Social Feed

C
Last reply · posted in DISH Network Support Forum
I am in Columbia, SC and we are about a month away from college football. We have decided to bring satellite to our tailgate this year, and I just have a few questions. We have DISH network at the office, and plan on bringing one of those receivers on the weekends. I just need to know what kind of extra dish to buy. Can I buy a used dish, and does it have to be a certain kind? I know there are a few used DISH network dishes on Craigslist and ebay for sale, etc. and I just have no clue where to begin. The DISH outside of our office says Turbo HD and the receiver I will be using is the vIP211K HDTV receiver. Thank you in advance for your help.
33 Replies · 4439 views
lakebum431
I have used a 1000.2 tailgating for a few years and haven't had any trouble at all. I used to get locals from Atlanta but have since moved and now my locals are only on Eastern Arc. So I need to update my tailgate dish. What are the options to get Eastern Arc? I don't actually need 77 (only 61.5 and 72). At home I have a 1000.4 but haven't kept up with all the new dish options so I'm not sure what dishes actually work. I'm not concerned about being able to aim (I know I can aim whatever dish I need to), I'm only concerned about what works. Is the 1000.4 the only dish available for eastern arc?
L
I have used a 1000.2 tailgating for a few years and haven't had any trouble at all. I used to get locals from Atlanta but have since moved and now my locals are only on Eastern Arc. So I need to update my tailgate dish. What are the options to get Eastern Arc? I don't actually need 77 (only 61.5 and 72). At home I have a 1000.4 but haven't kept up with all the new dish options so I'm not sure what dishes actually work. I'm not concerned about being able to aim (I know I can aim whatever dish I need to), I'm only concerned about what works. Is the 1000.4 the only dish available for eastern arc?

You should be able to use a D500 with a twin for just 61.5 and 72. Others have done it.
lakebum431
It doesn't seem like the spread between the LNBs would be right (9 degrees vs 11.2 degrees)...
Scherrman
Unless you really can't afford much and have the room to haul a dish assembly and tripod I would go with the Tailgater. I use to bring a Dish 1000.2 and a Pole to mount it on. It was a pain every morning trying to set it up. Some days it would take 15 minutes and others it would take an hour or more. Once we stopped taking a bus and just drove a truck we didn't have enough room for it. It wasn't worth the hassle especially with everyone having tickets to the game.

Now with the tailgater, it's affordable and extremely easy to set up. It won't take up much space either. All I need to get now is a small and quiet generator. I can't wait for football season.
delta_charlie
I am in Columbia, SC and we are about a month away from college football. We have decided to bring satellite to our tailgate this year, and I just have a few questions. We have DISH network at the office, and plan on bringing one of those receivers on the weekends. I just need to know what kind of extra dish to buy. Can I buy a used dish, and does it have to be a certain kind? I know there are a few used DISH network dishes on Craigslist and ebay for sale, etc. and I just have no clue where to begin. The DISH outside of our office says Turbo HD and the receiver I will be using is the vIP211K HDTV receiver. Thank you in advance for your help.

Hi, you could use other dishes if you where to run a check switch each time you switched the receiver from one dish to another. Not really much trouble but it does take a little time to run. You may be able to get by with something as simple as a Dish 500 with the single LNB (common and used as a wing dish) provided all the channels you will want to watch are on one satellite. Do some research then hit the info button twice on the receiver and see what satellite is being used. If everything you want is on the same satellite you would be good to go. Another cheap options might be the Dish 500 with the dual LNB and set it up for 110, 119 or 119,129 Hope this helps, DC
delta_charlie
It doesn't seem like the spread between the LNBs would be right (9 degrees vs 11.2 degrees)...

Hi, regarding using a Dish 500 with DPPlus dual LNB you are correct, the spread is not correct for use with 61.5,72.7 but it still works because it is close enough. There will be some signal loss and you would have to split the difference but it will work at least in good weather. BTW - you don't need no stinking tripod. Just get a piece of plywood and mount the dish and some blind nuts with eye bolts for levelling. The micro azimuth on the dish in the picture was for FTA experiments and is not needed with the stronger Dish satellites. Later, DC
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68685 Replies · 2681576 views
  • Like
Reactions: c-spand
sdfntx
Safe In My Garden - The Mamas & The Papas
long_time_Dish
Mary Shut The Garden Door - Donald Fagen
  • Like
Reactions: Bobby
dishstaller
The Wind Cries Mary - Jimi Hendrix
long_time_Dish
Lonely Wind - Kansas
dishstaller
Lonely is the Night - Billy Squier
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
:mad::mad::mad::mad:

Pissed off at the crappy healthcare costs

My health Insurance renewal for 2027 just came in. Going from $827 a month to $1,187 a month. Deductible going up a $1k to $9,350. Max out of pocket also going up $1k to $11,000. Doctor co-pay of $40. Urgent Care co-pay $50. ER 50% coinsurance after deductible. That's all in network. Out of network is double, should it be needed.

