Social Feed

blackjackmark
Last reply · posted in DISH Network Support Forum
I have a unique situation than most in that it's just me in the house. I currently have a 922 from which I use the HDMI output to feed the bedroom TV through an HDMI to Ethernet converter. The big TV in the living room is fed off the component output from the 922. I then use the RF output on the 922 to feed the other two small SD TVs (19") in the house, all in solo mode.

From what I've gathered, I will use the Composite output from the Hopper into an RF modulator to feed the two SDTVs. I will then do the same thing on the Hopper for HD as I do today on the 922. (Feed the HDMI through the ethernet comnnection to the bedroom, and the main TV through the component. A concern had been the potential for Dish to start downconverting the component output to 480 but the consensus from an earlier post sounds like Dish will only do that if forced to do so by the owners of the programming.

So, I should be able to do this all with existing wiring and the existing $10 fee. (However, it sounds like the Solo Node for the Hopper will need TWO feeds from the Dish. Right now I have the 922 fed from a wsingle cable from the Dish, so that may be a slight, but easy change of simply mounthing that Solo Node outside (hopefully its weather-resistant like the other setups?). That single feed will go into the basement to the tap, which will then feed the Hoopper and possible future Joeys.

With all this, I gain a faster box, PTAT, double the usable hard drive space (from 500GB to 1TB) and a third tuner. I will give up OTA but I only reliably get two of the four networks anyway on it, so I only use those in instances of needing three broadcast network recordings at once...which I will no longer need due to PTAT. I also give up Sling, but it NEVER works for me anyway....and I could still add a Slig Adapter. I also gain the ability to easily add Joeys for HD if I ever get a whim and upgrade to a bigger TV in the office, kitchen or guest room.

My fee should remain at $10.

Have I missed anything?
2 Replies · 1538 views
Scherrman
I have a unique situation than most in that it's just me in the house. I currently have a 922 from which I use the HDMI output to feed the bedroom TV through an HDMI to Ethernet converter. The big TV in the living room is fed off the component output from the 922. I then use the RF output on the 922 to feed the other two small SD TVs (19") in the house, all in solo mode.

From what I've gathered, I will use the Composite output from the Hopper into an RF modulator to feed the two SDTVs. I will then do the same thing on the Hopper for HD as I do today on the 922. (Feed the HDMI through the ethernet comnnection to the bedroom, and the main TV through the component. A concern had been the potential for Dish to start downconverting the component output to 480 but the consensus from an earlier post sounds like Dish will only do that if forced to do so by the owners of the programming.

So, I should be able to do this all with existing wiring and the existing $10 fee. (However, it sounds like the Solo Node for the Hopper will need TWO feeds from the Dish. Right now I have the 922 fed from a wsingle cable from the Dish, so that may be a slight, but easy change of simply mounthing that Solo Node outside (hopefully its weather-resistant like the other setups?). That single feed will go into the basement to the tap, which will then feed the Hoopper and possible future Joeys.

With all this, I gain a faster box, PTAT, double the usable hard drive space (from 500GB to 1TB) and a third tuner. I will give up OTA but I only reliably get two of the four networks anyway on it, so I only use those in instances of needing three broadcast network recordings at once...which I will no longer need due to PTAT. I also give up Sling, but it NEVER works for me anyway....and I could still add a Slig Adapter. I also gain the ability to easily add Joeys for HD if I ever get a whim and upgrade to a bigger TV in the office, kitchen or guest room.

My fee should remain at $10.

Have I missed anything?

That sounds about right and is very close to my current setup.
W
Mine as well, although I have two HDTVs fed via HDMI (HDCP compatible HDMI splitter and in-wall HDMI between floors). I don't have the component in use any more, but I have a similar component to ethernet function built into my receiver, if I ever want a remote HDTV in the house...

I hate to have to have to add a modulator for the SD TV, but that is what has to happen. I do NOT want a separate feed on that SDTV, which is across the room from one of the HDTVs and often used at the same time to watch the same program - everything in the house needs to watch the same thing at the same time with no audio delays between HD and SD!
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
117 Replies · 1148 views
meStevo

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
harshness
If it weren't for the sky-high electricity prices...

