Social Feed
At one time, I had a website that would tell you the value your motor went to for each satellite you move to.
It helps you to know that your dish is actually moving to the right place when you tell it to go to a particular satellite.
I need to check my dish and want to make sure that it is actually motoring to the correct degrees.
Does anyone know of a website or downloadable program that will tell you what this calculation is?
Thanks!
It helps you to know that your dish is actually moving to the right place when you tell it to go to a particular satellite.
I need to check my dish and want to make sure that it is actually motoring to the correct degrees.
Does anyone know of a website or downloadable program that will tell you what this calculation is?
Thanks!
10 Replies
·
1595 views
It's my experience that when my dish moves out of alignment, it's always been an azimuth problem, meaning that a gust of wind, or several gusts, have moved the mount on the vertical pole. This winter it has happened to me again. Not by too much , though.
I've had to change my USALS longitude location by 0.3 degrees to the West, to bring everything back into alignment. The same thing happened last year in winter storms, I had to adjust my USALS location to "fudge" the alignment until I could get out in the spring and ZERO it in again.
My technique is simply to go into the motor setup screen, and change the USALS longitude by 0.1 degree at a time, and allow the system to adjust. Whatever value gives my my best quality reading is the value that I keep in there. At that point, ALL the satellites are aligned correctly again. Try this technique, see if it works for you. I suspect that 90% of the alignment problems are "wind caused" azimuth errors and can be compensated for this way.
Brent
I've had to change my USALS longitude location by 0.3 degrees to the West, to bring everything back into alignment. The same thing happened last year in winter storms, I had to adjust my USALS location to "fudge" the alignment until I could get out in the spring and ZERO it in again.
My technique is simply to go into the motor setup screen, and change the USALS longitude by 0.1 degree at a time, and allow the system to adjust. Whatever value gives my my best quality reading is the value that I keep in there. At that point, ALL the satellites are aligned correctly again. Try this technique, see if it works for you. I suspect that 90% of the alignment problems are "wind caused" azimuth errors and can be compensated for this way.
Brent
You could certainly use Diseqc 1.2 mode to tune in any particular bird. USALS adjustments, though, should correct for all the satellites at once, if it is simply a problem like mine ( wind turning the dish on the pole ). It is also easier to put the correct LONGITUDE back in again to get back to the original starting place. I find USALS adjustments to be much quicker, but you might prefer the Diseqc 1.2 mode, just to "get a feel" for how many "bumps" you have to provide to optimize your tuning again.
Brent
Brent
I can't use that for TheList (I can use it to check my program with) I had some free time
so I created some formulas, they seem to work for the locations I have tested by hand, time to make a program to do the hard work, then we can decide if we want it on TheList.
It's my experience that when my dish moves out of alignment, it's always been an azimuth problem, meaning that a gust of wind, or several gusts, have moved the mount on the vertical pole. This winter it has happened to me again. Not by too much , though.
I've had to change my USALS longitude location by 0.3 degrees to the West, to bring everything back into alignment. The same thing happened last year in winter storms, I had to adjust my USALS location to "fudge" the alignment until I could get out in the spring and ZERO it in again.
My technique is simply to go into the motor setup screen, and change the USALS longitude by 0.1 degree at a time, and allow the system to adjust. Whatever value gives my my best quality reading is the value that I keep in there. At that point, ALL the satellites are aligned correctly again. Try this technique, see if it works for you. I suspect that 90% of the alignment problems are "wind caused" azimuth errors and can be compensated for this way.
Brent
I tried this. When I use USALS to change by like .3, .5., 1.0 nothing happens at all to the quality. When I use 1.2 to give the dish a "bump" west, my quality jumps into the upper 70's to 90's depending upon which satellite I am viewing. It's working out to be 1 "bump" west for every satellite.
I tried the same going EAST and the quality did go down to 0, so I am not sure what is going on, but, now I know that my azimuth is off. Thanks, Brent
Staff member
HERE TO HELP YOU!
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
42 Replies
·
3599 views
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).
On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
20 Replies
·
250 views
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.
At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.
This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.
This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=ewCzxcofBUw
Direct YouTube Link - Untitled Linux Show 275
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=ewCzxcofBUw
Direct YouTube Link - Untitled Linux Show 275
TWIT's Website
TWIT Live Feed
0 Replies
·
6 views
Supporting Founder
Lifetime Supporter
No idea what improvements might be involved.
12 Replies
·
566 views
Two bugs out and three new bugs in.
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.Two bugs out and three new bugs in.
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/E-QczD5oEh4
Direct YouTube Link - AI vs. Coders & Mathematicians: The Great Disruption #shorts
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/E-QczD5oEh4
Direct YouTube Link - AI vs. Coders & Mathematicians: The Great Disruption #shorts
TWIT's Website
TWIT Live Feed
0 Replies
·
9 views
Supporting Founder
Several Dish offers showed up today in my account. Once you choose one the rest are removed. Offers were Showtime, Starz, AMC and others.
38 Replies
·
1800 views
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.
You have a different offer that is free for a shorter timeframe which is different than the one that I and bnewt saw without defining the promotion period as I sent the question to DISH Care via Facebook Messenger and this is the response I got back 20 minutes ago.
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68512 Replies
·
2671719 views
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
540 Replies
·
18284 views
Staff member
Pub Member / Supporter
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.
If you've already reported this to me, please repost it here so I can track all instances in one thread.
Thanks!
Brittany
If you've already reported this to me, please repost it here so I can track all instances in one thread.
Thanks!
Brittany
22 Replies
·
691 views
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.
A little frustrating to have the game broken up like that but at least the Brewers won
Yea, I've only been a CIO for the last 30 years!
Trust me, when something important breaks, they get to own it!
Lifetime Supporter
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.
Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.
You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.
www.usgs.gov
View: https://youtu.be/Uecu2seh4b4
Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.
View: https://youtu.be/iws3rh5vLAQ
Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.
You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.
Monitoring Data for Kīlauea
For more information on how electronic tiltmeters and GPS receivers help monitor the deformation of Kīlauea volcano, see the HVO Deformation page.
View: https://youtu.be/Uecu2seh4b4
Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.
View: https://youtu.be/iws3rh5vLAQ
120 Replies
·
3267 views
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.
edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:
Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice
Volcano: Kilauea (VNUM #332010)
Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE
Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii
Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.
Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.
Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:
Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice
Volcano: Kilauea (VNUM #332010)
Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE
Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii
Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.
Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.
Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
- All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.