Have to think about this. I'm really tempted to just go without now. I only go to the doctor once or twice a year. I pay out of pocket for Tirzepitide and can do without the Rosuvastatin (crestor) now. Really tired of spending over $10k a year and getting nothing out of it.

After years with Blue Cross I switched last year to Ambetter as my Blue Cross premium was going from $1200 to $1800 for a Silver plan and the Bronze plan was still going to be $1300 at BCBS. Ambetter was $827 for the same coverage with a Bronze plan. Didn't think it would jump this much so soon.

I'm guessing a Silver plan is probably over $2,000 a month for 2027.
21 Replies · 271 views
  • Sad
Reactions: AZ.
vazhog
that cut is only for illegals to get off the rolls and I was being sarcastic before -
harshness
that cut is only for illegals to get off the rolls and I was being sarcastic before -
That's not who it is for. The cut is for those who won't work (though you typically had to prove that you couldn't work to get it in the first place).
  • Like
Reactions: AZ. and osu1991
Foxbat
Why isn't this Political thread over in the Pit? This is why there is a Pit, and why I rarely use the Chit Chat Club. But someone said, "The Pub is Elitist since you have to pay dues to enter, so please post in the Chit Chat forum so more guests can read and participate."
osu1991
Why isn't this Political thread over in the Pit? This is why there is a Pit, and why I rarely use the Chit Chat Club. But someone said, "The Pub is Elitist since you have to pay dues to enter, so please post in the Chit Chat forum so more guests can read and participate."
I didn't start it as a political statement and have no interest in the political BS of this country. Everyone wants to make everything political nowadays. This was just my rant over the outrageous increase in my premiums and how unaffordable healthcare is becoming to the average person here.

admin can close or delete it if they don't want here.
  • Like
Reactions: AZ.
Bobby
Why isn't this Political thread over in the Pit? This is why there is a Pit, and why I rarely use the Chit Chat Club. But someone said, "The Pub is Elitist since you have to pay dues to enter, so please post in the Chit Chat forum so more guests can read and participate."
There are no dues to be paid to be in the Pit. You just have to use the password which is clearly shown when you try to log in to it.
  • Like
Reactions: dishstaller
dishstaller
Everyone wants to make everything political nowadays.

Yes.....they do. Which is why I am very careful when at a customer's house these days....you NEVER know what is going to set someone off. Polite dialog is a thing of the past.....which is why I like my dog so much :)
  • Like
Reactions: osu1991
dishdude
That's not who it is for. The cut is for those who won't work (though you typically had to prove that you couldn't work to get it in the first place).

Which makes zero sense. If they are healthy and able to work but won't, they aren't using any health resources up.
  • Like
Reactions: Bobby and NYDutch
navychop
Until a runaway pickle truck hits them.
dishdude
Until a runaway pickle truck hits them.

I'm sure Vlasic has good insurance!
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SiriusXM Satellite Radio
Some of the channels start next week.

4 Replies · 186 views
comfortably_numb
My favorite is probably Holiday Pops.
TRG
TRG
It's not even Halloween yet.
  • Haha
Reactions: Howard Simmons
Scott Greczkowski
I like the Jimmy Fallon channel. This will be its third year. I like that it's all fresh each year. Also fun when he pops on live from time to time.
Don in CT
My favorite is probably Holiday Pops.
So it's a drunk father telling his in-laws to leave.
  • Haha
Reactions: comfortably_numb
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
I figured some of the guys would be looking here for an answer. You'll need to use this link

I'll mention what happened over there. I don't want to cause Scott any issues or put him in a bad spot.
7 Replies · 260 views
dishstaller
If any of you know some of the guys from the board and you have their contact info, please reach out to them....many failed to update their contact info and some even had starband email addresses.
  • Like
Reactions: charlesrshell
Scott Greczkowski
I figured some of the guys would be looking here for an answer. You'll need to use this link

I'll mention what happened over there. I don't want to cause Scott any issues or put him in a bad spot.
Now I have to go check out what happened now. Lol!
  • Like
Reactions: charlesrshell
Scott Greczkowski
Went and looked, not too bad...

