Social Feed
Hello all, new DISH customer here!
I had Dish installed yesterday and reprogrammed my 880 for the VIP 722. A few features I can't seem to find in there....
First and foremost, the DVR....I can't find this anywhere in the 880's menus or shortcuts. Can I program that? On the packaged remote, it's a nice big easy to find button.....
Second, page up and page down, can those be added?
And last, ffwd and rew 30 seconds in DVR, can those be added?
Thanks all!
:
I had Dish installed yesterday and reprogrammed my 880 for the VIP 722. A few features I can't seem to find in there....
First and foremost, the DVR....I can't find this anywhere in the 880's menus or shortcuts. Can I program that? On the packaged remote, it's a nice big easy to find button.....
Second, page up and page down, can those be added?
And last, ffwd and rew 30 seconds in DVR, can those be added?
Thanks all!
:
21 Replies
·
4254 views
I had a similar problem to the OP and to KAB, except I have a 622, not a 722. Before I bought my 880 I had read your suggestion about specifying the 942 as the model number. It sounds like a great idea. But it didn't work for me. The 880 could not send any recognizable commands to my 622 when I had it programmed as a 942. So I started over and reprogrammed the 880 to tell it I had a 622. Still nothing. I was not just missing one command. I was missing all commands. Logitech appears to have a very screwy database for Dish receivers.
Like KAB, my problems were solved only by a call to Logitech tech support. They were very helpful and had me up and running in less than 15 minutes, but still stayed on the line until I had tested many commands. The fix involved them walking me through teaching the 880 several commands. After I taught it the third command, a message popped up on my computer screen saying a better command set had been found, and would I like to switch to it. Tech support told me to say "Yes". I did. And after that all was well.
I still had a few minor problems finding commands in Logitech's list when I wanted to set up some soft buttons. They appear to be all there, but Logitech's names for some commands differ from the names on the Dish remote buttons, and sometimes the correspondence between Logitech's names and Dish's names is unclear.
Finally, thanks to Hopton for the great tip on setting up DVR (x2). I will do that tonight.
:On second thought, I will try eddie willers suggestion of using the PVR command first, if it is in the list I see.
::
I've done over a hundred and they have all defaulted to Dish's remote code IR 1. No trouble at all.
The only time I do an IR 'learn query' is when I want to set up a different Dish receiver in the same room (as when I had two 501s in my stereo rack) and I need to change the remote code of the Dish (and the Harmony, of course) to something other than "1. (I do this by taking the Green #1 Dish remote....setting it to, say, code #2...and then after a few commands while pointed at the harmony it says "Oh....I recognize this". Saves a bit of time but the database for anything other than code #1 is woefully incomplete.
I recommend the Dish DVR 942 because it has discrete Power On and Power Off in it's database. The 622 does not. (BTW...the 501 also has the discretes. I just say use the 942 because the 501 is so old now that I think some newer readers would scratch their heads).
BTW...if you want to change from the default Power Toggle, go to the software set up and click the Device Tab. Click 'Settings' in the Dish receiver block. Click 'Adjust power settings'. Click 'I want to turn off this device when it's not in use'. Click 'A button on the remote for On, and a different button for Off'. Check the 'I don't have the original remote, but I know the command that is used:' button and then choose 'Power On'. (It should be the first selection in the drop down box). Be sure to un-check the 'My device needs more than one command to turn it on and off' should it automatically fill in as it often does.
Click Next and do the same for the 'Which command will Power Off your device?' query.
Again....remember to un-check the 'My device needs more than one command to turn it on and off' (by going back and filling in the 'I don't have the original remote, but I know the command that is used:' button)
Why discrete ON / Offs? ...(well if you actually DO want to turn it On/Off), when a command gets blocked and you hit the 'HELP' button on the Harmony, it sends out all discrete commands at once (since they do no harm....unlike a toggle).
If the Dish receiver was Off...it will turn on then and you can simply press 'Yes...that fixed the problem', rather than having to go through a bunch of 'HELP' wizard questions before it finally gets around to the 'Is your PVR On? Yes/No...blah, blah, blah.
And as a final aside....if you really DO want to turn off your receiver, go back to the Activities Tab, click 'settings' on your Watch TV activity (whatever you named it). Select 'Review the settings for this Activity' then Next. Select 'Yes, but I want to add more control of options and devices for this Activity' then Next.
