Social Feed

B
Last reply · posted in Free To Air (FTA) Discussion
I set up an sg2100 yesterday and all went great,I had almost every sat in my list with great quality,I scanned the channels,the motor would change to the proper sat when I changed the channel,last night I turned the power off and went to sleep,this morning I got up and when I turned on the power I had picture for a second and then the motor moved just enough to lose signal,then every sat i changed to was just a little off,I moved the dish back to 0 and reset the motor and the receiver,I put in my lat and my long. in the usals,then selected my ts sat,that is 87,I selected goto the dish moved,I then fine tuned the dish and the motor,got quality sig. then saved and then scaned the sat I had some channels,and as soon as I exited and the picture came on the motor moved again just a enough to loss signal,I am now lost and dont know what to do now.anyone know how to fix this or what i am doing wrong.
8 Replies · 1624 views
M
change usals setting a little... for instance, if you are on 87.0, change it to 87.5, 86.5, etc. to tweak it and save those changes. If the problem continues, it may possibly be that receiver isn't saving your changes due to tp overload?
B
change usals setting a little... for instance, if you are on 87.0, change it to 87.5, 86.5, etc. to tweak it and save those changes. If the problem continues, it may possibly be that receiver isn't saving your changes due to tp overload?
thanks for the response from everyone,what is tp overload and can I fix it,when i set 87 as my ts sat,and then move it to 123 it moves OK,and then when I move it back to 87 it is off again and every other sat is off,I will try what you said that sound like it will work,but do you know why when I make the motor move to my ts sat,I have signal,and scan the channels and go to watch them the sat moves a little.My set up is a 90cm fortec star an invocom quad lnb asg2100 and a VS ultra.
Tron
Another possible issue is the Viewsat receiver. Many of these have problems controlling DiSEqC motors, and the symptoms you are describing sound like this is the case.

I doubt the problem is TP overload, but if it is, a factory reset should solve that problem.
B
Another possible issue is the Viewsat receiver. Many of these have problems controlling DiSEqC motors, and the symptoms you are describing sound like this is the case.

I doubt the problem is TP overload, but if it is, a factory reset should solve that problem.
thank you ,I moved the motor back to 0 reset everything,put more cement around the pole and set it up again with the usals,and it is working good for the past 10 hours,I was mixing the usage of the usals and the 1.2 controls together and I think I had the reciever confused,so now I am only using the usals,so far so good, a big thanks to everyone for helping me get going,I have not had to ask for help much because of all the info in the forum,thanks to everyone that takes time to help others.
Tron
Cool! Glad you're getting good results :) The mixture of USALS and 1.2 might have confused the VS, since they have exhibited strange problems related to motor control.
Gary Toma
Staff member Pub Member / Supporter Cutting Edge
Last reply · posted in DIRECTV Technical Resources Forum
The TPN Map Excel Presents all DIRECTV Channels:
​
National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)
​
Additional tabs provide:​
OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
​
Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8​

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions
2170 Replies · 945658 views
D
DirecTV Satellite Transponder Updates for Oct 28 2026

Comparison of Transponder Data for Oct 28 2026 vs Oct 21 2026:


No changes in system tables for any transponder tuning parameters.

Changes to the use of defined transponders:

1 Transponder cleared of all Streams::
Net 15 TID 12 Beam NAT is a National Transponder on D12@103ca, TPN 13

2 Previously unused Transponders with current APG records::
Net 0 TID 28 Beam NAT + PR is a National Transponder on D16@101, TPN 29
Net 10 TID 126 Beam NAT is a National Transponder on D11@99cb, TPN 3

Stream (PID) counts:

LIVE Streams​
National​
Spot Beams​
Count​
Change​
Count​
Change​
4K​
4​
​
​
​
HD​
264​
​
1449​
​
SD mpeg4​
144​
-1​
194​
​
SD mpeg2​
434​
1​
​
​
RB​
​
​
​
​
Audio​
89​
​
​
​
Push​
26​
​
​
​
Slate​
19​
​
1​
​
​
TEST Streams​
National​
Spot Beams​
Count​
Change​
Count​
Change​
4K​
​
​
​
​
HD​
​
​
1​
​
SD mpeg4​
​
​
​
​
SD mpeg2​
​
​
​
​
RB​
​
​
​
​
Engr Work​
38​
​
​
​
​


The PID count Excel workbook provides much more count detail.

