Social Feed

M
Supporting Founder
Last reply · posted in FTA Receiver / Equipment Support
I've seen it brought up a few times now from folks who just got their MicroHD and it has to do with the "moving dish" popup on the screen. Folks have reported it as a bug or a feature change

I noted it right away when I got mine in the review and Brian did respond at the time. Here is that snippet

One thing that really bugs me is there is a "moving dish" popup that shows up no matter what you do. I know some receivers have it but most that popup leaves right away. This stays up for 15 seconds unless you hit "exit" before that. This shows up if you go into the transponder list and antenna setup. I understand if you are going from say 83W to 91W but why when you are on 91W already and you want to blind scan it does that popup when you hit OK to scan? The only time it is rather quick is when you power it on for the first time. It only shows up for about 2 seconds. I know my Coolsat 5000 only does it for a couple seconds but I'm still using version 1.00 software. Anything else (including the factory 3rd party stuff) has that popup too for longer.
This is what SatelliteAv sent back to me about it
"Dish Moving" - It also drives me nuts! We are working on this irritant so the display will leave after 3 or 4 seconds, but their are other functions hard coded by ALI that is making this very difficult. If the display is programmed to disappear earlier, there is currently no way to prevent he next step of the process from starting. There are no time place holders without the display. The result is if the display is removed early, the next event step starts. What happens for example is that if in a scan mode, the scan is initiated prior to the dish landing on the target satellite. I have been playing with displaying a blank screen, but this can confuse the user as you still must either press exit to skip to the next step or wait. If the user does not visually see that a motor move event command is still waiting to time out, the RCU would not function until the exit button was pressed or the event times out. It is totally a ALI coding issue that we are fighting a work around


The easiest fix right now it to hit "exit" when it pops up. The motor still will move properly :)
6 Replies · 1485 views
jdbob
In normal usage there is no reason to have the "moving dish" display or delay at all. You will get video once the satellite motor is done moving.I would agree that the delay is required when doing things like a blind scan to avoid missing transponders. Perhaps a flag in the software to defeat the display and delay step when just changing channels, leaving the display and delay step for all configuration operations.
Pixl
In normal usage there is no reason to have the "moving dish" display or delay at all. You will get video once the satellite motor is done moving.I would agree that the delay is required when doing things like a blind scan to avoid missing transponders. Perhaps a flag in the software to defeat the display and delay step when just changing channels, leaving the display and delay step for all configuration operations.

Agreed! I've been nagged by this all afternoon as I scan in my sats.
I don't see a need for it other than entering a scanning session. Can anyone else see why it needs to be there.
digiblur
I say put an option to disable it. No need for me either.

Only real use would be the blind scanning. But if I am on 120 or so and want to scan 70 anyways it is going to take a while to move there. Much longer than the nag screen. I would go into the sat setup screen and go let it move first. This is what I always did with other receivers.

I have a suggestion for a new feature on the blind scan screen if the moving dish nag can be removed.

Sent from my C64 w/Epyx FastLoad cartridge
AJV
AJV
Yeah! If you were on a ku sat last, when scolling down with no page up or page down button motorized dishes must b jerking all over.
Some how need command it to move, not move automatically while scrolling through sats. A quick flash on the screen would be sufficient.
Of course sometimes it doesn't come up on mine. Don't know if is certain sats or what.

AL
cyberham
Ouch. I thought this irritant would be gone when I switched from my S9 to the microHD. With my S9, when I start moving quickly through remote functions, it sometimes seems like half my actions include pushing the exit button to get rid of the dish moving display. Pretty frustrating.
xtgold
openbox firmware prior to may 2011 didn't have the nag.
the ali coding reference was interesting.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
24 Replies · 1025 views
  • Like
Reactions: LQQK and reubenray
N
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
  • Like
Reactions: charlesrshell
jsmit86
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
long_time_Dish
They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
Oh, you mean "soon"? :biggrin
Almighty1
It's a known issue.
For a temporary fix, go into the menu, Audio, and turn Dolby Audio "OFF". You will have PCM stereo audio.

I was able to give the tech ops team some data logs so they could diagnose the problem, and they rolled me back to H708 temporarily. It fixed that issue.