Continue going through the Wizard until you get to the 'Please review the actions for your Watch Television Activity:' page. Go down to the bottom section that says "When you leave this Activity, these devices are turned off and the following actions occur:' and change the drop down box in the 'Add Action for' to the Dish receiver. and after the 'when the Activity stops' on the same line, click 'Add' and select the button besides 'Send this infrared Command:' and set the command to 'View'. Continue on through the rest of the Wizard and update the remote.
The reason I say to do this is that since you may be 'paused up' when you hit the Off button on your Harmony, the dish receiver will say "You Must Go Live" but you will not see this prompt since the TV is off
.Having the Harmony send "View" before "Off" will avoid this.
Selah
Lifetime Supporter
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
444 Replies
·
15196 views
Can't remember where or who I saw predict this.
It wouldn't surprise me to see Elon soon own all of DISH / Echostar in the future.
S
shattered.io
Starlink Mobile: 14 MHz Deal, No Phone Plan Yet [2026]
SpaceX agreed to buy up to 14 MHz of 800 MHz spectrum for Starlink Mobile. No Musk phone plan, price or coverage map exists yet.
shattered.io
S
AT&T, Rakuten tout integration with AST SpaceMobile for D2D
AT&T makes first call handoff to satellite with AST SpaceMobile and prepares for beta service, while Rakuten targets commercial launch in 'near future.'
www.lightreading.com
I was bewildered with all the new DISH TV "Bonus View" channels, so I put together a web page table with all the info I could find. It's at:
https://anythingpeaceful.org/dishtv/DISH_TV_Bonus_View_Channels.html
Here's a partial screenshot of the table, as sorted by Channel Name. (You can click on a column header to sort.)
If you have any corrections or suggestions, please post here.
https://anythingpeaceful.org/dishtv/DISH_TV_Bonus_View_Channels.html
Here's a partial screenshot of the table, as sorted by Channel Name. (You can click on a column header to sort.)
If you have any corrections or suggestions, please post here.
46 Replies
·
6253 views
T
One Bonus View channel added today. And one correction (on my part):
One Removed:
My full list is at: DISH TV "Bonus View" Channels
BTW, not a Bonus View item, but there was a temporary channel 304 Spooktacular added, I imagine just for the Halloween season.
Thanks again to Pat for the many tips.
One Removed:
My full list is at: DISH TV "Bonus View" Channels
BTW, not a Bonus View item, but there was a temporary channel 304 Spooktacular added, I imagine just for the Halloween season.
Thanks again to Pat for the many tips.
T
Three new Bonus View channels today:
My full list is at: DISH TV "Bonus View" Channels
As always, thanks to Pat for the tips.
My full list is at: DISH TV "Bonus View" Channels
As always, thanks to Pat for the tips.
Pub Member / Supporter
Lifetime Supporter
Over the past year I have been tracking the changes on Western Arc. The past 3 months have had a lot of changes that I posted in the other MPEG2 Western Arc shutdown thread. Now that 129 is (basically) out of commission, here is where Western Arc stands. This is just a national channel list, (no local channels) based off what I can see and what others have contributed. Thanks to everyone who has helped me come up with the locations of some of the channels – I would try and list all of you out, but I know I would forget someone! As has been suggested in other parts of the forum, it would be great to collect the spotbeam data for those who could contribute!
A couple of pieces of info:
When I talk about number of channels on a transponder, all my numbers are unique channels – for example, channel 101 and 199 are the same channel mapped to two different numbers, but in terms of space, only takes up 1 channel worth of bandwidth on the transponder.
Finally, I have to give Dish a ton of credit. When it was 110/119/129, Dish had 82 transponders they were using – it took a lot to get it down to 50 transponders and figure out where all the pieces were going to go. What are the things they did to get there? Here are the things I saw:
A couple of pieces of info:
- Out of the 64 transponders between 110/119, there are currently 50 transponders that Dish is licensed to use. 22 are Spotbeams, 28 are ConUS transponders (14 transponders are licensed to DirecTV and Dish doesn't have access to them)
- Those 28 ConUS transponders are divided as follows:
- 10 are dedicated to National HD channels (ESPN, CNN, Disney Channel, etc). Dish is maxing out at 16 HD channels per transponder (note – in an earlier post I said there was one transponder with 17 HD channels, that was an error on my part. When I double checked my listings, one channel changed transponders). Before the transition, there was a maximum of 14 HD channels per transponder.
- 1 transponder is dedicated to adult content
- 2 are a mixture HD PPV Movies/4k channels
- 3 are set aside for HD Sports channels that are only on for live games (NBA League Pass, the PAC 12 alternate channels, some PPV events, etc); 3 SD PPV Sports Channels are there as well.
