Social Feed

S
Last reply · posted in DISH Network Support Forum
1000.2 Sudden Death

Happy new year to everyone! It wouldn't be a new year without a new problem. :) My VIP 722 started popping up with "partial signal loss" messages on tuner #2 yesterday afternoon. I was on the same channel as tuner #1, but #1 was working fine.

After a bit, the channel came back on tuner #2, but was noisy and obviously suffering from signal loss. Some time later, tuner #1 stated showing the same signal loss message. I did a reset on the receiver and noticed that I can only see the 110 West sat regardless of which sat is selected in setup.

This all started after a sudden temperature drop. It seems that as the temp dropped, the problem got worse. Today, I still have only a few channels available and can only see 110. Selecting either 119 or 129 only results in "Wrong Sat - Echostar 110 West" being displayed, but the signal level on 110 is good.

Does anyone have any ideas what is causing this? I know there were some cold weather issues with certain Winegard LNBFs, but I though those were only on the Direct systems. I replaced my old Dish 500 in April, so this 1000.2 has not yet seen a cold Colorado winter. I have had zero issues with it until today.

I don't know if those LNBFs have died, but it seems more like the internal switch may not be working. Could it have frozen up? I only have the one VIP722 connected to a single coax RG-6 run that is about 20 feet long. My Dish is down low so I thought about puling the LNB unit and bringing it inside to warm up for a bit. Am I wasting my time on this? Should I be looking at something else?

We had some snow (just a couple of inches) and no wind. We do have some cloud cover, but not enough to totally block 2 sats. The bitter cold is what I suspect.

Thanks in advance for any tips you can give me!
5 Replies · 1636 views
S
Update: Brought the LNB in for a bit, put it back and all now works perfectly. I don't know if it was the warmth or just the act of removing power for a while that fixed it. Either way, it looks like I need to replace my LNBF unit. :( Does anyone know of these having cold weather issues? Is there a better aftermarket LNBF pack for this antenna?
TheKrell
If you pull the LNB assembly, you could easily select a different output port...
S
I put it back using the same configuration (connected to port 1), so it's not the port. If it fails again, and I'm sure it will, I'll switch to port 2 or 3. I don't know if that's going to make any difference. Odd that it didn't do this until the temp got low.
B
It's a known 722 problem,I have one a week that fails with that same problem.
S
This has nothing to do with the receiver. A 301 on port 2 exhibited the same problem. Problem only resolved after warming the LNB. It cut out again a little while ago... connected 722 coax to port 2 and no go. Connected 722 back to port one and a 301 to port 2. 301 reports switch error. Removed LNB again and brought in to warm up. Reconnected 722 back to port 1 - works. Connect 722 to port 2 - works. Connected 722 to port 1 and 301 to port 2 - both work. This is absolutely temperature related and it seems that this LNB has some type of problem.

I would still like to know what to replace it with. A quick web search shows me just the OEM replacement, which would be fine as long as I know these don't have temperature problems. I'm sure there are many others using these same LNBs that are in cold climates. If some could chime in, that would be great.
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
524 Replies · 17827 views
  • Like
Reactions: charlesrshell
Foxbat
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.
  • Like
Reactions: charlesrshell
Scott Greczkowski
I have been optimizing the site the past few days... and got us here now. :) We are rocking now!

Screenshot 2026-10-15 144737.webp
Foxbat
Yeah. It's probably something going on with the MacBook as my iPhone has been pretty snappy.
I rebooted my MacBook Air and it's zipping right along. Sorry, but it was taking over 20 seconds to load pages, with the pulsing blue bars so it was munching on something.
Scott Greczkowski
Remember folks... just like DNS... its always Foxbat. :D
  • Haha
Reactions: FTA4PA and Foxbat
Foxbat
Remember folks... just like DNS... its always Foxbat. :D
WTF… …What the Foxbat!😱
  • Haha
Reactions: FTA4PA
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
4 Replies · 58 views
Foxbat
Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…
dishstaller
Well, I helped him set up a gmail acct....I actually wanted to see what the new process is for setting up a gmail acct since it had been years since I set mine up. Anyway, I showed him how to forward the emails he wanted to keep over.
navychop
If Earth had shorter days,

Wouldn't we then die of old age sooner?

