Social Feed

Voyager6
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Computers and Gadgets
I am looking for a 36" - 42" plotter to print construction drawings. I work for an excavation company and many of the drawings are now available in electronic form (pdf, dwg, dxf). Our estimating software can import the dwg/dxf formats but not pdf. We need to be able to print out the drawings for estimating/field use (b&w only) and also drawings with cut/fill shading (color). We contacted two local printing companies and the recommendations were 1) Canon iPF 710 36" for $4,000 and 2) HP T1100 44" for $6,800. Both of these plotters are much more than we need. So, I am now looking for a refurbished plotter such as the HP 750C or 1055CM. I have also looked at refurbished Designjet 500 and 800 but both are priced near the new cost for the Canon iPF710. I don't want to buy something that will be totally obsolete but I also don't need a new high-volume plotter either. Any suggestions would be appreciated.
1 Replies · 3254 views
Voyager6
Well, after much review and research, I decided upon a refurbished HP 755CM plotter. It has the Postscript card, JetDirect card and a full load of ram. Price was very good.



Description

s.gif
s.gif
s.gif
s.gif
s.gif

[FONT=Arial, Helvetica, sans-serif]Item Specifics - Item Condition[/FONT]
[FONT=Arial, Helvetica, Sans-Serif]Condition: [/FONT]Refurbished


s.gif

[FONT=Arial, Helvetica, Sans-Serif]Printing Color : [/FONT]COLOR


[FONT=Arial, Helvetica, Sans-Serif]Brand : [/FONT]HP




[FONT=Arial, Helvetica, Sans-Serif]Printing+Color : [/FONT]B/W+&+Color


[FONT=Arial, Helvetica, Sans-Serif]Product Type : [/FONT]Plotter





s.gif
s.gif
s.gif
s.gif

s.gif
s.gif
s.gif
s.gif
HP D e s i g n J e t 755CM
Only 4450+/- Prints



Works on printing to USB port
BRAND NEW BELT!!!
36" Large Format - Up to 36" rolls
4-Color Ink System
Dual paper format: ROLL FEED w/ Auto Cut or SHEET FEED
Paper Catch Bin
ADDED RAM: 72 MEGS INSTALLED (75MB TOTAL)
optional POSTSCRIPT card INCLUDED - print PDF's
optional NETWORK card INCLUDED
Pedistal, legs & 4 swivel, locking casters included
EXTREMELY LOW USE: - WOW!!!
Print: Postscript fonts, PDF files, Autocad files (dwg), Jpeg, Tiff, Bmp. With the postscript card we include you can do alot more than the others plotters sold without it.


Product Description

tn_plotter%20copy.jpg
This plotter just came in from our resource center with an extremely low page count. As with all our 755CM plotters, we REPLACE the MAIN BELT with a BRAND NEW ONE! The display screen is bright and crisp. Other sellers DON'T list the page count for obivious reasons. Even though these plotters are tough everything still goes through cyclic use. Ours typically have extremely low use.
HP DesignJet 755CM Plotter: a true 'work horse' in the designjet family. Simply put, HP made this plotter practically bomb proof. Performance condition is good. Sample printing ability with the right settings, paper, ink and image quality can be seen with the stock examples shown. Smooth operation and simple digital display interaction and push button control.
The 755CM is capable of delivering color images and color cad line drawings. A good choice for people who want a "reasonably priced" system to solve plotting needs.
Unattended plotting with the paper bin and auto paper cutter is very convenient. Low cost printing is possible. Easily buy your replacement ink on ebay for around $10 a cartridge. A standard black cartridge is regularly stocked at places like Staples, Circuit City, Best Buy, Office Max and Office Depot for about $30. So it's easy to still get ink.
Excellent plotters for bid take-offs. Are you getting tired of supporting your over-priced Kinkos or local print shops with $50, $100, $200 or even more print jobs. Your own print jobs can average $0.25 per sheet? That's right, get ink on ebay and find a local paper source for about $14 per 150 foot roll and your typical black & white 5% coverage line plot will be right at 25 cents per 2'x3' sheet.
Product Features:

