Social Feed

A
Last reply · posted in Canadian Satellite Services
I bought a satellite dish today - Dish 500, slightly larger then my BEV dish.
It is 22 1/4 x 10 1/2 inches. It is marked "Dish" - "Digital LNBF" and also
marked 119 and 110 on the LNBF's

Will that be a type of dish that can be used for BEV?

I lost more channels in Arizona this winter and would like to try a different
dish. I miss TSN the most, but also lost all of the Calgary channels and some
others.
3 Replies · 1658 views
M
it will work but it wont bring in the channels missing

The footprint of the crapelite (which are the 2 satellites that Bell bought from DirecTV) doesn't cover that part of the US...period.

no matter how big the dish, they won't come in..sadly
A
Thanks, Iceberg.
I will take the dish home to Canada where I can find a use for it. I don't have much invested. I went to a grand opening of a new Goodwill store in Mesa today and found the dish, LNB's and coax cable for $6.50.
C
When in AZ. and wanting all the Canadian programs you have to have a Star Choice system with a 30" dish size for there.
Contact Star Choice when back in Canada and find out the details.
You could set up the receiver and have it authorized on a Star Choice antenna at a dealers store and take it to AZ and set up the antenna yourself.
Gary Toma
Staff member Pub Member / Supporter Cutting Edge
Last reply · posted in DIRECTV Technical Resources Forum
The TPN Map Excel Presents all DIRECTV Channels:
​
National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)
​
Additional tabs provide:​
OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
​
Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8​

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions
2183 Replies · 960135 views
jamieh1
Now in the Hornets and Hurricanes markets we just get the TV promise screen. But Directv still charges sports fee I am assuming.
Luckily my DTV stream package doesn't have a rsn fee. Figure DTV that always says is the leader in sports would have come to an agreement by now.
  • Like
Reactions: Mr Tony
K
Now in the Hornets and Hurricanes markets we just get the TV promise screen. But Directv still charges sports fee I am assuming.
Greenville-New Bern is $11.99 for MASN (Orioles) and Nationals
Raleigh is $11.99 for MASN and Nationals
Charlotte is $12.99 for BravesVision, MASN, Nationals and Reds

The fee in NC also includes the higher in state rate they have to pay for ACCN. Down in SC the fee is $15.99 as they are also a SEC state.
I'm not sure if they're doing it with those teams, but in some markets they also use the fee to cover the additional cost they have to pay for independents and MyNet stations that picked up full season NHL and NBA rights.

If you go to the TVPromise site, you'll likely be able to get a credit for not getting the Hurricanes and additional Hornets games that air on WITN-D2

Figure DTV that always says is the leader in sports would have come to an agreement by now.
Part of the hold out might be the packaging and price for outer areas like how the Thunder needs sports pack for other states. Hopefully they are also pushing for a guarantee from the teams that they would require whoever wins their local broadcasting rights in 2028 to negotiate with MVPDs. Commercial distribution rights are probably a factor too.

I'm guessing they got a deep discount for the Clippers based on how long it took them to officially announce ClipperVision and their KTLA simulcasts after they were basically handed a multi-year draft death penalty.

The Predators and Pistons channels are using feeds supplied by Scripps Sports

The Heat likely depends on whoever they sign for the Fort Myers DMA, as there's no point in paying a high price for the Heat just for that DMA when WPLG is streaming it for free on their app and website for viewers in the Miami DMA, and they already carry the West Palm Beach station.
  • Like
Reactions: Mr Tony
K
The Heat likely depends on whoever they sign for the Fort Myers DMA, as there's no point in paying a high price for the Heat just for that DMA when WPLG is streaming it for free on their app and website for viewers in the Miami DMA, and they already carry the West Palm Beach station.
WINK-D3 (Weather) for Fort Myers

https://www.nba.com/heat/news/heat-...st-partnership-with-wink-in-southwest-florida
  • Like
Reactions: Mr Tony
K
WINK-D3 (Weather) for Fort Myers
WINK-D3 Fort Myers is testing on the stream server
  • Like
Reactions: Mr Tony
K
WINK-D3 Fort Myers is testing on the stream server
It's now live on channel 654 as HEAT on sat and stream for the Fort Myers DMA, and it looks like it's only going to only be active for the Heat games and redirect to the No Broadcast slide when it's showing the WINK radar loop.

