Social Feed
I have been out of the FTA scene since my Diamond 9000HD took a power surge (or something happened) and now it simply will not power up. Now that spring-like weather is almost here (I HOPE!!!) I'm debating on whether to try to get back into FTA. This would be partly so I could record certain programs for someone else in my family, which explains my second question below. So...
- Is there currently a HIGH DEFINITION feed of CBS in the clear?
- Is there currently a HIGH DEFINITION feed of the CW in the clear? If so, is it a primetime-only feed or a 24 hour feed?
- Is there any FTA receiver available that has a network connection jack that will allow you to steam either live programming or recorded programs (preferably both) to other computers or similar devices in your home? And if so, which one(s)?
- Or, is there any hardware device (PCI card, USB connected device, etc.) that you know of that integrates well with MythTV (which is Linux-based software) and does NOT require that you have a Windows box available? It's frustrating to read about hardware devices and then find that they are really only useful with Windows Media center, or some other piece of Windows-specific software?
I posted this in this forum because of the first two questions, but if they would be appropriate for the main FTA forum then I don't mind if the moderator moves this post there. Take a guess which two networks we can't get reliably with an OTA antenna!
- Is there currently a HIGH DEFINITION feed of CBS in the clear?
- Is there currently a HIGH DEFINITION feed of the CW in the clear? If so, is it a primetime-only feed or a 24 hour feed?
- Is there any FTA receiver available that has a network connection jack that will allow you to steam either live programming or recorded programs (preferably both) to other computers or similar devices in your home? And if so, which one(s)?
- Or, is there any hardware device (PCI card, USB connected device, etc.) that you know of that integrates well with MythTV (which is Linux-based software) and does NOT require that you have a Windows box available? It's frustrating to read about hardware devices and then find that they are really only useful with Windows Media center, or some other piece of Windows-specific software?
I posted this in this forum because of the first two questions, but if they would be appropriate for the main FTA forum then I don't mind if the moderator moves this post there. Take a guess which two networks we can't get reliably with an OTA antenna!
13 Replies
·
2807 views
A
The AzBox units definitely sound interesting, especially the miniMe American Edition. If at all possible, please consider adding the functionality to make it work as a PVR backend for XBMC. If it could do that, I'd be much more likely to buy one! Although I suspect the biggest challenge there might be populating a schedule grid, since most North American stations don't feel the need to send any program data along with the signals.
Basically I am looking at this and at the TBS MOI, assuming they ever actually start shipping the thing and someone reviews it. But what I don't know is if the MOI will do 4.2.2. If it won't, that will really be a dealbreaker. Anyway, I'll just wait a while and see if one of those two actually does what I want. I wish the AzBox weren't quite so high in price (almost double the price of the MOI), because it looks like a really nice unit, but anything higher than about $100 is a bit rich for my budget.
I assume the AzBox supports DiSEqC and 22 kHz tone switches, correct?
I have a feeling that the next time I get a receiver I'm going to have to update my C-band dish feedhorn (it's still one of the old C/Ku units with the little blue polorotor thing on it) and also get a new positioner controller that can be controlled by the receiver (still using an old analog C-band receiver just to move the dish). It's one of those old 10' Winegard perforated metal dishes so with a modern feedhorn I'd probably not have any issues with signal strength on the C-band signals. If only half of the arc were not obstructed by trees that are not on my property! Seems like so many of the big oak trees are dying around here and yet the one oak I'd really like to see die never does.
I THINK I can still get that 91W bird okay but anything east of that pretty much goes away when the leaves come out. But anyway, it won't be just the cost of the receiver, it will also be the new feedhorn and positioner too, and that's a pretty big gulp to swallow all at once.
Basically I am looking at this and at the TBS MOI, assuming they ever actually start shipping the thing and someone reviews it. But what I don't know is if the MOI will do 4.2.2. If it won't, that will really be a dealbreaker. Anyway, I'll just wait a while and see if one of those two actually does what I want. I wish the AzBox weren't quite so high in price (almost double the price of the MOI), because it looks like a really nice unit, but anything higher than about $100 is a bit rich for my budget.
I assume the AzBox supports DiSEqC and 22 kHz tone switches, correct?
I have a feeling that the next time I get a receiver I'm going to have to update my C-band dish feedhorn (it's still one of the old C/Ku units with the little blue polorotor thing on it) and also get a new positioner controller that can be controlled by the receiver (still using an old analog C-band receiver just to move the dish). It's one of those old 10' Winegard perforated metal dishes so with a modern feedhorn I'd probably not have any issues with signal strength on the C-band signals. If only half of the arc were not obstructed by trees that are not on my property! Seems like so many of the big oak trees are dying around here and yet the one oak I'd really like to see die never does.