Graphic Languages HPGL, HPGL/2, HP-RTL, PJL, POSTSCRIPT(R) Margin Settings 3/8" to 5/8" Media Formats Single Sheets or 150' Rolls Media Types Plain, Vellum, Translucent, Polyester, Special Inkjet Resolution 300x300 and 600x600 DPI Accuracy +/- 0.2% of specified vector length @73F, 50-60% RH, HP Matte Ink Cartridge Black 51645A (Black) Ink Cartridges Color 51644C (Cyan) 51644M (Magenta) 51644Y (Yellow) Standard Memory 4mb built in (we ADD an additional 72 MB!!!) Optional Card Postscript Postscript Romm (INCLUDED at NO ADDITIONAL CHARGE) Optional Card Network HP JetDirect Card (INCLUDED at NO ADDITIONAL CHARGE) Unit Weight 155 lb Dimensions 54" Wide, 28" Deep(Base Leg portion), 44.25" Tall OS Environments Windows 95, 98, NT4.0, 2000, Me, XP Features:

Final quality up to E size (36" x 48") sheets or 50' Banners
Black check line plots on plain bond or translucent paper in as fast as 2 minutes,
Color about 7 minutes on coated paper
Crisp, clean 600dpi addressable black output,
Crisp, clean 600dpi addressable color line output
Vibrant 300dpi color (16.7 million variations)
Full gray scale shade possible
Automatic cutter with ON/OFF control,
Color cartridges not included
Wireframe Output BIN for unattended plotting ($355.00 value),
Queuing and nesting control on computer or display,
Possible Printing Connections: LPT Centronics, parallel/USB, int. or ext. LAN Network Jetdirect
INCLUDED EXTRAS
  • Existing Black ink/printhead FULL ($32)
  • RAM upgrade ($95.00)
  • Postscript Card ($375.00)
  • HP JetDirect LAN Network Card Upgrade($285.00)
  • Power Cord($8.00)
  • Cat 5 network cable($15.00)
  • New 150 feet roll of paper($15.00)
  • CD includes: drivers, service manual, user manual, setup manual, quick reference sheet, & parts list (w/ part numbers)(priceless)
If you have any problems with the black printhead, email me. I will share a simple solution for unclogging any printhead with simple cleaning solutions you probably already have. I've used this technique on ink cartridges that have been sitting in the open for over a year and they still worked.
Stock Photos

​
PLOTTER Connections Model Photo Display
​
​
POLY LENS COVER​
Stock Photo for Color Tests​
CALIBRATED PARTS​
HP INK CHART​
​
​
​
​
Stock Photo Sample​
Stock Sample Plot​
Stock Sample Plot​
HP PAPER CHART​

Daily Performance:

"Normal" printer use:

"Normal" printer use means less than:
  • 40 pages per day (if medium-density E/A0 CAD plots), or
  • 10 pages per day (if medium-density E/A0 image prints
The reliability of the HP Designjet 757CM printer will be maximized by maintaining an output volume within 40 EA0-size plots per day on average. Plotter can support the occasional need for UP TO 100 plots per day, but the regular use of the HP Designjet plotter above an average of 40 plots per day may result in increased maintenance requirements.