If they are also using this feed for Heat games on satellite's League Pass, you'll probably be seeing Fort Myers ads and a WINK top of the hour ID instead of Miami ads.
D
All 3 Circle City broadcasting local channels 6-ABC, 8-CW & 23-MNTV in Indianapolis, IN are being added to both sat & stream, if not already there:

K
Nothing testing on stream yet for WISH/8 (CW) or WNDY/23 (MNT), but WRTV/6 (ABC) returned at around 11:37am ET.
D
DirecTV Satellite Transponder Updates for Nov 11 2026

Comparison of Transponder Data for Nov 11 2026 vs Nov 04 2026:


No changes in system tables for any transponder tuning parameters.

Changes to the use of defined transponders:

1 Transponder cleared of all Streams::
Net 15 TID 17 Beam NAT + PR is a National Transponder on D15@103ca, TPN 18


Stream (PID) counts:

LIVE Streams​
National​
Spot Beams​
Count​
Change​
Count​
Change​
4K​
4​
​
​
​
HD​
265​
-1​
1450​
1​
SD mpeg4​
143​
-1​
194​
​
SD mpeg2​
434​
1​
​
​
RB​
​
​
​
​
Audio​
89​
​
​
​
Push​
26​
​
​
​
Slate​
19​
​
1​
​
​
TEST Streams​
National​
Spot Beams​
Count​
Change​
Count​
Change​
4K​
​
​
​
​
HD​
​
​
2​
1​
SD mpeg4​
​
​
​
​
SD mpeg2​
​
​
​
​
RB​
​
​
​
​
Engr Work​
38​
-18​
​
​
​


The PID count Excel workbook provides much more count detail.

Newly updated tables of Streams on each transponder are available in the DataDigesters TPN Grids

More details of changes in individual channels will follow in the Weekly Analysis
and Gary Toma's Domestic TPN Map Excel files
Remapping
Weekly Analysis soon
Enjoy
DataDigesters
D
Weekly Analysis for 11/11/2026:
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68808 Replies · 2690902 views
  • Like
Reactions: c-spand
dishstaller
I Know a Little - Lynyrd Skynyrd
EatMyVolts
Little Bitty Pretty One -- Thurston Harris
long_time_Dish
My Little Town - Paul Simon
  • Like
Reactions: ClarkGable
H
Small TOWN -John Mellencamp
  • Like
Reactions: ClarkGable
ClarkGable
All The Small Things - blink-182
"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
525 Replies · 48810 views
EarDemon
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
WhiteBeard
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
  • Haha
Reactions: meStevo
EarDemon
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
harshness
I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows.
What is so fantabulous about the Windows UI? By many accounts, it has been going downhill since Windows 7.

There are Linux desktops that offer Windows or Mac UIs, yet you don't hear much chatter about them outside of questions about when the creators might get sued.
  • Like
Reactions: HipKat
EarDemon
What is so fantabulous about the Windows UI?
Because it's what I prefer. I know I've said this a few times, I use Open Shell to give me the cascading start menu a la WIN 95 and NT4.0. The only reason I went from Windows Vista to 7 back in the day was because of Classic Shell. I cannot stand anything other than the OG start menu from 30+ years ago. I'm using ExplorerPatcher to give me Windows 10 UI elements of the taskbar and right click context menus.

If you could take a look at how I set up Windows 95, you'd find many similarities to how I use 11.
  • Like
Reactions: cp2k
EarDemon
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
harshness
Because it's what I prefer.
I hope you don't believe that makes it wonderful (especially when you're using workarounds for Microsoft's malfeasance).

I use LibreOffice as opposed to Microsoft office (even in Windows) because it's UI is like the Office of old, so I'm putting my money where my mouth is (in a manner of speaking). The ribbon was one of the worst ideas to come out Redmond.
HipKat
I could probably use that as a starting point, but I don't like the full size icons. If you have to click on each folder that's also a no-go for me, it has to be cascading.