Newly updated tables of Streams on each transponder are available in the DataDigesters TPN Grids

More details of changes in individual channels will follow in the Weekly Analysis
and Gary Toma's Domestic TPN Map Excel files
A few remaps
Weekly Analysis soon
Enjoy
DataDigesters
D
Weekly Analysis for 10/28/2026:
K
ElectionHQ mixes testing with BBC News, CNBC, CNN, FBN, FNC, MSNOW, NewsMax and NewsNation

Some more reshuffles

Updating the TMSIDs for KSBI and KQCW to use the cable feeds with Thunder games instead of the OTA feeds

An additional commercial PPV channel is now on 9530
coolman302003
Monday 11/2 is a full slate for NBA League Pass as all 30 teams are playing and 14 out of 15 total games are on NBALP. Only one national TV game on Peacock/NBCSN (Thunder @ Cavs).

DirecTV is even having to use several MLB EI channels (from 745-748) and a NHL CI (770) channel to fit all of them in the guide close together. 5 games at 7:30 ET, 3 games at 8 ET, 2 games at 8:30 ET, 1 game at 9 ET, 3 games at 10 ET. Luckily NHL CI is light on Monday (3 games on CI).

DirecTV is providing both broadcast feeds for all League Pass games except Hornets, Magic, Bucks & Raptors that night. These are all teams that have local broadcasts via a OTA channel which is on spotbeams and have streaming deals (DTC) that are not exclusive DAZN teams which DirecTV just signed a deal with (à la Spurs, Grizzlies, Cavs, Pacers & T'Wolves). Its also very common that we don't get Raptors broadcast very often from TSN or Sportsnet Ontario on League Pass.

11/2/26 (MON) EASTERN7:00 PM7:30 PM8:00 PM8:30 PM9:00 PM10:00 PM
Peacock/NBCSNThunder @ Cavaliers
NBA League PassNonePistons (745) @ HornetsKings (755) @ Mavericks (756)Celtics (760) @ Rockets (761)Trail Blazers (764) @ Nuggets (765)Suns (769) @ Warriors (770)
Hawks (746) @ Pacers (747)Pelicans (757) @ Grizzlies (758)Jazz (762) @ Spurs (763)Raptors @ Clippers (766)
Nets (748) @ Knicks (751)Bucks @ T'Wolves (759)Heat (767) @ Lakers (768)
Wizards (752) @ Magic
Bulls (753) @ 76ers (754)
*No Hornets, Magic local broadcasts*No Bucks local broadcast*No Raptors local broadcast
  • Like
Reactions: Nate.O’Brien
K
Only the Knicks, Nets, Wizards, Bulls, Celtics, Rockets, Lakers, Warriors, Avalanche, Sharks and Bruins feeds will be using remaps of 24/7 RSNs that night. The rest will be relying on the part time feeds, including the Nuggets, Blackhawks and Kings who will be on their alt/overflow channels, and MSG Western NY will be live on channel 635-1 to carry Buffalo area ads during the Knicks game.

The NHL Network alternate will have Red Wings @ Panthers for those blacked out of Golden Knights @ Bruins on the main feed.

The Thunder @ Cavaliers game will be on one of Peacock Game Pass channels that night for commercial customers, they'll also have the back to back U-Conn Women's and Men's Basketball. One of the part time feeds will also be in use for WWE Raw via Joe Hand promotions.
  • Like
Reactions: Nate.O’Brien
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
3 Replies · 121 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
M
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
  • Like
Reactions: charlesrshell
Almighty1
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68662 Replies · 2680385 views
  • Like
Reactions: c-spand
RaiderPower
Take It Easy On Me - Little River Band
long_time_Dish
Take It Easy - The Eagles
  • Like
Reactions: sdfntx and gms49ers
sdfntx
Take It as It Comes - Steve Winwood
  • Like
Reactions: EatMyVolts
long_time_Dish
Take The Money and Run - Steve Miller Band
EatMyVolts
Run Joe -- Louis Jordan and his Tympany Five
  • Like
Reactions: Bobby
meStevo
Lifetime Supporter
Last reply · posted in TV Shows
Starting a thread klang !

After an amazing first 2 seasons and an 8 episode 3rd season still coming this year, season 4 has now been greenlit.

Keri Russell Wow GIF by NETFLIX
11 Replies · 981 views
  • Like
Reactions: klang
KAB
KAB
Not in a hurry to watch it this time.
K
Finished season 3 last night. Still one of my favorite shows.

Anyone else wonder if there might be something else going on with Callum? Seems to me he has too much access to Russian intelligence.
meStevo
One episode into season 4 that dropped today...

Jon Stewart Popcorn GIF
  • Like
Reactions: NYDutch
meStevo
Renewed for season 5.
K
Finished 4 last night. Great stuff.