About Us: Absolute Business Solutions

pic.jpg
Background: ABS is a 15 year professional company that specializes in 3 simple goals: acquire surplus equipment, refurbish and market for re-application at heavily discounted prices. Add our committment to providing honest work ethics and commitment to quality and the end result: Quality refurbished equipment, huge savings and happy customers.
This approach works best for people who are looking for good used equipment (minor cosmetic blemishes) but without the retail budget or the requirement of new condition. Blemishes are from being in a normal business environment and from surplus transporation. Meaning, don't expect the unit to be cosmetically flawless. If you are looking for this, then please buy new equipment. We do promise the blemishes will not affect the performance nor will it look extremely different than the samples above. If you have any questions or need clarification, please email or call before placing bid.
Recent Expansion: We have a HP certified service technician on our knowledgable team. This enables us to go through and perform many steps such as:
  • service configuration
  • ink calibrations
  • x-axis calibration
  • y-axis calibration
  • bear lubrication
  • auto cutter test
  • drop detect sensor test
  • auto-feed test
  • paper alignment test
  • gear/lube checks
  • belt travel
  • service station travel
  • gluide rod lubrication
  • internal print tests
  • controls test
This translates to end-user satisfaction.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68631 Replies · 2678978 views
  • Like
Reactions: c-spand
H
PEOPLE Are Strange-The Doors
harshness
Still Loving You - Scorpions
Bobby
PEOPLE Are Strange-The Doors

You're Still A Young Man - Tower Of Power
No Match, back to:
People Are Strange - The Doors




Isn't Life Strange - The Moody Blues
FTA4PA
Strange Days - Nazareth
  • Like
Reactions: dishstaller
gms49ers
Dancing Days - Led Zeppelin
dishstaller
Dancing in the Street - Van Halen
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 5 views
TRG
TRG
Pub Member / Supporter
Last reply · posted in Local Radio Discussion
20 Replies · 583 views
dishdude
It's probably been 2 decades since I've listened to an AM radio station. Very rarely listen to FM any more.
  • Like
Reactions: reubenray and Jimbo
Jimbo
I am 1 that wants the AM to Stay ....
That said, since '08 I have had Sat radio available to me ... I think I have turned on AM 3 or 4 times, just to see if its still there.

Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Even FM, I haven't really had on since '13ish, I may turn it on from time to time, just to see if its still there.
harshness
Fwiw, if theres a Major disaster or bad weather or whatever, the chances of me finding out about it by going to the AM side of the radio is SLIM and None.
Automation has seen to that. You can't get evening drive traffic reports where I live, much less disaster reports.
dishstaller
Very rarely listen to FM any more
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
  • Like
Reactions: Mr Tony
Jimbo
That goes for a lot of people. I've been advertising on radio for more than a decade now and am very familiar with this subject. While it is still a valuable tool, it has far less impact than it did just a few years ago. The best reaction I get is from a local Country music station....they play a mix of older and newer music and have a very big footprint.
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
dishstaller
Do you do any Ad's on Satellite ?

If Not, why not, because it's not Local ?
No, just regular FM stations. One is the country station I mentioned and the other is a Talk Radio station which used to get fantastic results but honestly, since the death of Rush Limbaugh, talk radio just doesn't do as well. There were two guys who had an early morning show which was hugely popular here in the southeast but one of them retired a couple years ago and the show just doesn't garner the same numbers as it used to.
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
Apple Fall Hardware Event takes place today, September 9, 2026, at 10:00 a.m. PT / 1:00 p.m. ET. It marks the debut of new CEO John Ternus and the expected reveal of Apple's first foldable phone.
135 Replies · 1640 views
comfortably_numb
Can't remember if I've posted this yet..


View: https://www.youtube.com/watch?v=nfL5seXJyWU
  • Haha
Reactions: slow_poke_pete
Foxbat
IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.
​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.
S

most carriers do. that's why they send updates that slow phones down!! i buy unlocked phones no effect to me
S
IFixIt has published their Teardown and they had some positive things to say about the iPhone Duo. It still showed some dust ingress into the hinge assembly but seemed otherwise well-sealed.
​

But with a considerable number of reports of the main screen dying with similar failures, AppleCare+ should be a no-brainer for this phone.

hope you have apple care a screen job is 1000.00 :oops:. can we say over priced garbage!!!
harshness
Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.
comfortably_numb
Gone are the days when Apple "perfects" what debuted years earlier on an Android phone.

