Social Feed

osu1991 said:

I've spent $68,000 in premiums the last 5 years

Click to expand...

dishstaller said:

not cancel it outright but do away with the portion which covers wind damage.

Click to expand...

harshness said:

Other than fire, what other kinds of damage do you guys get down there?

Click to expand...

dishstaller said:

Not much else. Fire is the only thing I really worry about. I honestly didn't know I could remove wind coverage until someone told that they had....dropped their annual rate from $6,500 to $1,800. I'm currently paying $5,160.

Click to expand...

Jimbo said:

Does the Wind portion cover Hurricanes ?

Click to expand...

dishstaller said:

Yes. I covers ANYTHING wind related. If the wind blows down a tree on my roof...that is wind related.
That is why I want to take out a few trees first before I drop it.

I'm not worried about my roof. House was very solidly built and has hurricane straps. I put the metal roof on myself with the help of a friend and I recently replaced all of the outer screws with #12 2 in screws which I also dipped the tip in silicone before driving them in. Any other damage I'll fix myself like I did after Michael gave us a visit in 2018.

Click to expand...

dishdude said:

The other thing you can look at are deductibles. I bumped my homeowners up to $10k and it dropped my premium in half - I'm not filing a claim unless the damage is catastrophic.

Click to expand...

Jimbo said:

So, the Roof will stay, hopefully the rest of the house stays as well ... if the Hurricane decides to take the house and move it down the street, well at least the roof will go with it !

Click to expand...

mheisen said:

Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?

Click to expand...

slow_poke_pete said:

Buy a roku and dump the hopper plus you'll be better off. If you have a smart tv you don't need either one. No hopper plus here and no issues!!!

Click to expand...

jsmit86 said:

If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.

Click to expand...

• • TCP Port 80 – HTTP communication
  • TCP Port 443 – HTTPS secure communication
  • TCP Port 5678 – Neighbor Discovery / Device Sync
  • UDP Port 80 – Alternative streaming/network data
  • UDP Port 443 – Alternative secure media streams
  • UDP Port 5678 – Remote pairing and network discovery

• • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
  Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.
  
  The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.
  
  
  ​

Almighty1 said:

Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:

• • TCP Port 80 – HTTP communication
  • TCP Port 443 – HTTPS secure communication
  • TCP Port 5678 – Neighbor Discovery / Device Sync
  • UDP Port 80 – Alternative streaming/network data
  • UDP Port 443 – Alternative secure media streams
  • UDP Port 5678 – Remote pairing and network discovery

Critical Network & Security Considerations

• • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
  • Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.
    

Click to expand...

jsmit86 said:

This was for port settings for the switch, not the router.

Originally was recommended to use EDGE vs. Infrastructure, but had to change that back to Infrastructure.

Had to leave STP (Spanning tree protocol) ON, but disable BPDU guard, and also had to disable Non-STP loop protection.

The previous settings were flagging normal dish system packets as a data loop, and fully blocked that port on the UniFI Pro Max 16 POE switch.

These were specific to my managed switch, and may not apply to the OP's issue.

Click to expand...

arlo said:

Can't really help with an exact set of suggestions. I can say that if you have a set budget. And $600 these days wont get you much. One thing I can say is check out Dell Refurbished.
I've suggested and even configured, ordered a few for friends who were a bit iffy in deciding what they needed and wanted.
Refurbished doesn't mean that they came back defective and were repaired. Companies and organizations who order quantities of the same computers often cancel or modify their requirements.
Dell builds usually on demand. Their direct refurbished line will be brand new, unused. Perhaps not exactly the "today" specifications of the latest-greatest. And you can get a nice pc for quite a bit less with full warranty.
Just a suggestion.
"I use the laptop to mainly surf the web and keep up with my finances, money and bills. I would like to have at least a 15" screen and having a touchscreen is a plus".

As far as Asus, HP goes. And others you may consider. I'd think $600 (new) would get you a laptop. A quality, long lasting one? Not so sure. Now. If you could get a $1000 lappy for $600. Good deal, don't you think?
Surf the web doesn't need a killer Nvidia graphics chip. Nor a pinnacle, top of the line Intel, AMD processor.
12-16 gigs of memory will get you by just fine.
I'm personally an Asus fan. Brands aside. The one thing is the batteries. We discussed that here someplace else.
I repair these critters. Batteries. Cheap laptops have cheap batteries. Asus suggests that you don't keep the charger plugged in all of the time to make them last. Like you see on phones where 85% vs full charge is suggested to preserve battery life.

Click to expand...

reubenray said:

After checking on new laptops and not liking the prices I checked to see when I replaced the battery in mine. It was about five years ago. I also installed a bigger 1TB SSD drive a few years ago. It already has 12GB of RAM which was more than most new laptops I looked at. I plan on replacing the battery to see what happens. The laptop is a Dell Inspiron 5570. Is there anything else I need to replace?

Click to expand...

Foxbat said:

I'm at a limit for TV sizes at this time. My Father-in-Law crafted a custom entertainment center for our family room and we were restricted from going too big based on the side cabinets and central bridge fitting in the width of the room. It turns out to be where a 55" screen with bezels fits but no 65" bezel-less screen can fit. I think there was a brief period where 58" screens where a thing, but no more.

So, no huge screens for the Foxbat's…

Click to expand...

TRG said:

55" is plenty big.

Click to expand...

dishstaller said:

And to think....I was SO proud of myself when I bought a 27 in TV in the late 80s. Everyone just had a 25 in so I was really in high cotton.

Click to expand...

Jimbo said:

I remember buying my 1st Sony .... a whopping Big 27" CRT XBR .... $1200.

Click to expand...

dfergie said:

Tried to watch the truck race but the stage c**p is why I don't watch NASCAR anymore…

Click to expand...

Yespage said:

Parity is growing in College Football. Making it even harder to tell who is better than each other.

Click to expand...