Social Feed

R
Last reply · posted in DISH Network Support Forum
:) The 722K and the 222K come from the factory with the TV1 set to Off in the modulator Setup. TV2 Defaults to channel 60 air mode. Assuming that TV1 (the actual television set) is on cable mode and you don't have any way of changing it to air mode. Is there a trick to force tv1 on the modulator set up to go to air 62 or cable 75. How do the Dishnetwork installers over come this obstacle? Many customers that have eastern arc installations have these MPEG 4 receivers because they can't have MPEG 2 with Eastern Arc installs but still have old TV sets with coaxial cable connections only. :confused:
9 Replies · 7334 views
pabeader
some folks use cheap lcd tv from walmart to setup with.
T
Hi folks! My name is Anthony Thomas with DISH Network Customer Service. Just reading the post and I actually have some information regarding modulated settings between TV1 and TV2. Modulated settings for TV1 are, by default, set to off. You will need to access the "Modulator Setup" page as described by hawker152. Before making any changes, you will want to note settings for TV2. There is a secret here! Channel 60 air is the same (or close) as channel 116 in STD Cable on a tv. Channel 73 for STD Cable is the same (or close) as channel 21 (or some tv's chan 22) AIR mode. Secondly, the modulator will not allow you to put the channels any closer then two channel number difference. So the original question was if one tv is set to air, and the other is set to cable, and there is no way to change it, how do you get it to work? So lets say tv one is set to air, and tv2 is cable. If you setup for tv1 air the channels will read 62 air tv1 and 60 air tv2 by default. TV1 goes to the official modulated channel of 62, and tv2 will need to go to channel 116 (which is the cable equivalent to 60 air). Lets say the reverse is true, tv1 is cable and tv2 is air. modulate to cable (defaults will be 75 cable tv1 and 73 cable tv2). You can work the same magic in reverse. TV1 goes to 75 of course, and tv2 will actually be found on channel 21 in most cases. There are some limits to this, but 99% of the time this works. Hope this helps!
vash1090
Hi folks! My name is Anthony Thomas with DISH Network Customer Service. Just reading the post and I actually have some information regarding modulated settings between TV1 and TV2. Modulated settings for TV1 are, by default, set to off. You will need to access the "Modulator Setup" page as described by hawker152. Before making any changes, you will want to note settings for TV2. There is a secret here! Channel 60 air is the same (or close) as channel 116 in STD Cable on a tv. Channel 73 for STD Cable is the same (or close) as channel 21 (or some tv's chan 22) AIR mode. Secondly, the modulator will not allow you to put the channels any closer then two channel number difference. So the original question was if one tv is set to air, and the other is set to cable, and there is no way to change it, how do you get it to work? So lets say tv one is set to air, and tv2 is cable. If you setup for tv1 air the channels will read 62 air tv1 and 60 air tv2 by default. TV1 goes to the official modulated channel of 62, and tv2 will need to go to channel 116 (which is the cable equivalent to 60 air). Lets say the reverse is true, tv1 is cable and tv2 is air. modulate to cable (defaults will be 75 cable tv1 and 73 cable tv2). You can work the same magic in reverse. TV1 goes to 75 of course, and tv2 will actually be found on channel 21 in most cases. There are some limits to this, but 99% of the time this works. Hope this helps!

You're from Dish? Then you would know that it is not dish policy to set up a TV on an air/cable crossover channel such as 116 or 22.
The correct answer to the original question would be to set both tvs to either cable or air. I normally set up the splitter righrt behind the receiver and then use TV1 to show TV2 to set up the receiver. Not mandatory to do it this way, but once the receiver activates it will undo any modulation you have done already and you have to use TV2 anyways to change it back. Once you have the channels set and the TVs programmed to those channels you're good to go. If you were saying earlier that the problem is that you can't get both on air/cable you have a different problem, but I can address that also if you need.
T
To be sure, it is not a typical install. I was simply replying to the initial statement where Rubitony mentioned that he could not change that setting on the TV itself from air to cable or vice versa. In that instance, this would be a work around as the box itself cannot modulate TV1 to cable and TV2 to air, or vice versa, hence the need to use the crossover channel. Did not mean to step on any toes, just giving an official work around that I have used previously, as this question was a frequent one "on the phones."
B
I use a cheap rf modulator when I run into two tv's with no inputs.If tv one is stuck in cable mode hook the receiver to home distribution port and change the modulation using tv 2 go to the modulator setup page and press system info on the receiver then you can set up modulation with tv 2 remote
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 5 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68776 Replies · 2687717 views
  • Like
Reactions: c-spand
M
Night Fever - Bee Gees
  • Like
Reactions: RaiderPower
long_time_Dish
Night By Night - Steely Dan
RaiderPower
Day By Day - Godspell
  • Like
Reactions: long_time_Dish
long_time_Dish
Derk Day - Steve Walsh
H
Waiting On A Sunny DAY-Bruce Springsteen
ewindowman
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
461 Replies · 16148 views
Bruce
tanman
For your viewing pleasure...
comfortably_numb
For your viewing pleasure...

