Social Feed

BradleyD
Last reply · posted in DISH Network Support Forum
I am a current DISH customer living in Knoxville, TN. Sometime next year, I would, like to upgrade from DISH 500 to HD. I am currently pointed to 110, 119, and I have line of sight to 129. That means a 1000.2 should work for that. However, local HD here is on 61.5 and DISH says there is no plan to have local hd on the western arc sats. Also, 72.7 and 77 are out of the question because of trees that are way higher than ~45 degrees line of sight. I have tried to get info from DISH chat and really haven't gotten clear answers except for things like...the installer will take care of it. I have searched the internet also and am not sure that I have gotten clear info. I joined this forum since I have been able to find good information here and I would like to see if I can get help with the following questions.

1. It seems that Knoxville subs will get eastern arc equipment. I simply cannot get 72.7 and 77 because of line of sight. Western arc equipment will work fine (except for local hd obviously). Can DISH get me western arc equipment when I tell them this without much hassle or is it a pain to get this done since Knoxville is an eastern arc market?

2. Since I can get 61.5 with no line of sight problems as determined from my own checks, can another satellite be placed in another location (in this case, high on the corner of the house instead of in the yard) and take care of the local hd channels? 61.5 is the only direction this satellite would receive as 72.7-129 would be blocked by trees and the house no matter where one is placed unless of course it is hundreds and hundreds of feet from the house which obviously is not going to happen. I am pretty sure it can, but wanted to ask it to get to question 3.

3. If the answer to #2 is yes, can anyone tell me what dish I will get for the local hd channels? I know western would be 1000.2 to get the 3 sats. Will the local hd dish be an 1000.4 (eastern) or is it some other type of dish?

4. Since 2 sats would be used, if I get a hopper (maybe with sling), there would be no problems getting all signals from both sats into the receiver and to one joey, correct?

5. Since I would need 2 dishes, does anyone know if this costs more? DISH was not really helpful at all with this.

6. With 2 dishes and a hopper and one joey, I assume each sat will have one cable that comes into the hopper and then one cable goes from the hopper to the joey. Is this correct or does the joey have to have 2 cables to it?

7. Since I assume I would have 2 cables (rg6) coming into the hopper (1 from each sat), does this take up an extra tuner in the hopper which would diminish the number of channels that can be recorded, etc.?


Thanks.
25 Replies · 6261 views
boba
Stop worrying until that "sometime next year" arrives. DISH will install what is appropriate when you are ready, the way they change things they may change you to Western Arc by the time you are ready or they could introduce new dishes and receivers. There is an old phrase "yesterday is history tomorrow is a mystery". Your asking questions for at least 3 months in the future, we don't know you will even be alive.
the mack
we don't know you will even be alive.

What a DB thing to say to someone, people come here to learn, not be blasted by the few people who ''think'' they are running sh*t around here.

If you don't like someone's questions, just don't reply. simple really, except for those who just can't help being a di*k.
BradleyD
Thanks boba. I kinda figured that after reading more, but your confirmation helps. I would rather have the larger dish anyway. I take it the 1000.4EA dish is being phased out. I thought they needed it larger than a 1000.2 for EA, but I guess it is unnecessary if they are not going to use 77. I'm just glad I have a space not too far from the house and I can locate the dish where it will also see 77 if it is needed in the future. Because of the cable run, I've got to get it where it won't need to be moved. The ~46° angle is great.
Tampa8
What a DB thing to say to someone, people come here to learn, not be blasted by the few people who ''think'' they are running sh*t around here.

If you don't like someone's questions, just don't reply. simple really, except for those who just can't help being a di*k.

Well dude, this is but one reason why a couple of us, who did not blast, did not suggest no questions be asked, but made a statement about changes in the future said what we did. Experience tells us a moments notice things change.....

http://www.satelliteguys.us/threads/320010-Eastern-Arc-vs-Western-Arc/page2

In particular;
Figures. DISH looks like it is finally getting all the locals to 61.5 and they add new ones to 77sat. You can never know when it comes to DISH whether a discontinued dish stays discontinued or not. THey have so many different configurations to go with.
B
Dish does change things at will. I am 90 miles east of you in Johnson City and we are pure western arc. Are you working directly with Dish or with a local retailer? A local retailer will be able to offer a more customized solution for you.
RT-Cat
Thanks boba. I kinda figured that after reading more, but your confirmation helps. I would rather have the larger dish anyway. I take it the 1000.4EA dish is being phased out. I thought they needed it larger than a 1000.2 for EA, but I guess it is unnecessary if they are not going to use 77. I'm just glad I have a space not too far from the house and I can locate the dish where it will also see 77 if it is needed in the future. Because of the cable run, I've got to get it where it won't need to be moved. The ~46° angle is great.
Things do change quickly with Dish. My 1000.4 was replaced with a different dish with only two LNB's after being "off" for just over three months. The installer did say the 1000.4 was going bye, bye. I am on the EA.
.
RT
BradleyD
Dish does change things at will. I am 90 miles east of you in Johnson City and we are pure western arc. Are you working directly with Dish or with a local retailer? A local retailer will be able to offer a more customized solution for you.