I THINK I can still get that 91W bird okay but anything east of that pretty much goes away when the leaves come out. But anyway, it won't be just the cost of the receiver, it will also be the new feedhorn and positioner too, and that's a pretty big gulp to swallow all at once.
with the MOI going for $140, your demands seem a bit unrealistic.
4:2:2 for $100, is a pipe dream as well.
There were two recent threads on $50-ish S2 receivers.
I found them both lacking polish and sophistication.
Several members jumped on 'em, and I'll let you read about their exploits.
we have a whole AZ sub forum...
but you can be sure it xxxx well better! :up
if I were looking for a 10' dish, that'd be high on my shopping list.
Supporting Founder
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
146 Replies
·
1575 views
Nah, you just don't understand how ignore works, which is why you made your own NFL thread thinking there wasn't one
Was thinking same thing. It should be a good week for sec shorts and roll callThey ought to have fun with this…
Lifetime Supporter
A continuation of a thread from the pub, just general discussion of AI.
Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.
View: https://youtu.be/DRm0mbp_n1k
We've literally got a movie already about this
View: https://youtu.be/a2PW7a9ViDc
Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.
View: https://youtu.be/DRm0mbp_n1k
We've literally got a movie already about this
View: https://youtu.be/a2PW7a9ViDc
62 Replies
·
1050 views
Oops.
futurism.com
AI Agent Blamed for Deleting Entire Upcoming Season of TV Show
An AI agent reportedly deleted the entire final cut of the upcoming season of a Swedish reality competition show.
futurism.com
Pub Member / Supporter
Lifetime Supporter
I was watching some of this guy's stuff and realized some of you may not be familiar. Basically his show is Candid Camera meets a magician. This is a comp of a few of his exploits. I first learned of him when I was out at a meeting in Denver about 10yrs ago. The men I was sitting at the table with started talking about this show and said it was one of the funniest things they had seen. When I got home I started watching it....yes, it is funny.
View: https://www.youtube.com/watch?v=gIU09F8jdwc
View: https://www.youtube.com/watch?v=gIU09F8jdwc
2 Replies
·
50 views
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).
On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
22 Replies
·
310 views
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.
At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.
This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.
This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?
This explains it better than I can. Sorry, had to take all the ads out.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?
This explains it better than I can. Sorry, had to take all the ads out.
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68515 Replies
·
2671833 views
Staff member
Pub Member / Supporter
Cutting Edge
The TPN Map Excel Presents all DIRECTV Channels:
Understanding the TPN Map
Making Sense of the TPN Map Display Conventions
National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)
Local (Local-Into-Local or narrow/Spot beams)
Additional tabs provide:
OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8
Understanding the TPN Map
Making Sense of the TPN Map Display Conventions
2142 Replies
·
929760 views
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.
I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2135 Replies
·
214814 views
Tony as the director.
Would you rather have LaRoche ???Tony as the director.
No. Bring in someone new.
Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
I don't think Tim and Tony are that far apart in Age ...No. Bring in someone new.
Remember what Tony said to Tim when they first got back together ...
Tony said: I am the New Tony, Tim .... (something to that effect)
Tony has changed, he's been running his Security Business ... I'm sure he has grown up.
Give it time ... your judging the New Tony from the old Tony.
It sounds like Tim won't be around the Team much longer either.
Lon.TV
Time for another AWESOME video from Lon Seidman of LON.TV!
View: https://www.youtube.com/watch?v=XBnhKwMxIhs
Direct YouTube Link - Local AI Coding from Scratch: A Practical Beginner's Guide
The Official LON.TV Website
Lon on Facebook
View: https://www.youtube.com/watch?v=XBnhKwMxIhs
Direct YouTube Link - Local AI Coding from Scratch: A Practical Beginner's Guide
The Official LON.TV Website
Lon on Facebook
0 Replies
·
17 views
Staff member
Pub Member / Supporter
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.
If you've already reported this to me, please repost it here so I can track all instances in one thread.
Thanks!
Brittany
If you've already reported this to me, please repost it here so I can track all instances in one thread.
Thanks!
Brittany
23 Replies
·
718 views
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.
A little frustrating to have the game broken up like that but at least the Brewers won
Yea, I've only been a CIO for the last 30 years!
Trust me, when something important breaks, they get to own it!
Staff member
HERE TO HELP YOU!
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
42 Replies
·
3633 views