They let me know that they understand what caused the issue, and it will be fixed within a few weeks in a new update.
I guess they will be busy when lots of people start asking for rollbacks to H708 now that you mention that downgrades of software does exist because it will likely fix the OTA Single Tuner and the IR Remote problems in H710-H713.
navychop
it will likely fix the OTA Single Tuner

:popcorn
  • Like
Reactions: charlesrshell
dishstaller
it will likely fix the OTA Single Tuner
🤣

Oh....you were serious
teachsac
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Hondo is back with a new squad 9/25 only on Starz.


View: https://m.youtube.com/shorts/b0gPzA8KHEQ
7 Replies · 96 views
  • Like
Reactions: dfergie
K
Never watched the previous shows, so doubtful.
teachsac
Started watching yesterday. Not too bad.
Scott Greczkowski
Wife likes it.
  • Like
Reactions: teachsac
teachsac
I like Zyra from La Brea (one with the prosthetic).
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68536 Replies · 2673434 views
  • Like
Reactions: c-spand
Bobby
I Saw The Light - Todd Rundgren
long_time_Dish
Little Bit Of Light - Strange Weather
  • Like
Reactions: dishstaller
EatMyVolts
A Little Bit of Soap -- The Jarmels
long_time_Dish
Give A Little Bit - Supertramp
dishstaller
Little Wing - Jimi Hendrix
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
115 Replies · 1816 views
  • Like
Reactions: Jimbo and dfergie
meStevo
Browns lead the AFC North 🤣

Seth Meyers What GIF by Late Night with Seth Meyers
Foxbat
I guess even the patience of us laid-back Hoosiers has its limits:
rvvaquero
I guess even the patience of us laid-back Hoosiers has its limits:
Be nice to see a Cowboy headline like that.
M
I guess even the patience of us laid-back Hoosiers has its limits:

Can we expect to see a new coach if we say "pretty please?"
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Stargate SG-1 cancelled, Atlantis renewed
clear.gif

Monday - August 21, 2006 | by Darren Sumner
clear.gif

The future of Stargate is in question today, as SCI FI Channel has cancelled the long-running Stargate SG-1, Multichannel News reported today and a GateWorld source has confirmed. The news regrettably follows the airing of the show's milestone two-hundredth episode on Friday.

Stargate Atlantis, meanwhile, has been renewed for a fourth season, with the network hoping to see that the spin-off series can stand alone, according to a source.
Source Gateworld
2033 Replies · 184127 views
R
I have gotten back into watching SG-1 and I have recorded most of the episodes to binge watch. What episodes are about the Antarctic or was this a movie? Also where could I watch the SG-1 movies?
osu1991
long_time_Dish
I have gotten back into watching SG-1 and I have recorded most of the episodes to binge watch. What episodes are about the Antarctic or was this a movie? Also where could I watch the SG-1 movies?
Well, there are a couple involving the Antarctic. "Solitudes", S1 E17 (one of my favorites), Then, "Lost City', S7 E21 and E22. Then, in the SGA pilot, "Rising", S1 E1 and E2, it starts out in the Antarctic for about the first 20 minutes or so.
R
Well, there are a couple involving the Antarctic. "Solitudes", S1 E17 (one of my favorites), Then, "Lost City', S7 E21 and E22. Then, in the SGA pilot, "Rising", S1 E1 and E2, it starts out in the Antarctic for about the first 20 minutes or so.
Which one has O'Neil being Ancients? I am at the end of Season 8 now.
long_time_Dish
Which one has O'Neil being Ancients? I am at the end of Season 8 now.
If I understand your question, O'Neill had the Ancient's knowledge in the "Lost City" two-part episode. That was when Anubis attacked Earth and there was a big battle over Antarctica.
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
152 Replies · 1925 views
  • Haha
Reactions: Mike0616
Foxbat
Best fan sign I saw during the ND-BYU game: "Bear ate your Lucky Charms!" (Bear being the Cougars' QB). I was going to suggest, "Have you or your team been involved in a Carr crash?"
  • Haha
Reactions: Jimbo and Mike0616
M


They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
  • Like
Reactions: Howard Simmons
Jimbo
They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
Yup, I agree, I'd rather be 2 or 3 till the last few weeks.
  • Like
Reactions: Mike0616