I've done it through DISH since I got it. My setup will be easy. 1 Hopper and 1 Joey and that's it. Easy. Thanks to everyone's help, I know what type of dish I would get now, but know it can change. However, since I know about what is current now, I will understand much better why things have changed if they do between now and the time of my install. I formerly worked for an ILEC in dsl technical support including assisting installers and working with the dsl provisioning side of the telco. I was then and am now quite aware that things do change...sometimes very quickly. However, I also know that if I am educated about something, I have a better chance of making proper choices even when change comes.

Finally, I will ask for an installer to come by and check to make sure I have found the correct place to put the pole for the satellite. I am confident I got it right, but I do not want to prep the wrong area.
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
A continuation of a thread from the pub, just general discussion of AI.

Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.


View: https://youtu.be/DRm0mbp_n1k


We've literally got a movie already about this ;)


View: https://youtu.be/a2PW7a9ViDc
67 Replies · 1119 views
meStevo
Agreed, it mostly regurgitates known solutions. That's the point. Nobody needs an innovative fix for a driver error or a creative way to format a report. Let it handle the solved problems so people can spend their time on the ones that aren't.
harshness
Agreed, it mostly regurgitates known solutions. That's the point.
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.
meStevo
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

Addressed by what you didn't quote. This cycle is as old as computing: compilers, libraries, frameworks each automated the tedious part, and the human work moved up a level. Innovation didn't end; it shifted. And people still make new compilers, libraries or frameworks.

Nobody's forced to hand anything off. Anyone who wants to keep doing it by hand still can, and people who couldn't do it at all now can.
harshness
... and people who couldn't do it at all now can.
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.
meStevo
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.
You're not wrong, but that's part of learning. Whether from others or our own mistakes, we've all learned that lesson one way or another.
harshness
Whether from others or our own mistakes, we've all learned that lesson one way or another.
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.
meStevo
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.
  • Like
Reactions: telstar_1
dishstaller
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.
meStevo
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.

That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:


In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.

Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.

1792355686329.webp
T
Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.



This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.
You invested in datacenters?
meStevo
You invested in datacenters?


Though, I do have stocks in my portfolio that benefit from data centers.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 4 views
Former member 208119
Last reply · posted in SiriusXM Satellite Radio
My year was almost up and we got the new bill for a year of service for $ 360.00 insane sat radio is becoming like cable!!! i logged into my acct and hopped onto chat and told the rep that i wanted to cancel. she understood my concern and went quiet for a few minutes. i figured that she was canceling my service. she comes back and said that she seen that i have been a sub since 07 and then offers me the same package for a year for 120.00 with taxes and fee's!!! i grabbed it. after almost having a stroke :biggrin
236 Replies · 10928 views
B
What i noticed with my last renewal XM is now billing me $4.99 monthly instead of one time yearly payment.
Jimbo
What i noticed with my last renewal XM is now billing me $.99 monthly instead of one time yearly payment.
Did you accidentally get on the wrong plan ?
I still do the once a year plans.
EarDemon
I tried to do that, when I did delivery driver work (2010- 2013), we had a fleet of Freightliners. The newer trucks had headunits that were satellite compatible (XM only I think), but lacked the antenna and guts. I got a car kt for my old Roady XT and tried to use it, but at the volume levels I needed have it at to hear it over the diesel engine it sounded like crap, so I used my phone with an aux cable. When I was in the middle of nowhere with no cell service it didn't do me any good though.

At my current job, one of our new cars has the free trial of SXM active, I frequently have to go off site to a location 75 miles away in a rural area and it's nice being able to use the service off of the satellites versus using the app. There are many places on this journey where all three providers lack service.
B
Did you accidentally get on the wrong plan ?
I still do the once a year plans.
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!
  • Haha
Reactions: Jimbo
TRG
TRG
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.
B
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.
Jimbo
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.
You get an email every month to let you know they are billing you for the next month.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68525 Replies · 2672407 views
  • Like
Reactions: c-spand
Bobby
Mississippi Cotton Picking Delta Town - Charley Pride
harshness
Delta Dawn - Tanya Tucker
dishstaller
Can't You See - Marshall Tucker Band
sdfntx
See You in September - The Happenings
long_time_Dish
You Look Like You Love Me - Ella Langley
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
111 Replies · 1705 views
  • Like
Reactions: Jimbo and dfergie
osu1991
  • Like
Reactions: Mike0616
M
Hopefully nowhere near a microphone.
Y
Hopefully nowhere near a microphone.
After having experienced Gus Ferguson trying to call soccer games, I'm uncertain why NFL football analysts get hate. Even the "worst" of them are pretty good.
meStevo
Jalen Hurts out indefinitely as they treat and monitor a superficial blood clot in his leg.


