Social Feed

airwar said:

It appears that the SW44 is working. I ran the 61.5 satellite to the SW44 rather into the DPP Twin.

I did a check switch on my 501 and it worked perfectly the first time, although, this worked even in my previous configuration.

The 721, however, was still a pain in my a$$. I hooked it up and ran the check switch. It found the 61.5, but it had X's in the 110 & 119 boxes. I went to program guide was able to get some of the channels, not all of them.

So I reset the receiver back to factory defaults. I then ran check switch. I still get the red X's in the 110 and 119 boxes, however, I now get all the channels on both tuners using 1 cable....yippee!!!!

Hope this helps someone out there.

Click to expand...

SimpleSimon said:

Huh WHAT?

You're using an old SW44 with a DPPlus Twin? NO WAY!

All I can think of is you've typo'd the heck out of your post.

Maybe you can tell us EXACTLY what you've got hooked to what?

Click to expand...

SimpleSimon said:

OK. That's better. Of course, a DPPlus Twin is wasted when used with a DPP44.

Click to expand...