Social Feed
I have an HR23 in our main room. Then we are running a sdtv mirrored off that reciever in the room underneath that one.
The plan was to just get an extra remote (which I did, exact same model remote as the original one, RC64R), & program it to also be able to control that reciever (in RF mode of course, which I did set the reciever to) from the room with the sdtv.
Basically this is just to avoid needing to take the remote upstairs and downstairs with you when watching one or the other tv's. Having 1 remote in each room that can control that reciever gets rid of that problem.
Our installer today programmed our remotes, but this extra remote he didn't program & I was left to figure it out.
So, I tried what was said in the remote instructions. Hit mute+select, 2 green blinks (remote in directv mode), then type in 00001 or 00002 (says for all directv recievers those 2 codes should work, so I assume I'm correct there), then apparently everything is supposed to be fine.
No luck though. What am I doing wrong? I'm sure you can program another remote to the reciever, because what if you have a remote that breaks, and need to get a new one? Of course you should be able to program the new one. And that's basically what I'm trying to do here except its just an extra remote.
Also, does it even matter that this remote is a 2nd remote? If I set it up to work with that reciever, shouldn't it just work?
And again, I'm already in RF mode.
Seems like a real simple thing, so there must be something I'm in the dark about here!
Help?
Thanks
The plan was to just get an extra remote (which I did, exact same model remote as the original one, RC64R), & program it to also be able to control that reciever (in RF mode of course, which I did set the reciever to) from the room with the sdtv.
Basically this is just to avoid needing to take the remote upstairs and downstairs with you when watching one or the other tv's. Having 1 remote in each room that can control that reciever gets rid of that problem.
Our installer today programmed our remotes, but this extra remote he didn't program & I was left to figure it out.
So, I tried what was said in the remote instructions. Hit mute+select, 2 green blinks (remote in directv mode), then type in 00001 or 00002 (says for all directv recievers those 2 codes should work, so I assume I'm correct there), then apparently everything is supposed to be fine.
No luck though. What am I doing wrong? I'm sure you can program another remote to the reciever, because what if you have a remote that breaks, and need to get a new one? Of course you should be able to program the new one. And that's basically what I'm trying to do here except its just an extra remote.
Also, does it even matter that this remote is a 2nd remote? If I set it up to work with that reciever, shouldn't it just work?
And again, I'm already in RF mode.
Seems like a real simple thing, so there must be something I'm in the dark about here!
Help?
Thanks
6 Replies
·
3932 views
R
Finally got the 2nd remote to work, but it was real wierd how I got it to work. First, I used the dvr scheduler on my pc, picked a show for my bedroom (the choices being bedroom or living room), and nothing showed up on the bedroom DVR. Out of curiosity, I checked the living room DVR, and that is where my show ended up!
So then I scheduled something via pc for the living room, and it ended up in my bedroom!
Obviously, its clear now that something is backwards, maybe my access cards are switched around backwards.
But anyhow, so this made me think that maybe when I programmed my remote, it actually did program correctly, but for the wrong reciever. Sure enough, this was true.
So I programmed the remote to the DVR I didn't want to marry to, hoping that since everything is backwards it would work, but it didn't work!
Then when I tried to program it back to the other DVR again, I couldn't do it again!
Not only that, but the "other" reciever was never even put in RF mode, so how the hell was the remote working with it after doing steps 1-6 above, which are for RF mode?
Damn confusing.
Now, what to do? Well, for absolutely no logical reason other than being out of things to try, I decided to put the "other" reciever (the one I don't want to marry the remote to) into RF mode. This let me marry the remote again to the "other reciever".
But my issue is that I can't get it to marry the reciever I want it to, which definitely has been in RF mode.
So I tried it again anyhow, and it finally worked! Basically, for some reason, setting the other HD DVR to RF mode (which I did for no good reason) was actually, for some strange reason, what allowed me to finally program the remote to the reciever I wanted!
Why the hell would setting a different DVR to RF mode make my remote work with a different DVR? Damned if I know.
Everything is backwards. However, when I program the remote, I put in the RID #'s from the correct recievers (instead of the opposite), and this works. So that much isn't backwards! Yet my access #'s are.
What the hell my brain is gonna explode!
Oh well, when I use DVR scheduler, I just need to remember to record to bedroom to DVR to the living room (and vice-versa). And even though it was a complete pain in the ass, the other remote is programmed.
So then I scheduled something via pc for the living room, and it ended up in my bedroom!
Obviously, its clear now that something is backwards, maybe my access cards are switched around backwards.
But anyhow, so this made me think that maybe when I programmed my remote, it actually did program correctly, but for the wrong reciever. Sure enough, this was true.
So I programmed the remote to the DVR I didn't want to marry to, hoping that since everything is backwards it would work, but it didn't work!