I used to have Peppermint Linux in a VM, that was about as close as I could get to recreating a Windows NT4.0 style of menu structure, but I could never get it to scale properly in VMWare on a 4K display and eventually gave up.

Whatever the boot up time it's fine with me. The longest part of my bootup is the HP SureStart BIOS integrity check. Once that is done, it's only a few more seconds. I haven't done this reg tweak yet since the reformat, but I switched the bootup animation to the Windows 10 style spinning circle of dots, and it's two and a half rotations. I can live with that.
I used to pin the C: drive to the Win Taskbar and it would open in cascading style
"MysteryMan"
2026-10 Preview Update Builds: 26300.9818 and 26200.9818 (KB5127936) has been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.
  • Like
Reactions: Tweek
JSheridan
Actually it looks like there are a lot of features new or updated, although most are on a gradual rollout schedule.

T
There were several new updates today.
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5400 Replies · 512323 views
osu1991
  • Like
Reactions: dfergie
dishstaller
Just watched Napoleon. Good night.....all of those young men dying for the egos of their leaders. Now we can kill at a distance, back then you saw the man you were killing eye to eye.
osu1991

View: https://youtu.be/0B5v6QZ5R3g?is=uXG8Z3-HITRAwxOm



Demolition Man was this afternoon's entertainment.
long_time_Dish
The rat burger and the three shells...yep, that was good stuff! :biggrin
  • Like
Reactions: n0qcu
meStevo
Wild Horse Nine was fantastic.
osu1991
Pub Member / Supporter
Last reply · posted in TV Shows
13 Replies · 337 views
Foxbat
Apparently I'm not a big enough nerd🤓 since I did not read every Marvel Comic Book ever published. If I had, I might be comparing the comics' version of events compared to what's transpiring in "Visionquest". So, I am enjoying the series a lot, not weighed down by previous expectations, knowing only the Avengers MCU movies and the "Wandavision" / "Agatha All Along" TV series.

I found the Mr Know-it-All channel from his discussion about "Star Trek: Strange New Worlds" and he's been gleefully picking these episodes apart, referencing the Marvel comics from the 1939 on. Turns out A.I. has been around since before World War II, at least in the comics. (Robots before that, yes, yes.) This show is going back into the archives.
  • Like
Reactions: osu1991
Foxbat
I'm expecting the finale to basically bring Vision into play for the Doomsday movie next month.
  • Like
Reactions: osu1991
osu1991
annoying they went with single episodes for the last two after releasing two a week for the first 3 weeks
Foxbat
annoying they went with single episodes for the last two after releasing two a week for the first 3 weeks
I thought they were effectively releasing a longer episode 7 and 8 instead of shorter episodes 7 & 8 this week and 9 & 10 next week. It felt like they were packing more into this episode.

edit: But you're right, the run time of the first three pairs of episodes was 100 minutes on average. Episode 7 clocks in at 65 minutes. 😕
  • Like
Reactions: MikeD-C05
osu1991
FYI…there are after credit scenes in the finale
  • Like
Reactions: Foxbat
ewindowman
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
477 Replies · 18056 views
comfortably_numb

Too bad their service is expensive and their coverage sucks compared to the other two of the Big 3
Juan
Too bad their service is expensive and their coverage sucks compared to the other two of the Big 3
Was that a back door compliment for Verizon?
  • Like
Reactions: charlesrshell
comfortably_numb
Was that a back door compliment for Verizon?

And TMO. If anybody's lagging behind the most, it's ATT.
ERSanders
The short term financial thinking by MBAs is what killed Xerox. Ask me how I know!
Juan
The short term financial thinking by MBAs is what killed Xerox. Ask me how I know!
I thought it was when Bill Gates stole DOS
dishdude
I thought it was when Bill Gates stole DOS

And Steve Jobs stole the mouse and GUI
ERSanders
The short term financial thinking by MBAs is what killed Xerox. Ask me how I know!
Actually I survived despite them for 31 years and two expait assignments. But the quest for the current quarter's profits doomed long term vision, planning and actions.
S
I thought it was when Bill Gates stole DOS
He bought that for $50,000. What he bought was originally called QDOS (Quick and Dirty Operating System) from Seattle Computer Products which was designed to be similar to CP/M - an OS for the Intel 8080. Seems like a decent investment. ;-)