They do like to end each season with a Bang!
Neutron
Supporting Founder
Last reply · posted in The Chit Chat Club
Patrick Stewart died yesterday, October 28th at the age of 86. We lost yet another great actor. :(

6 Replies · 47 views
dfergie
This hits hard, R.I.P. ...
Foxbat
Rest in Peace…
Bobby
Rest in peace. Long live Jean Luc Picard…
long_time_Dish
Rest in peace. Wow, so many good roles, but Jean Luc Picard will always be my favorite...
  • Like
Reactions: dfergie and Jimbo
Bobby
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
This is a thread that will keep you apprised of 4K events that will be showing on Dish channel 540. Keep looking here for information.

As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.
769 Replies · 168221 views
Bobby
MLB, Rays at Brewers, Saturday 10-24, 5PM PDT, Channel 148-01.
  • Like
Reactions: charlesrshell
Bobby
MLB, Brewers at Rays, Monday 10-26, 5PM PDT, Channel 148-01.
  • Like
Reactions: charlesrshell
Bobby
MLB, Brewers at Rays, Tuesday 10-27, 5PM PDT, Channel 148-01.
  • Like
Reactions: charlesrshell
Bobby
CFB, Florida vs Georgia, Saturday 10-31, 12:30PM PDT, Channel 148-03.
  • Like
Reactions: charlesrshell
Bobby
CFB, Wisconsin at Iowa, Saturday 10-31, 9AM PDT, Channel 148-01.
CFB, Arizona St at BYU, Saturday 10-31, 12:30PM PDT, Channel 148-01.
  • Like
Reactions: charlesrshell
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
5 Replies · 80 views
  • Like
Reactions: dfergie
dishstaller
Sorry for posting the wrong link. Just corrected it.
  • Like
Reactions: Foxbat
dfergie
I loved it when Rodney was on the Tonight Show...
Foxbat
Sorry for posting the wrong link. Just corrected it.
Thanks, I wasn't sure if you had the wrong Subject or the wrong YouTube link.
osu1991
Was a Don Rickles fan. I've dvr'd most of his appearances on Carson from the antenna tv replays.

"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
524 Replies · 48065 views
EarDemon
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
WhiteBeard
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
  • Haha
Reactions: meStevo
EarDemon
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
harshness
I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows.
What is so fantabulous about the Windows UI? By many accounts, it has been going downhill since Windows 7.

There are Linux desktops that offer Windows or Mac UIs, yet you don't hear much chatter about them outside of questions about when the creators might get sued.
  • Like
Reactions: HipKat
EarDemon
What is so fantabulous about the Windows UI?
Because it's what I prefer. I know I've said this a few times, I use Open Shell to give me the cascading start menu a la WIN 95 and NT4.0. The only reason I went from Windows Vista to 7 back in the day was because of Classic Shell. I cannot stand anything other than the OG start menu from 30+ years ago. I'm using ExplorerPatcher to give me Windows 10 UI elements of the taskbar and right click context menus.

If you could take a look at how I set up Windows 95, you'd find many similarities to how I use 11.
  • Like
Reactions: cp2k
EarDemon
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
harshness
Because it's what I prefer.
I hope you don't believe that makes it wonderful (especially when you're using workarounds for Microsoft's malfeasance).

I use LibreOffice as opposed to Microsoft office (even in Windows) because it's UI is like the Office of old, so I'm putting my money where my mouth is (in a manner of speaking). The ribbon was one of the worst ideas to come out Redmond.
HipKat
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
I used to pin the C: drive to the Win Taskbar and it would open in cascading style
"MysteryMan"
2026-10 Preview Update Builds: 26300.9818 and 26200.9818 (KB5127936) has been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.
  • Like
Reactions: Tweek
JSheridan
Actually it looks like there are a lot of features new or updated, although most are on a gradual rollout schedule.

M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
13 Replies · 757 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
Foxbat
Cough, cough. COVID vaccine implants.

:oldlaugh
That would be handy. Download the latest RNA snippets that can be updated over 5G and no more shots! You're a Genius!
  • Haha
Reactions: navychop
R
I want it and I have to have it.

I can neuter the phoning home with adguard home so it won't be doing that in my castle but I prefer without Internet so that my TVs in the house don't turn into e-waste
dishstaller
Pub Member / Supporter Lifetime Supporter
· posted in The Chit Chat Club
It states the average amount they are under water is OVER $7,000. :eek

Personally, I tend to be the type that drives a vehicle for a lot of years....do my own oil changes and other fluid changes. Just replaced the spark plugs and a couple coils. Youtube is great for things like this.

0 Replies · 20 views
  • Like
Reactions: navychop