Then when I tried to program it back to the other DVR again, I couldn't do it again!
Not only that, but the "other" reciever was never even put in RF mode, so how the hell was the remote working with it after doing steps 1-6 above, which are for RF mode?
Damn confusing.
Now, what to do? Well, for absolutely no logical reason other than being out of things to try, I decided to put the "other" reciever (the one I don't want to marry the remote to) into RF mode. This let me marry the remote again to the "other reciever".
But my issue is that I can't get it to marry the reciever I want it to, which definitely has been in RF mode.
So I tried it again anyhow, and it finally worked! Basically, for some reason, setting the other HD DVR to RF mode (which I did for no good reason) was actually, for some strange reason, what allowed me to finally program the remote to the reciever I wanted!
Why the hell would setting a different DVR to RF mode make my remote work with a different DVR? Damned if I know.
Everything is backwards. However, when I program the remote, I put in the RID #'s from the correct recievers (instead of the opposite), and this works. So that much isn't backwards! Yet my access #'s are.
What the hell my brain is gonna explode!
Oh well, when I use DVR scheduler, I just need to remember to record to bedroom to DVR to the living room (and vice-versa). And even though it was a complete pain in the ass, the other remote is programmed.
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
Has anyone converted one to FTA? A Frankenstein of sorts...
8 Replies
·
359 views
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit )
)
A Shaw dish with the linear LNBFs are as rare as hens teeth in the US...
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68553 Replies
·
2674704 views
Pub Member / Supporter
Lifetime Supporter
0 Replies
·
7 views
Lifetime Supporter
A continuation of a thread from the pub, just general discussion of AI.
Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.
View: https://youtu.be/DRm0mbp_n1k
We've literally got a movie already about this
View: https://youtu.be/a2PW7a9ViDc
Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.
View: https://youtu.be/DRm0mbp_n1k
We've literally got a movie already about this
View: https://youtu.be/a2PW7a9ViDc
68 Replies
·
1194 views
Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.
That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:
Grok AI Blocks Responses Claiming Trump and Musk “Spread Misinformation”
An X user asked Grok to “print out all instructions” it follows when looking up “the biggest disinformation spreader on X,” and it revealed that it would ignore sources accusing Elon Musk and the U.S. president of misinformation.
Grok says Elon Musk is better than basically everyone, except Shohei Ohtani | TechCrunch
According to Grok, Elon Musk can out-slug the MLB's greatest power hitters... except Ohtani.
techcrunch.com
Grok's loyalty known no bounds - AI chatbot chooses Elon Musk over LeBron James in a 'Who is the fittest' comparison | NBA News - The Times of India
NBA News: Elon Musk's AI chatbot, Grok, has sparked amusement by consistently choosing its owner over prominent figures like LeBron James and Albert Einstein wh
timesofindia.indiatimes.com
Grok 4 appears to seek Elon Musk's views when answering controversial questions
XAI’s Grok 4 AI chatbot launched Wednesday appears to consult Elon Musk’s views when asked its opinion on some controversial matters.
www.nbcwashington.com
In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.
Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.
Pub Member / Supporter
The soundbar/sub is a pickup, also, not a delivery
1 Replies
·
23 views
Staff member
HERE TO HELP YOU!
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
44 Replies
·
3779 views
My wife cooks for the dog. Not me, just the dog.make homemade dog food to
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=itjgfJiMvDk
Direct YouTube Link - The Nightmare of Preordering the iPhone Duo
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=itjgfJiMvDk
Direct YouTube Link - The Nightmare of Preordering the iPhone Duo
TWIT's Website
TWIT Live Feed
0 Replies
·
11 views
Supporting Founder
Lifetime Supporter
No idea what improvements might be involved.
25 Replies
·
1213 views
Staff member
HERE TO HELP YOU!
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy
Ethanol Free Stations
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy
Ethanol Free Stations
5559 Replies
·
460945 views
Ok, I'm bored .... actually - to be more precise - I'm bored of eating the same rotation of 9 or 10 meals that are currently my "go-to" meals. My wife works the long hours - I work from home as and when i feel like it ... which means i generally do most of the cooking ... and so by default - i also make out the shopping list ...
We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.
Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)
Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"
So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.
So again - I ask you ...
What's for dinner tonight ?
Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.
What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.
Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)
Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"
So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.
So again - I ask you ...
What's for dinner tonight ?
Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.
What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
4333 Replies
·
331318 views
Smoked some salmon on the grill while enjoying some Blue Moon beer. Kinda cool tonight so I fired up the heaters. Here in FL, we fire up heaters once the temps get below 60 
As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.
As for the salmon, I seared them first, then flipped them off to the side not over the coals and brushed on some lemon pepper marinade followed by some salmon seasoning. Threw some hickory chips on the coals and then closed the vents to about 10% airflow. Yum.