View: https://x.com/RapSheet/status/2111074303185989663?s=20
  • Sad
  • Wow
Reactions: Mike0616 and Foxbat
meStevo
Browns lead the AFC North 🤣

Seth Meyers What GIF by Late Night with Seth Meyers
  • Wow
Reactions: Mike0616
T
Last reply · posted in Free To Air (FTA) Discussion
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
5 Replies · 148 views
Titanium
Yes, many have hacked a DirecTV or Dish Network dish before. Quite undersized, but would receive the 97w KU stations with an LNBF swap. Make a template to set the LNBF face angle and distance from the reflector. Remove the current circular polarity LNBFs and make a bracket to hold the replacement linear LNBF in the correct centered position. Remember to set the polarity skew.
  • Like
Reactions: TVHabit and FTA4PA
B
would probably also work well for NHK on 101W and possibly for PBS on 99W. I used one for a while on 30W. Just keep in mind that because it's undersized for those satellites, it might work fine in clear weather but won't have much margin to account for signal degradation during rain/snow
  • Like
Reactions: TVHabit
O
If you can find one, the Shaw / Star Choice 75e ellipticals are great for use on 97, 99, and 101W. They are really just rebranded ChannelMaster 75 cm reflectors and use linear LNBFs by default out of the box.

Everyone else's mileage may vary.
  • Like
Reactions: TVHabit
T
I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...
Titanium
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
LNBF mount.webp
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Chit Chat Club
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5550 Replies · 460540 views
Bobby
Regular$6.099​
Premium$6.599​
Diesel$7.999​
at Costco, Rohnert Park.​
Bobby
Regular$5.999​
Premium$6.399​
Diesel$7.999​
at Costco, Rohnert Park.​
  • Like
Reactions: harshness
harshness
I wonder if California is getting into the Winter formula.
dishstaller
Regular$5.999​
Premium$6.399​
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.
harshness
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.
On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.
K
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
Season 2 order already in hand:

'Star Trek: Starfleet Academy' Renewed for Season 2, Tatiana Maslany to Guest Star in Season 1

I've not been optimistic about this show based on what I've read so far. Seems to be aimed at a younger audience. Interesting though that Tatiana Maslany will have some sort of role.
80 Replies · 3162 views
K
I'm sure I will watch at least the first episode but I am not optimistic.
K
I'm sure I will watch at least the first episode but I am not optimistic.
Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.
  • Like
Reactions: MikeD-C05
MikeD-C05
Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.
Yeah, the foot stuff was just nasty. I kept thinking of how dirty her feet would get traipsing around shoe-less. Funny, I love being shoe less at home and never wear shoes indoors in my home for long, but seeing her laying on all her furniture with her bare feet hanging out just kind of grossed me out.
  • Like
Reactions: long_time_Dish
harshness
I kept thinking of how dirty her feet would get traipsing around shoe-less.
Where would this "dirt" come from? Dead skin and dandruff?
MikeD-C05
Where would this "dirt" come from? Dead skin and dandruff?
There would still be dirt ,dust in the future I am sure. So walking around the station like she did she would get stuff on her feet. I am sure the robot vacuum is still going to miss stuff, with all those different alien species running around there.
  • Like
Reactions: long_time_Dish
harshness
There would still be dirt ,dust in the future I am sure.
Where is it going to come from -- specifically?

Why do you think cleaning technology won't improve in the next few hundred years? HEPA filtration was invented as part of the Manhattan Project.
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
25 Replies · 431 views
navychop
It'll only see two EHDs at a time.
Almighty1
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

1792279578261.webp
  • Like
Reactions: charlesrshell
J
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

View attachment 194857
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.
  • Like
Reactions: charlesrshell
Almighty1
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.
It is not just a display signal as explained above. When you have the Hopper+ connected, it uses Android TV for pretty much everything except for the satellite signal which is why it uses the DISH app for the standard Hopper 3 functions. But that should not matter because in your case, CasinoH3 is the Hopper 3 with the EHD which is what you call the naughty one based on the dates you mentioned and Master Bedroom which has the Hopper Plus connected to the Hopper 3 that does not have the problem. So one way to test the theory is disconnect the Hopper Plus from that Hopper 3 and then use the EHD's connected to CasinoH3 currently to see if the same issue exists. That way you will know if the problem is there without a Hopper Plus connected or if CasinoH3 is just a bad hopper to begin with.

Normally when you disconnect the Hopper Plus, it will be 30 minutes or more before you can use the Hopper 3 again.

What you want to do is:
hold the POWER button in, not the red reset button, for about 45 seconds or so while disconnecting the power to the Plus and moving the HDMI cable and it will reboot to the normal Hopper only immediately.
  • Like
Reactions: charlesrshell
bookworm370
It'll only see two EHDs at a time.
Yes, I have only two online at a time.
One comes online, the other one consistently will not come online
  • Like
Reactions: charlesrshell
bookworm370
Yes, I have only two online at a time.
One comes online; the other consistently won't. Also, when I connect the EHD, the USB Detected status light on the EHD itself changes from Red to Green. But the Hopper (713) does not start the EHD read process. The light changes to indicate that the EHD has detected a valid USB cable, but the Hopper does not recognize it.