Just let people know the address is satelliteretailer.com as DishRetailer.COM is not working. :)
  • Like
Reactions: charlesrshell
(((Garyd)))
If any of you know some of the guys from the board and you have their contact info, please reach out to them....many failed to update their contact info and some even had starband email addresses.
Your old link triggered my Bitdefender today.
  • Like
Reactions: charlesrshell
(((Garyd)))
Now I have to go check out what happened now. Lol!
I had a direct link to ]Political, thought provoking and debatable but now have to go in the main section or I get a warning on my Bitdefender
  • Like
Reactions: charlesrshell
dishstaller
Now I have to go check out what happened now. Lol!
I sent you a PM Scott. Doesn't really make any sense to me BUT....I've never claimed to be the sharpest knife in the drawer....though I just might be the most persistent. :baby
  • Like
Reactions: charlesrshell
Scott Greczkowski
I sent you a PM Scott. Doesn't really make any sense to me BUT....I've never claimed to be the sharpest knife in the drawer....though I just might be the most persistent. :baby
Its an automated bot. Explained it to you in the PM.
  • Like
Reactions: charlesrshell
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
117 Replies · 1159 views
meStevo

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
harshness
If it weren't for the sky-high electricity prices...

Of course, the real scare with Winter coming is the insane cost of heating oil.
  • Sad
Reactions: Jimbo
osu1991

GM said its next-generation vehicle architecture will provide 40 times more computing power and 30 percent less wiring than before and will expand from the 2028 Cadillac Escalade IQ to its high-volume SUVs, trucks, crossovers, and fourth-generation EVs, which will be powered by lithium manganese-rich (LMR) prismatic batteries

Despite the politicization and perceived consumer pivot away from EVs in America, GM needs to remain globally competitive, so it's doubling down on its fourth generation EVs, with energy-dense, cheaper-to-manufacture LMR batteries, more efficient motors, and state-of-the-art centralized computing architecture. With a stated goal of cutting the traditional four- to five-year concept-to-production time in half, GM is clearly challenging the concept of "China speed," which in the Chinese automotive industry can be as quick as 18 months from design to start of production. In the AI space, GM is smartly collapsing all of its marque-specific apps under the familiar OnStar brand, while providing more features—both on the phone and in the car—than it ever has before.
harshness
Let's tell it like it is. GM's EV efforts are coming from SAIC. The brain trust is almost entirely in China, and GM is hanging off of SAIC's shirt tails.

It is a lot like asserting that the Corvette was designed by Chevrolet when most of it came from the Cadillac CTS-V.
  • Like
Reactions: osu1991
T

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
That's how Ford did it- vertical integration. He even set up a rubber plantation in S. America
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 11 views
T
Last reply · posted in DISH Network Support Forum
I have Dish Hopper and Hopper Plus and also have Alexa Echo. I link the Alex skill to Dish and it asks me to enter the pairing code shown on the TV. I go into Dish Settings and there is no Alexa shown. Not sure what to do.
18 Replies · 881 views
  • Like
Reactions: tanman
navychop
Ungood.
  • Like
Reactions: charlesrshell
R
What is the purpose of connecting Alexa and the H3?
  • Like
Reactions: charlesrshell
navychop
Tell Alexa verbally what to do.
snissen
What is the purpose of connecting Alexa and the H3?
I stand up from my chair with my glass in one hand and my plate in the other, when a story I really want to hear comes on the TV. So I say, "Alexa, pause DISH", and it waits for me to return from the kitchen, at which time I say, "Alexa, resume DISH".

Or maybe, when I return with a full glass in one hand and a new plate in the other, I realize I forgot to pause to hear this good story from its start. So I say, "Alexa, skip DISH backwards 3 minutes", and I still get to catch the whole story.

I use this every day. Or until I acquire a third hand.
navychop
The Resurrectionists can help you with that.

For a price.
  • Like
Reactions: charlesrshell