🙄
Foxbat
Wouldn't we then die of old age sooner?

🙄
Still the same number of years, just more Sunsets…😉
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

22 Replies · 174 views
Jimbo
Back on the Goliath Roller Coaster ... I'm interested to find more details as well ...
Like where on the track did this happen (somewhere I read that it was on the climb up the top), which is impossible ...

They really need to take that ride and add at the very least, seatbelts ...

The Park is opening back up on Friday, the ride will Not be opening ... personally, I would keep it closed until different type of restraints can be designed and installed (over the winter).

I find it hard to believe that this ride is even allowed to be running with the restraints that exist at the moment, there are other rides that use the same type and they have been shut down across the country.

You got to believe that every ride has at least 2 types of restraint systems in place.

I wonder what and when we will hear from the Manufacturer ... and whatever governing bodies control these ...

Just think, this is a Major Amusement Park .... I would not have any problem getting on the Roller Coasters I have rode ...

Imagine what these County Fairs and others like them, I would not be caught Dead on one of them ... they get put up and tore down every other week, where is the safety for those rides ... No Thank You.
  • Like
Reactions: dishstaller
Jimbo
navychop
I would not be caught Dead on one of them

Yet IF you were on one, you might be caught dead.
dishstaller
Had no idea there were that many redundancies built into those restraints.
Jimbo
Had no idea there were that many redundancies built into those restraints.
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system :)
I'm glad to see ...
dishstaller
with a Seat belt as last resort.
According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.
H
Last reply · posted in FTA Receiver / Equipment Support
I just received 6 receiver 2 port mini Multiswitch and it work great, no external power need it, and you can connect 6 receiver instead of 4 on most Mini Multiswitches... If anyone is interested in where they can get one PM me....
IMG_1786.webp
2 Replies · 44 views
Titanium
Have you tested using external power? Over the years, have found unpowered polarity switching to be unreliable. Especially problematic when used with DiSEqC motors or switch stacking.
H
No I have not. I just got it the other day and it is connected to six receivers working just fine. What I do is non power mini multi-switches work best with LNBF's and with LNB's
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 7 views
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2129 Replies · 214621 views
TheRatPatrol
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
  • Wow
Reactions: Howard Simmons
Jimbo
Wait, Tony is the director now? Apologies, I stopped watching a while ago.
Was Gibbs still there when you quit watching ?
If so, A Lot has happened ....

It's been pretty good all along , once you get use to Gibbs being gone.
  • Like
Reactions: MikeD-C05
Jimbo

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Tony as the director.🙄
Jimbo
Tony as the director.🙄
Would you rather have LaRoche ???
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 9 views
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
I bought the fixed color version of these bulbs for my store several years ago...work great and no more replacing ballast. Finally had one go out and when I went back to Amazon I saw that now they come in selectable versions so no more guess work as to what color light would do best in a certain area. They are now double OR single ended...used to be strictly one way or the other. If any of you are looking at replacing the old style 4 or 8 ft bulbs, you might want to give these a try. The 8 footers are BRIGHT. I put 5 in my shooting/target shed and you can get a decent tan if you are in there long enough.

1 Replies · 27 views
Foxbat
When we re-lamped my in-Laws' house for sale last year, we were able to get all the Edison bulbs and a few fixtures with switch-selectable Color Temperature. We tried a few and settled on 3000°K as the best fit for the house. Matching the lighting in all the rooms made for an inviting experience. The Shop was the only place that we went with 4000°K for the LED 4' fixtures.

The house was sold within a month of going on the market, so we must have done something right.

The other advantage is if the new owners decide that they prefer a warmer light, they can unscrew the bulbs (I think it was close to 70 bulbs) and set them to the 2500K/2700K settings.

I'll have to check these out. Thanks!
  • Like
Reactions: dishstaller