Or better yet, innovate something "completely revolutionary!"
SkyWatcher57
Pub Member / Supporter
Last reply · posted in Free To Air (FTA) Discussion
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
47 Replies · 1293 views
(((Garyd)))
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
  • Like
Reactions: navychop
S
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
a good surge protector will help to.
  • Like
Reactions: SkyWatcher57
SkyWatcher57
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
Hi Gary, still working on getting you those
Hi Gary, just saw this, ok, I'll grab some pics tomorrow and post them. thx
Still working getting you those pictures, nice weekends means yard work and fall prep, thanks
  • Like
Reactions: (((Garyd)))
k4otl
Anybody know how to add "hidden" audio channels like for 101 W Ku or 105W C band on these recvr's? I've exported the database file but don't have anything that will read or edit it.
cyberham
For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.
k4otl
For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.
Seems like I remember that now, with my V9 I manually entered anyway on 105, easier for me to pick the channel later :)
T
Last reply · posted in Free To Air (FTA) Discussion
IS Amiko MIRA 3 any good ???
Can you recommend the best to cover all bases. NO BEEPS on certain channels 101w (NEWSMAX ,NEWS NATION), a clock that keeps working STEADY for timed recording ,solid unit with good lifespan. My Amiko died AND my Linkbox has NO Favorites Button and BEEPS on many channels. Picking up 105 west with a NEW SHED IN THE Way with 6 foot Cband ..95 percent quality ...unbelievable.
10 Replies · 270 views
T
Have you tried a new power brick on your Amiko?

YOU WERE RIGHT. IT IS WORKING NOW WITH 2X AMPS !!

DAN
primestar31
Have you tried a new power brick on your Amiko?

YOU WERE RIGHT. IT IS WORKING NOW WITH 2X AMPS !!

DAN
That's great!

Many people have all sorts of power bricks laying around. Provided the plug fits, and it's the right polarity and same voltage and the same OR higher amps, why not try another one IF the device you want to try it on doesn't seem to work right.
  • Like
Reactions: cyberham
JFOK
That's great!

Many people have all sorts of power bricks laying around. Provided the plug fits, and it's the right polarity and same voltage and the same OR higher amps, why not try another one IF the device you want to try it on doesn't seem to work right.
primestar31,

Could you explain to me what a power brick is ?
Thanks,

John
primestar31
primestar31,

Could you explain to me what a power brick is ?
Thanks,

John
Some people just call them power supplies (which really isn't a good fit in this case), some call them "wall adapters" but it's an external power supply or AC adapter that converts (AC) from a wall outlet into low-voltage (DC) that an electronic device needs to run.
  • Like
Reactions: JFOK
T
[Give us a summary of what you receive with a 6-footer. I'm very curious.]

Right now on C band getting 105w, a Mexican channel with 95% quality and I am near Detroit! I'm recording a TECHNO MUSIC FESTIVAL today from Mexico ..if you can believe it.....and yes that SHED is partly in the path so I'm puzzled. There are also christian channels on 105w.
cyberham
...Right now on C band getting 105w, a Mexican channel with 95% quality...
105W has some very strong transponders. I received more than four transponders using a 41-inch dish recently. See here.
k4otl
[Give us a summary of what you receive with a 6-footer. I'm very curious.]

Right now on C band getting 105w, a Mexican channel with 95% quality and I am near Detroit! I'm recording a TECHNO MUSIC FESTIVAL today from Mexico ..if you can believe it.....and yes that SHED is partly in the path so I'm puzzled. There are also christian channels on 105w.
The Westwood One Mux on 105W would likely be receivable, has some good music channels on there. It does scan in, but it's more convenient to manually enter the PIDs, check out Lyngsat for the channels: EchoStar 105/SES 11 at 105.0°W - LyngSat

I use a 10 footer (only C-band dish I have), but it's very strong.