Social Feed

Rukes
Last reply · posted in DISH Network Support Forum
I'm posting this here in hopes that Dish will see the need for this long promised feature. I called the Tech Chat people today during the chat to see what was up. They said it isn't planned, but they would pass it along.

Of course those of us who want this feature have been waiting a while, since way back on May 8, 2006th's Tech Chat, this question was asked:

Q: Rodney (phone): Native resolution pass through. Why not?
A: We are going to implement this in the near future (probably this summer). Apparently overlooked. "I'll get that done."

So here we are, two years later, with still no word on a great feature that is sorely needed for those of us on 4x3 HDTV sets.

I currenty have a Sony 36" with 480p and 1080i as both my native resolutions, so it is a severe pain to switch back and forth. Its getting a bit annoying, now that equipment such as the HD TiVo, the Playstation 3 and even the basic cable DVR Moxi all support this feature to make life easier :)
6 Replies · 1847 views
Pepper
The component input on my set accepts 480p and 1080i. 480p is 4x3 and 1080i is 16x9.

If the dish receiver switched automatically, I wouldn't have to adjust things every time we view a 4x3 SD channel. As it stands, I either have to switch to the S-video input on the TV, or adjust the resolution manually.
N
If the dish receiver switched automatically, I wouldn't have to adjust things every time we view a 4x3 SD channel. As it stands, I either have to switch to the S-video input on the TV, or adjust the resolution manually.

I understand your problem, and it's unique to the 4:3 set. You of course want to use its full real estate for native SD 4:3 material rather than watch a box-within-a-box picture. As more and more HD (16:9) programming takes over, your problem will go away, and you can just watch in 16:9 mode. Or eventually you'll probably end up with a new 16:9 set.

In the mean time, if the receiver switched automatically (native pass through), you would encounter another set of problems, mainly 720p programming. Since your set could not display those feeds (ABC, FOX, ESPN, etc), you would have to manually switch back to fixed 1080i.

Is switching inputs on the TV from S-video to HD that difficult? I thought Sony had a quick input button on the remote.
Rukes
I understand your problem, and it's unique to the 4:3 set. You of course want to use its full real estate for native SD 4:3 material rather than watch a box-within-a-box picture. As more and more HD (16:9) programming takes over, your problem will go away, and you can just watch in 16:9 mode. Or eventually you'll probably end up with a new 16:9 set.

In the mean time, if the receiver switched automatically (native pass through), you would encounter another set of problems, mainly 720p programming. Since your set could not display those feeds (ABC, FOX, ESPN, etc), you would have to manually switch back to fixed 1080i.

Is switching inputs on the TV from S-video to HD that difficult? I thought Sony had a quick input button on the remote.

The thing you are forgetting is that all other DVRs and equipment that offer native resolution passthrough don't just automatically force whatever it is. That would be pretty bad.

They offer a checkbox list of your TV's supported resolutions and you check what your TV supports. In our case, 480p and 1080i only. That way when it detects HD, it just goes to 1080i all the time, and when it doesn't, it goes to 480p.
T
There's really two facets to the native resolution discussion that's taken place for some time now, including in a previous thread I originated. There are some who are looking for the full extent of NRP, which would pass any resolution that the networks might transmit in. This obvious presents some compatibility issues and challenges of its own.

This is different and more complex than what those with 4x3 displays are looking for, which is simply SD/HD passthrough. 480i or 1080i would satisfy most, if not all, of this group.
kstile
I was in that group of 4x3 HDTV owners wanting to use all the screen's real estate for SD content. That is, until I got my new TV :-) (Panasonic 50" Plasma). My solution was my Harmony remote - I had one button called "Watch TV" and one called "Watch HD" the only difference was that it switched the input on the TV from DVI (1080i from the HDMI port on the 622) to S-Video. Kind of a pain, but it did it quickly.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68631 Replies · 2678969 views
  • Like
Reactions: c-spand
H
PEOPLE Are Strange-The Doors
harshness
Still Loving You - Scorpions
Bobby
PEOPLE Are Strange-The Doors

You're Still A Young Man - Tower Of Power
No Match, back to:
People Are Strange - The Doors




Isn't Life Strange - The Moody Blues
FTA4PA
Strange Days - Nazareth
  • Like
Reactions: dishstaller
gms49ers
Dancing Days - Led Zeppelin
dishstaller
Dancing in the Street - Van Halen
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 2 views
TRG
TRG
Pub Member / Supporter
Last reply · posted in Local Radio Discussion
20 Replies · 583 views
dishdude
It's probably been 2 decades since I've listened to an AM radio station. Very rarely listen to FM any more.
  • Like
Reactions: reubenray and Jimbo
Jimbo
I am 1 that wants the AM to Stay ....
That said, since '08 I have had Sat radio available to me ... I think I have turned on AM 3 or 4 times, just to see if its still there.

Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Even FM, I haven't really had on since '13ish, I may turn it on from time to time, just to see if its still there.
harshness
Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Automation has seen to that. You can't get evening drive traffic reports where I live, much less disaster reports.
dishstaller
Very rarely listen to FM any more
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
  • Like
Reactions: Mr Tony
Jimbo
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
dishstaller
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
No, just regular FM stations. One is the country station I mentioned and the other is a Talk Radio station which used to get fantastic results but honestly, since the death of Rush Limbaugh, talk radio just doesn't do as well. There were two guys who had an early morning show which was hugely popular here in the southeast but one of them retired a couple years ago and the show just doesn't garner the same numbers as it used to.
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
Apple Fall Hardware Event takes place today, September 9, 2026, at 10:00 a.m. PT / 1:00 p.m. ET. It marks the debut of new CEO John Ternus and the expected reveal of Apple's first foldable phone.
135 Replies · 1639 views
comfortably_numb
Can't remember if I've posted this yet..


View: https://www.youtube.com/watch?v=nfL5seXJyWU
  • Haha
Reactions: slow_poke_pete
Foxbat
IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.
​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.
S

most carriers do. that's why they send updates that slow phones down!! i buy unlocked phones no effect to me
S
IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.
​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.

hope you have apple care a screen job is 1000.00 :oops:. can we say over priced garbage!!!
harshness
Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.
comfortably_numb
Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.

Or better yet, innovate something "completely revolutionary!"
SkyWatcher57
Pub Member / Supporter
Last reply · posted in Free To Air (FTA) Discussion
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
47 Replies · 1292 views
(((Garyd)))
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
  • Like
Reactions: navychop
S
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
a good surge protector will help to.
  • Like
Reactions: SkyWatcher57
SkyWatcher57
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
Hi Gary, still working on getting you those
Hi Gary, just saw this, ok, I'll grab some pics tomorrow and post them. thx
Still working getting you those pictures, nice weekends means yard work and fall prep, thanks
  • Like
Reactions: (((Garyd)))
k4otl
Anybody know how to add "hidden" audio channels like for 101 W Ku or 105W C band on these recvr's? I've exported the database file but don't have anything that will read or edit it.
cyberham
For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.
k4otl
For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.
Seems like I remember that now, with my V9 I manually entered anyway on 105, easier for me to pick the channel later :)
T
Last reply · posted in Free To Air (FTA) Discussion
IS Amiko MIRA 3 any good ???
Can you recommend the best to cover all bases. NO BEEPS on certain channels 101w (NEWSMAX ,NEWS NATION), a clock that keeps working STEADY for timed recording ,solid unit with good lifespan. My Amiko died AND my Linkbox has NO Favorites Button and BEEPS on many channels. Picking up 105 west with a NEW SHED IN THE Way with 6 foot Cband ..95 percent quality ...unbelievable.
10 Replies · 269 views
T
Have you tried a new power brick on your Amiko?

YOU WERE RIGHT. IT IS WORKING NOW WITH 2X AMPS !!

DAN
primestar31
Have you tried a new power brick on your Amiko?

YOU WERE RIGHT. IT IS WORKING NOW WITH 2X AMPS !!

DAN
That's great!

Many people have all sorts of power bricks laying around. Provided the plug fits, and it's the right polarity and same voltage and the same OR higher amps, why not try another one IF the device you want to try it on doesn't seem to work right.
  • Like
Reactions: cyberham
JFOK
That's great!

Many people have all sorts of power bricks laying around. Provided the plug fits, and it's the right polarity and same voltage and the same OR higher amps, why not try another one IF the device you want to try it on doesn't seem to work right.
primestar31,

Could you explain to me what a power brick is ?
Thanks,

John
primestar31
primestar31,

Could you explain to me what a power brick is ?
Thanks,

John
Some people just call them power supplies (which really isn't a good fit in this case), some call them "wall adapters" but it's an external power supply or AC adapter that converts (AC) from a wall outlet into low-voltage (DC) that an electronic device needs to run.
  • Like
Reactions: JFOK
T
[Give us a summary of what you receive with a 6-footer. I'm very curious.]

Right now on C band getting 105w, a Mexican channel with 95% quality and I am near Detroit! I'm recording a TECHNO MUSIC FESTIVAL today from Mexico ..if you can believe it.....and yes that SHED is partly in the path so I'm puzzled. There are also christian channels on 105w.
cyberham
...Right now on C band getting 105w, a Mexican channel with 95% quality...
105W has some very strong transponders. I received more than four transponders using a 41-inch dish recently. See here.
k4otl
[Give us a summary of what you receive with a 6-footer. I'm very curious.]

Right now on C band getting 105w, a Mexican channel with 95% quality and I am near Detroit! I'm recording a TECHNO MUSIC FESTIVAL today from Mexico ..if you can believe it.....and yes that SHED is partly in the path so I'm puzzled. There are also christian channels on 105w.
The Westwood One Mux on 105W would likely be receivable, has some good music channels on there. It does scan in, but it's more convenient to manually enter the PIDs, check out Lyngsat for the channels: EchoStar 105/SES 11 at 105.0°W - LyngSat

I use a 10 footer (only C-band dish I have), but it's very strong.