- 7 are for SD and/or music channels. Dish is maxing out at 26 SD channels per transponder thus far on the SD transponders.
- 5 transponders on 110 I have no channels listed but Dish operates. (they are labeled as ConUS on my chart below) There are other things that could be on those transponders, like RV Distant Networks, internal testing channels, etc, that I can't see. They might be able to be used for additional content, but I am not sure exactly what is on those transponders.
When I talk about number of channels on a transponder, all my numbers are unique channels – for example, channel 101 and 199 are the same channel mapped to two different numbers, but in terms of space, only takes up 1 channel worth of bandwidth on the transponder.
Finally, I have to give Dish a ton of credit. When it was 110/119/129, Dish had 82 transponders they were using – it took a lot to get it down to 50 transponders and figure out where all the pieces were going to go. What are the things they did to get there? Here are the things I saw:
- During this migration from 129, Dish converted 7 ConUS transponders on 119 into Spotbeams – that is how they ended up fitting on all the HD locals that used to be on 129. (for those interested, TP 6, 7, 8, 9, 10, 11, 13 are the ones that used to be ConUS on 119 that are now Spotbeam)
- Removed almost all SD duplicate channels that are offered in HD
- Converted remaining SD channels from MPEG2 to MPEG4
- There are also 2 subtle things that changed from the HD channel perspective
- At the beginning of the transition, Dish decreased the number of PPV Movie channels – prior to this transition the PPV channels HD PPV movies were 502-522; now they are 502-517.
- At the beginning of April when MLB, NBA, and NHL regular seasons were all going on at the same time and this transition began, there were a ton of games "joined in progress" for the HD feeds. That wasn't common since the days before the full time HD RSN's. The reason for that was prior to the transition, Dish had 4 transponders set aside for HD Sports – 2 transponders was the bandwidth set aside from the HD RSN's before Dish dropped the RSN's, then 2 transponders were for alternate channels. Now we are down to 3 transponders for HD sports.
252 Replies
·
66197 views
Lifetime Supporter
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.
Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.
You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.
www.usgs.gov
View: https://youtu.be/Uecu2seh4b4
Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.
View: https://youtu.be/iws3rh5vLAQ
Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.
You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.
Monitoring Data for Kīlauea
For more information on how electronic tiltmeters and GPS receivers help monitor the deformation of Kīlauea volcano, see the HVO Deformation page.
View: https://youtu.be/Uecu2seh4b4
Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.
View: https://youtu.be/iws3rh5vLAQ
122 Replies
·
3610 views
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.
edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:
Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice
Volcano: Kilauea (VNUM #332010)
Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE
Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii
Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.
Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.
Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:
Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice
Volcano: Kilauea (VNUM #332010)
Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE
Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii
Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.
Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.
Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
- All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68741 Replies
·
2684389 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=1AzBMcXCMAc
Direct YouTube Link - Intelligent Machines 895
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=1AzBMcXCMAc
Direct YouTube Link - Intelligent Machines 895
TWIT's Website
TWIT Live Feed
0 Replies
·
4 views
Pub Member / Supporter
Lifetime Supporter
Now first, I'll mention that the area of FL I live in has extremely high humidity and not a lot of wind so things don't dry out very well for extended periods of time.
I'm in the process of tearing down and rebuilding a pergola with a surrounding deck that I built 9 yrs ago. 90% of the deck screws are just sheering off at the head because the screws rusted out. These are the deck screws you buy in the 25 lb box at your lumber yard. Very annoying. So I just ordered some 316L stainless steel screws to use for when I go to rebuild it.
I'm in the process of tearing down and rebuilding a pergola with a surrounding deck that I built 9 yrs ago. 90% of the deck screws are just sheering off at the head because the screws rusted out. These are the deck screws you buy in the 25 lb box at your lumber yard. Very annoying. So I just ordered some 316L stainless steel screws to use for when I go to rebuild it.
3 Replies
·
57 views
Pub Member / Supporter
1 Replies
·
14 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/shorts/dMHcPrYfH8E
Direct YouTube Link - Apple Unveils New Touchscreen MacBook Pro
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/shorts/dMHcPrYfH8E
Direct YouTube Link - Apple Unveils New Touchscreen MacBook Pro
TWIT's Website
TWIT Live Feed
0 Replies
·
9 views
Staff member
HERE TO HELP YOU!
Post any of the deals you find here.
Right now HBO Max has some deals if you pay for the year. $165 for the top plan again
Right now HBO Max has some deals if you pay for the year. $165 for the top plan again
30 Replies
·
1112 views