There have been claims that the original developer of QDOS stole CP/M code and according to legend there is some command that you can type into MS-DOS that makes it print the name of the developer of CP/M, thus proving theft, but no one seems to know what that command actually is. ;-)
  • Like
Reactions: charlesrshell
fmj77
And TMO. If anybody's lagging behind the most, it's ATT.
ATT has the best service by far in my area, with Verizon being a distant second. T Mobile service is non-existent in these parts.
comfortably_numb
ATT has the best service by far in my area

I've never been to NC, but I can't think of anyplace in the Midwest or West where AT&T outperforms Verizon or T-Mobile, it seems to me they just don't have as many towers here
  • Like
Reactions: charlesrshell
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
5 Replies · 697 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell
jsmit86
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
I think it is, but I am not aware of specific differences.
My original communication of the issue was very detailed, and they had the team work on it and felt they knew what was causing the issue.
The rollback to 708 confirmed that 708 did not have that problem.
I got an email in late October asking if I would be open to checking if a beta version had the problem. I agreed to the test, and it did not have the dolby problem.
david_jr
Not sure if it was this update or a previous one, but both my H3's had the bug where I couldn't use FF without screwing up the recording permanently. If I tried 60X for instance it would fast forward for a bit then go to the end of the recording and not let me get back to where I was trying to get no matter what. The temp fix was to use the skip ahead which for whatever reason still worked. Annoying having to skip ahead through 8 minutes or so of commercials on live sports talk recordings. Well it is now fixed, but not sure when that happened because I haven't had the nerve to try FF until this last week when I discovered it had been fixed. Working properly now on both my H3's. However my Dish Anywhere app is still not allowing me to use both H3's as feeds out. Tested this again a few days ago with my son and we both couldn't watch at the same time, even though we were connected to the other H3. If he was using DA and I attempted to use it with the other H3, it would bring up a message stating another user was using DA and do you want to take over. Very frustrating hoping they fix this soon.
  • Like
Reactions: charlesrshell
Bobby
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
This is a thread that will keep you apprised of 4K events that will be showing on Dish channel 540. Keep looking here for information.

As of today, 9-27-17, there are no scheduled events posted for the next 2 weeks. That is subject to change on a daily basis.
773 Replies · 169565 views
Bobby
CFB, Wisconsin at Iowa, Saturday 10-31, 9AM PDT, Channel 148-01.
CFB, Arizona St at BYU, Saturday 10-31, 12:30PM PDT, Channel 148-01.
  • Like
Reactions: charlesrshell
Bobby
CFB, Alabama at LSU, Saturday 11-7, 12:30PM PST, Channel 148-03.
Bobby
CFB, UCLA at Minnesota, Saturday 11-7, 9AM PST, Channel 148-01.
CFB, Iowa at Northwestern, Saturday 11-7, 4:30PM PST, Channel 148-01.
  • Like
Reactions: charlesrshell
Bobby
CFB, Texas at LSU, Saturday 11-14, 4:30PM PST, Channel 148-03.
Bobby
CFB, Northwestern at Ohio St, Saturday 11-14, 9AM PST, Channel 148-01.
CFB, Utah at Arizona, Saturday 11-14, 4:30PM PST, Channel 148-01.
  • Like
Reactions: charlesrshell
Foxbat
Supporting Founder Pub Member / Supporter Lifetime Supporter
Last reply · posted in Computers and Gadgets
Hmmm, Apple iCloud appears to be missing from the Internet. Attempting to connect yields:
1794355836427.webp
Plus, lots of prompts to enter my iCloud credentials.
1794356039809.webp​
3 Replies · 91 views
K
I'm not seeing any issues.
meStevo
looks like an incident is clearing up


1794358560136.webp
  • Like
Reactions: Foxbat
Foxbat
The Apple Support System Status page is showing mostly green now, with Resolved status for the outage that started 17:49 and ended around 19:22 (I guess EST)
1794359273616.webp