Of course, the real scare with Winter coming is the insane cost of heating oil.
  • Sad
Reactions: Jimbo
osu1991

GM said its next-generation vehicle architecture will provide 40 times more computing power and 30 percent less wiring than before and will expand from the 2028 Cadillac Escalade IQ to its high-volume SUVs, trucks, crossovers, and fourth-generation EVs, which will be powered by lithium manganese-rich (LMR) prismatic batteries

Despite the politicization and perceived consumer pivot away from EVs in America, GM needs to remain globally competitive, so it's doubling down on its fourth generation EVs, with energy-dense, cheaper-to-manufacture LMR batteries, more efficient motors, and state-of-the-art centralized computing architecture. With a stated goal of cutting the traditional four- to five-year concept-to-production time in half, GM is clearly challenging the concept of "China speed," which in the Chinese automotive industry can be as quick as 18 months from design to start of production. In the AI space, GM is smartly collapsing all of its marque-specific apps under the familiar OnStar brand, while providing more features—both on the phone and in the car—than it ever has before.
harshness
Let's tell it like it is. GM's EV efforts are coming from SAIC. The brain trust is almost entirely in China, and GM is hanging off of SAIC's shirt tails.

It is a lot like asserting that the Corvette was designed by Chevrolet when most of it came from the Cadillac CTS-V.
  • Like
Reactions: osu1991
T

Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.

So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.​
That's how Ford did it- vertical integration. He even set up a rubber plantation in S. America
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
I figured some of the guys would be looking here for an answer. You'll need to use this link

I'll mention what happened over there. I don't want to cause Scott any issues or put him in a bad spot.
6 Replies · 231 views
dishstaller
If any of you know some of the guys from the board and you have their contact info, please reach out to them....many failed to update their contact info and some even had starband email addresses.
  • Like
Reactions: charlesrshell
Scott Greczkowski
I figured some of the guys would be looking here for an answer. You'll need to use this link

I'll mention what happened over there. I don't want to cause Scott any issues or put him in a bad spot.
Now I have to go check out what happened now. Lol!
  • Like
Reactions: charlesrshell
Scott Greczkowski
Went and looked, not too bad...

Just let people know the address is satelliteretailer.com as DishRetailer.COM is not working. :)
  • Like
Reactions: charlesrshell
(((Garyd)))
If any of you know some of the guys from the board and you have their contact info, please reach out to them....many failed to update their contact info and some even had starband email addresses.
Your old link triggered my Bitdefender today.
  • Like
Reactions: charlesrshell
(((Garyd)))
Now I have to go check out what happened now. Lol!
I had a direct link to ]Political, thought provoking and debatable but now have to go in the main section or I get a warning on my Bitdefender
  • Like
Reactions: charlesrshell
dishstaller
Now I have to go check out what happened now. Lol!
I sent you a PM Scott. Doesn't really make any sense to me BUT....I've never claimed to be the sharpest knife in the drawer....though I just might be the most persistent. :baby
  • Like
Reactions: charlesrshell
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 2 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68682 Replies · 2681513 views
  • Like
Reactions: c-spand
Bobby
Oh Susanna, Dust off the Old Pianna - Ozzie Nelson & His Orchestra
harshness
Garden Party - Ricky Nelson
  • Love
Reactions: RaiderPower
gms49ers
The Garden - Rush
  • Like
Reactions: long_time_Dish
sdfntx
Safe In My Garden - The Mamas & The Papas
long_time_Dish
Mary Shut The Garden Door - Donald Fagen
  • Like
Reactions: Bobby
T
Last reply · posted in DISH Network Support Forum
I have Dish Hopper and Hopper Plus and also have Alexa Echo. I link the Alex skill to Dish and it asks me to enter the pairing code shown on the TV. I go into Dish Settings and there is no Alexa shown. Not sure what to do.
18 Replies · 868 views
  • Like
Reactions: tanman
navychop
Ungood.
  • Like
Reactions: charlesrshell
R
What is the purpose of connecting Alexa and the H3?
  • Like
Reactions: charlesrshell
navychop
Tell Alexa verbally what to do.
snissen
What is the purpose of connecting Alexa and the H3?
I stand up from my chair with my glass in one hand and my plate in the other, when a story I really want to hear comes on the TV. So I say, "Alexa, pause DISH", and it waits for me to return from the kitchen, at which time I say, "Alexa, resume DISH".

Or maybe, when I return with a full glass in one hand and a new plate in the other, I realize I forgot to pause to hear this good story from its start. So I say, "Alexa, skip DISH backwards 3 minutes", and I still get to catch the whole story.

I use this every day. Or until I acquire a third hand.
navychop
The Resurrectionists can help you with that.

For a price.
  • Like
Reactions: charlesrshell