caused by a chipset driver update that seemes to have hosed some older USB devices. If this is indeed the case I can see why DISH didn't know and why they are slow in fixing it as they need the chipset company to fix its drivers and release them to DISH so they can be pushed out to all.
DISH does not hate you guys nor do they want you to buy new USB dongles. I am rather sure they didn't even know this was an issue until they saw it posted.
Again contact Brittany if you are having this issue, so she has your info and hopefully she can do something for you to keep you happy.
Now while unofficial, I am hearing this issue wasn't caused by DISH's software team, but was caused by a chipset driver update that seemes to have hosed some older USB devices. If this is indeed the case I can see why DISH didn't know and why they are slow in fixing it as they need the chipset company to fix its drivers and release them to DISH so they can be pushed out to all.
DISH does not hate you guys nor do they want you to buy new USB dongles. I am rather sure they didn't even know this was an issue until they saw it posted.
Again contact Brittany if you are having this issue, so she has your info and hopefully she can do something for you to keep you happy.
Thanks, but until they do, can't Dish just revert to the old driver that worked? Then test the new driver when delivered,d before pushing it again.Did you people having this issue contact Brittany yet? Shes trying to keep track of things and it would be good for you to contact her as maybe she can get this somewhere and get fixed.
Now while unofficial, I am hearing this issue wasn't caused by DISH's software team, but was caused by a chipset driver update that seemes to have hosed some older USB devices. If this is indeed the case I can see why DISH didn't know and why they are slow in fixing it as they need the chipset company to fix its drivers and release them to DISH so they can be pushed out to all.
DISH does not hate you guys nor do they want you to buy new USB dongles. I am rather sure they didn't even know this was an issue until they saw it posted.
Again contact Brittany if you are having this issue, so she has your info and hopefully she can do something for you to keep you happy.
But then what does an old CIO know! I've only reamed quite a few buttholes from my people that didn't do that!
S
dish can't revert back to older drivers or updates. although just one reason not to buy the ota dongle!!!Thanks, but until they do, can't Dish just revert to the old driver that worked? Then test the new driver when delivered,d before pushing it again.
But then what does an old CIO know! I've only reamed quite a few buttholes from my people that didn't do that!
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
www.tvtechnology.com
Pearl TV Issues Progress Report on Low-Cost 3.0 Converters in Advance of NAB Show New York
Group has secured lower pricing from key tech players to make less costly boxes available
www.tvtechnology.com
6 Replies
·
209 views
It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.
There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.