That's ok, I'm sure Verizon will be happy to take them.
  • Like
Reactions: charlesrshell
dishstaller
That's ok, I'm sure Verizon will be happy to take them.
That's ALL Verizon needs.....more congested towers :mad:
comfortably_numb
That's ALL Verizon needs.....more congested towers :mad:

They don't care... they're milkin' the cow. Buddying up with Elon to provide him an MVNO network will make their investors and shareholders salivate. All of their recent marketing efforts have failed, so this move makes a lot of sense.
fmj77
Mr. Morris is no journalist. That article reads like a political hit job.
  • Like
Reactions: charlesrshell
NYDutch
That's ok, I'm sure Verizon will be happy to take them.
Yep, they could stick it in with thier other dozen or so MVNO's, including the five they own.
b4pjoe
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
18 Replies · 405 views
harshness
Given that Tubi is one of the hottest FAST services out there, I don't expect it to go anywhere. Building up intolerance for ads takes a while, and as long as the advertisers are willing to foot the bill, why not?
dishstaller
Building up intolerance for ads takes a while, and as long as the advertisers are willing to foot the bill, why not?
That is what I have to explain to customers all the time. They want it free with no ads :facepalm
  • Like
Reactions: navychop
navychop
Hmmm. Not watching much Prime, but it would be on our Apple TV STB.

You know of any drawbacks using Ultra and Prime?
osu1991
Hmmm. Not watching much Prime, but it would be on our Apple TV STB.

You know of any drawbacks using Ultra and Prime?
Prime seems to have a problem passing the DV/HDR metadata to Roku and Apple devices, but no problem with their Fire devices.
  • Like
Reactions: navychop
Juan
That is what I have to explain to customers all the time. They want it free with no ads :facepalm
The ads are boring and repetitive...same ad over and over...bring back 1970s ads..might not be as big an issue
HipKat
Shouldn't this thread be in the IPTV forum?
  • Like
Reactions: Foxbat
dishstaller
The ads are boring and repetitive...same ad over and over...bring back 1970s ads..might not be as big an issue
Had a customer come in a couple weeks ago to pay her internet bill. She let me know in no uncertain terms that she did NOT appreciate me running the same ads over and over. I looked at her and waited for her to laugh and say she was just joking.......still waiting for that laugh.
osu1991
Shouldn't this thread be in the IPTV forum?
There is one there too. I would think either is justifiable as they make both the device and provide a streaming program service.

Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
185 Replies · 3493 views
  • Haha
Reactions: Mike0616
R
A lot of upsets yesterday, but my LSU Tigers won.
Y
Parity is growing in College Football. Making it even harder to tell who is better than each other.
rvvaquero
Parity is growing in College Football. Making it even harder to tell who is better than each other.
I agree to a point. The transfer policy is creating parity, but only for the top 20-25 teams. The other 110+ teams in the FBS are just breeding grounds for the bigger schools which have more money and more recruiting appeal.

If a smaller school recruits, trains, and matures a quality player, they can't keep them past their sophomore year because the bigger schools snatch them up. Example: LSU didn't cultivate Sam Leavitt, they just harvested him from other schools. LSU is a top contender, in large part because of Leavitt. Michigan State and Arizona State.................are not. If either of those schools had been able to retain his services, who knows where they would be now.
T
A lot of upsets yesterday, but my LSU Tigers won.
Coach says afternoon game result of SEC "conspiracy". The rivalry game vs. Ala. will kick off in the afternoon at Baton Rouge rather than at night, which head coach Lane Kiffin says is intentional in order to neutralize fan craziness and noise, which is believed to help lead to wins for squads playing at home. "Obviously the SEC wanted to change this year from how it had been to give LSU less advantage, (considering) how well LSU plays at night and how intimidating it is to play here. So I guess when I look at it that way, I'm not surprised."

But he's come up with an ingenious solution. "Go to bed earlier Fri. night, then start your day earlier. Have breakfast earlier. Start drinking earlier. Whatever your routine is, just move it up."

Meantime ads have been running for a "Protect College Sports Act" moving through Congress.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Comcast is the first to report, with a massive 274,000 loss in video subscribers.

In the 3Q of 2016, Comcast had 21.42 million video subscribers and was the #1 provider, now at 10.39 million and is the #3 Provider, YTTV is #2 ( who also surpassed DirecTV-8 Million and Dish-under 5 Million), Charter/Spectrum is #1.

23 Replies · 975 views
  • Like
Reactions: Howard Simmons
Tom Speer
Optimum, which bought up our previous cable company, Suddenlink (originally COX), replac ed all of their coax disdribution with Fiber several years ago. They ran new fiber links to the house, but installed RFOG (RF over glass) devices on the outside of the house, which makes the house coax system look like a cable system. They used DOCSIS modems and of course we had the same assymetric bandwidth of cable internet. When I called them a couple years ago, and said I had installed a connection to the local Fiber provideer, MetroNet, They panicked and offered me the 300 MBit "Fiber powered" cable service for $20 per month. They were bleeding customers. I cancelled my Metronet and went with the $20 deal for a year, even though I didn't like the old cable technology.

Then T-moble Fiber struck a deal with Metronet Fiber where T-mobile would take over the marketing, billing and customer relations for residential Customers. They offered a "Founders Deal" for 2 Gigabit service, symmetric speeds, for $70 per month for new customers. That included all taxes and fees and was guaranteed for 10 years. I couldn't resist. That deal is no longer offered, but I am set for 9 more years.

Now the successor to the old local telephone company, Brightspeed has also installed a modern Fiber system in the neighborhood, but won't be getting my business. But their Fiber technology is also superior to Optimums cable based system.

With Fiber competition, the cable companies are eventually doomed.
  • Like
Reactions: MikeD-C05
Foxbat
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
  • Sad
  • Like
Reactions: MikeD-C05 and Bobby
S
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
  • Like
Reactions: Foxbat
ncted
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
"Business Intelligence" is more of an oxymoron than Military Intelligence.
TRG
TRG
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
I have gigabit fiber in an underground box on my property. But it's not lit up yet so I'm stuck with copper too. For now anyway.
  • Like
Reactions: Bobby and Foxbat
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
1 Replies · 104 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell