Social Feed

T
Last reply · posted in DISH Network Support Forum
A couple weeks ago I was called from Comcast stating my internet was going up from 52 dollars a month to 64 for same service ,unless I budled with cable TV service.I was thinking about trying are local cable for a while so I agreed to bundle,but first thing I told them is all I wanted was a HD capable receiver,I said this a few times throughout call to verify,so I got (a so called deal)for cable (digital prefferred package)for 89.99 plus equipment and HD fees(an additional 19 dollars and month(which I got waived for 6 months)and then the gave me HBO free for 2 years.At first this sounded like a great package,so I signed up and put Dish on pause (thank God).
Then came the receiver,SD only ,so had to go replace that,then the programming package wasnt the one promised.The one I wanted was an additional 10 dollars a month and it still did not have all the channels I wanted.We hooked it up very carefully,tightened up everything,first problem we had is we couldnt get activated(account got messed up because we already had internet and wouldnt activate TV,finally after an hour on my cell phone(couldnt use homephone because I use internet to activate Vonage).We finally got it activated and thought my channels where in SD,but no these were HD,very bad quaality compared to Dish HD,and the SD channels virtually unwatchable.On Dish SD and HD came in great.
Comcast on Demand was more of a nuisance as most of the time programming wasnt available or it would get stuck.Then HBO was a Joke,they only have 1 HBO in HD,sure you can go on ON Demand and find some HBO movies,but not all to watch.I like most of my premiums in HD.so that was a bust.
Also unlike dish you did not have a program guide that showed you only the channels you pay for,lot of times I would go thru guide see something I would like to watch ,but I was not subscribed too.My wife wanted Discovery Fit And Health but it was in a higher package and not worth the extra 10 dollars to have.
Anyway I amnot trying to trash Comcast,because this solely was my experience.But I was sure glad to comeback to Dish.We gave them 10 dyas and that was enough..
11 Replies · 2958 views
T
I just wanted people to be aware that the Grass isnt always greenest on the otherside.Even though this was a pain to go thru the last couple weeks,I am glad I did it for I wont be tempted in the future.Also being told by the cable company that is was my TV that was the problem.Connected to Dish the picture compared to cable is amazing,on cable it seemed somewhat blurry and snowy if that s possible.
1
I signed up for Comcast a few weeks ago. Complete nightmare but they are really the only choice for internet around here (only other option is 3mb dsl) and it is $50 for 6mbs and we can use that up if more than one is streaming video, roku, voip, etc. So I got a mailing for 20mbs internet, preferred cable package, whole house DVR, free HBO & Streampix for 24 months at $89.99 1-12 months then $119.99 13-24 months (additional outlets $10).

2 appointments to get it installed (including rant from angry installer about the sales team)
Estimate 10-15 chat sessions to try to get the HBO & Streampix they promised
Estimate 5 long phone calls for same HBO & Streampix
Physically going to Comcast office with letter that says "Free HBO & Streampix" where they basically shrugged their shoulders
2-3 times trying to cancel and getting the retention department where it (I believe?) my plan has gone from 1 year HBO 3 months streampix, to 1 year HBO 1 year streampix, to 2 years HBO 2 years Streampix.
At this point I am not even sure what to believe

They have to be the most dysfunctional company I have ever dealt with. If I am to believe them, they have special sales teams that only have access to certain deals so if they ever mess up your order the regular customer service agent can't fix it because they don't have access to the same deals and the sales team is a sales team and can't change orders post-installation. Also unlike any other big company the employees don't seem to have access to the former chat/call notes so basically you have to repeat your story like it is the first time to every single person you talk with.

I get two HBO channels in HD, full time RSN is nice, NECN (regional news network) is nice. Inability to skip channels not subscribed too is annoying and while you can set up favorites list it changes back to default automatically although I think the software is still buggy at this point.

edit add: BBC World News is good too and SD picture is better on Comcast

Only for internet in my area I would be back to Dish right away
D
I left Dish for cable tv over 6 months ago and love it! Got a 3 room Tivo going and it beats Dish by great lengths. There are times when the grass is much greener on the other side. You just need to be sure its not because the septic tank is leaking!
dwarren2
I just wanted people to be aware that the Grass isnt always greenest on the otherside..
You know why the grass is greener on the other side of the fence? It's because you are looking sideways and can't see all the bare spots you would see fom above!
D
I left Dish for Direct & if that ever doesn't work out I'll be back with Dish. Cable just seem to be stuck in time & very bad customer service compared to the Sat providers. My Dad is with Comcast, has a really good granfathered deal and would have moved him over to Dish or Direct if it wasn't that (and the long learning curve for him).

But his service has been cutting in & out for a few months & after several weeks they finally sent a tech out who diagnosed that the cable coming in from their distribution box on the sidewalk had to be changed. That fixed the problem as they bypassed the original cable that was buried coming into the house but left this large orange cable running over the lawn & driveway into his home after they were finished. They told him someone would come back to bury it. After 3 months & 2 further tech visits, who said it wasn't their department that buried cables, they only rectify signal problems, they finally came & buried the cable today because I threatened to disconnect his account & move him to DirecTV.

I'm still shocked at their service, reminds me of when I lived in the Caribbean. Comcast is really a third rate video service, but their internet is really fast though, when it works.
J
I got a similar offer that I was thinking of doing, but in addition to not in place of DISH. I already have Comcast internet, but cancelled lifeline TV awhile ago when they started scrambling locals. The offer I got in the mail says most of the same things that you listed, except it's supposed to last for 2 years (and I'd be under contract). My fear is much of what you've described. Them messing up the order & price. Taken at face value the offer would cost me $15 additional, and for that $15 I'd get Digital Preferred, HBO, Streampix, X1 HD DVR, $50 Visa card, and I think there was even a year of either Showtime or Starz in there. Would be pretty easy to just drop one of my Dish receivers and get rid of the BB@Home package, making the final cost difference a wash.

But I know Comcast would screw the deal up somehow. That's stopping me from making the call.



I signed up for Comcast a few weeks ago. Complete nightmare but they are really the only choice for internet around here (only other option is 3mb dsl) and it is $50 for 6mbs and we can use that up if more than one is streaming video, roku, voip, etc. So I got a mailing for 20mbs internet, preferred cable package, whole house DVR, free HBO & Streampix for 24 months at $89.99 1-12 months then $119.99 13-24 months (additional outlets $10).

2 appointments to get it installed (including rant from angry installer about the sales team)
Estimate 10-15 chat sessions to try to get the HBO & Streampix they promised
Estimate 5 long phone calls for same HBO & Streampix
Physically going to Comcast office with letter that says "Free HBO & Streampix" where they basically shrugged their shoulders
2-3 times trying to cancel and getting the retention department where it (I believe?) my plan has gone from 1 year HBO 3 months streampix, to 1 year HBO 1 year streampix, to 2 years HBO 2 years Streampix.
At this point I am not even sure what to believe

They have to be the most dysfunctional company I have ever dealt with. If I am to believe them, they have special sales teams that only have access to certain deals so if they ever mess up your order the regular customer service agent can't fix it because they don't have access to the same deals and the sales team is a sales team and can't change orders post-installation. Also unlike any other big company the employees don't seem to have access to the former chat/call notes so basically you have to repeat your story like it is the first time to every single person you talk with.

I get two HBO channels in HD, full time RSN is nice, NECN (regional news network) is nice. Inability to skip channels not subscribed too is annoying and while you can set up favorites list it changes back to default automatically although I think the software is still buggy at this point.

edit add: BBC World News is good too and SD picture is better on Comcast

Only for internet in my area I would be back to Dish right away
1
I got a similar offer that I was thinking of doing, but in addition to not in place of DISH. I already have Comcast internet, but cancelled lifeline TV awhile ago when they started scrambling locals. The offer I got in the mail says most of the same things that you listed, except it's supposed to last for 2 years (and I'd be under contract). My fear is much of what you've described. Them messing up the order & price. Taken at face value the offer would cost me $15 additional, and for that $15 I'd get Digital Preferred, HBO, Streampix, X1 HD DVR, $50 Visa card, and I think there was even a year of either Showtime or Starz in there. Would be pretty easy to just drop one of my Dish receivers and get rid of the BB@Home package, making the final cost difference a wash.

But I know Comcast would screw the deal up somehow. That's stopping me from making the call.

Yea mine is a 2 year contract also. I think you might be fine if the original sales person does their job correct and you get transferred to this telephone thing where you verify that you agree to contract deal electronically. I got transferred but it basically was error but I didn't think much of it at the time (thinking if it was a big deal they would call). Also a few days later I got an email (which was really lacking in detail) but listed some things different but I thought they just had a bad system. If I knew what I know now I would have picked up on these errors and made sure I was getting the right deal before installation because after that they don't seem to really care. Also the installation guys will call the main customer service number if there is any problems when really they don't have the same deals as the special sales team. So if anything goes wrong during installation make sure they call the number that was on the mailing you got.
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
126 Replies · 2138 views
  • Like
Reactions: Jimbo and dfergie
rvvaquero
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
HipKat
Week Six Balls and Goats and WTH is Going On in The NFL??

Browns. 1st place in the North. Yup. Believe it or not

Chiefs. Undefeated.

Titans. Won a game ! .... Colts I know, but still.

Saints. Won a game after a while.

Steelers. Having the same season they always have. They somehow find wins on their way to an unceremonial 1st round exit. Mike Tomlin is proud.

Cards. Won a game without scoring a single touchdown

Broncos. How they manage to win games with the dogshit offense they have should be studied.

Bears. Caleb's back and so is their mojo.


Goats

NFC East. For the 2nd straight week no team from this clown show of a division won a game. Eagles are cooked without Hurts. Who's not that good anyway. Commanders suck, Dallas is well ..... Dallas and the Giants have no QB.

Ravens. Lamar is out (as usual). But still. Losing to the Browns is never ok.

Chargers. Still can't win.

Rams. So much for the powerhouse team. They are 2 games under .500

Seattle. Lost to the offenseless Broncos.
Y
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Johnson built it, but without the Herschel Walker trade, it never happens.
  • Like
Reactions: b4pjoe
b4pjoe
Johnson built it, but without the Herschel Walker trade, it never happens.
Jerry made himself General Manager after he bought the team but make no mistake Jimmy engineered that trade. As well as a lot of others at the time.
rvvaquero
Jimmy Johnson is a football guy. Jerry Jones is a marketer (hustler).

When I see a football player get a 15 yard penalty for unsportsmanlike conduct (like taunting) in a close game, I often wonder what he was thinking. Was he thinking, I'm doing everything I can to make this a better team and help win a championship? Or, was he saying to himself, I want everyone to notice how great I am?

Johnson inspires one, Jones the other.
  • Like
Reactions: b4pjoe and Mike0616
S
· posted in The Chit Chat Club
I haven't posted in almost 17 years. Over the air, sat, offline, anything-but-the-internet is still one of my avid pursuits. Been playing with offline tv viewing and offline web browsing. I have great appreciations for this site still being here. It's so hard to find public communities that haven't sold out to social media company.
0 Replies · 5 views
SkyWatcher57
Pub Member / Supporter
Last reply · posted in Free To Air (FTA) Discussion
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
46 Replies · 1110 views
(((Garyd)))
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
  • Like
Reactions: navychop
navychop
More room for the return of the Plague & Pestilence?

;)
S
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
a good surge protector will help to.
  • Like
Reactions: SkyWatcher57
SkyWatcher57
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
Hi Gary, still working on getting you those
Hi Gary, just saw this, ok, I'll grab some pics tomorrow and post them. thx
Still working getting you those pictures, nice weekends means yard work and fall prep, thanks
  • Like
Reactions: (((Garyd)))
k4otl
Anybody know how to add "hidden" audio channels like for 101 W Ku or 105W C band on these recvr's? I've exported the database file but don't have anything that will read or edit it.
cyberham
For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68578 Replies · 2675998 views
  • Like
Reactions: c-spand
long_time_Dish
One Way Street - Streets
RaiderPower
Working My Way Back To You - The Spinners
  • Like
Reactions: long_time_Dish
long_time_Dish
Find A Way To My Heart - Phil Collins
  • Like
Reactions: dishstaller
dishstaller
Heart of Glass - Blondie
  • Like
Reactions: long_time_Dish
long_time_Dish
Magazine - Heart
TRG
TRG
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
Now that I'm retired, obviously I have different health care insurance. I take 2 prescriptions. With my old insurance I didn't have to pay for either of them, now I do. It's not a huge amount but it led me to dig a little into the cost of prescription medications. I have been using Walgreens for the longest time. But what I found was that Walgreens price is 4.8 times more for one of my prescriptions and the other is 2.3 percent more compared to the lowest price pharmacy. If you pay for prescription medications you might want to have a look at trumprx and see if you can get a lower price.


Screenshot from 2026-10-22 15-43-53.webp
Screenshot from 2026-10-22 15-23-34.webp
11 Replies · 74 views
  • Wow
Reactions: telstar_1
comfortably_numb
I run them through several different providers to see who has the lowest cost

Usually it's Walmart or Sam's + GoodRx

Also...


You can also price them through the CareCard and WellRx apps.

Sometimes Amazon Pharmacy is cheapest.
  • Like
Reactions: TRG
T
TrumpRx?!?

I went on Medicare recently (not an "advantage" plan) and my prescriptions at HyVee were very low out of pocket. The clerk said she was putting them on "Good Rx".
osu1991
I take 10mg Rosuvastatin (Crestor). I was paying $34 for a 90day supply at Walgreens last year when I was on Blue Cross. My Blue Cross premiums were going up to $1800 a month this year, so I switched to an Ambetter Bronze plan (I think that's a Cigna company) for $825 a month. I now have a $40 copay for doctors visits which is fine as I usually only see them once or twice a year, so a huge cost savings. My Rosuvastatin was going to go up to around $90 for a 90 day supply at Walgreens and even more at CVS or one of the local family pharmacies. Ordering online thru my insurance portal from Express Scripts it's $0.74 for a 90 day supply.
comfortably_numb
TrumpRx?!?

Scripts arrive in a gold paper sack.
  • Haha
Reactions: Yespage and meStevo
dishstaller
Usually it's Walmart or Sam's + GoodRx
I'm fortunate and don't take any medications. A couple years ago I had to take some antibiotics and used the GoodRx app. Went to Walmart and the person behind the desk knew me and told me to just buy them outright....the GoodRx price was a LOT higher. She said they aren't supposed to tell customers when they see they are being screwed.
  • Like
Reactions: navychop
navychop
That's ok. I probably take enough for the two of us.

God knows what Bobby takes. Maybe so much they count as a meal?
:D
:devilish
  • Like
Reactions: AZ.
Bobby
That's ok. I probably take enough for the two of us.

God knows what Bobby takes. Maybe so much they count as a meal?
:D
:devilish
Actually I take just 2 prescriptions, Atorvastatin and Lisinopril. They cost me $6 each for 100 pills. Next year that will be nothing.
  • Like
Reactions: AZ. and TRG
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
I was reading this article


That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.


Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
881 Replies · 71416 views
  • Wow
Reactions: MikeD-C05
Bruce
Sony is discontinuing it's last 4K disc player, Panasonic has been rumored to be doing the same, the end of physical media is unfortunately, about to happen.

dishstaller
Sony is discontinuing it's last 4K disc player, Panasonic has been rumored to be doing the same, the end of physical media is unfortunately, about to happen.
Hate to hear that. If you don't physically have something in your hand, you don't really own it.
  • Like
Reactions: navychop
Bruce
Hate to hear that. If you don't physically have something in your hand, you don't really own it.
Even a physical disc purchase is considered a license, just extremely harder to pull access vs digital.

But once new players are no longer sold and older players quit working, that takes care of the access to your library.

See LaserDiscs for one example of that happening.
ncted
Sony is discontinuing it's last 4K disc player, Panasonic has been rumored to be doing the same, the end of physical media is unfortunately, about to happen.

I am so done with Sony on so many levels. This is just one small piece of it.
Jimbo
I am so done with Sony on so many levels. This is just one small piece of it.
I Love my Sony equipment :)
dishstaller
just extremely harder to pull access vs digital.
And dangerous if you get my drift.
navychop
I Love my Sony equipment :)

That's an odd name for it.
  • Haha
Reactions: Jimbo
SuperDish_Fan23
Last reply · posted in DISH Network Support Forum
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
28 Replies · 724 views
S
That's not really unusual. Cable companies like to the provide the box too. The phone company provided the phones in until the government forced them to allow third-party phones.
  • Like
Reactions: charlesrshell
Almighty1
That's not really unusual. Cable companies like to the provide the box too. The phone company provided the phones in until the government forced them to allow third-party phones.
Yes, the Western Electric phones that says "Bell System Property, NOT FOR SALE, Western Electric".
AZ.
AZ.
Yes, the Western Electric phones that says "Bell System Property, NOT FOR SALE, Western Electric".
someone is showing their age
Almighty1
someone is showing their age
LOL. It depends if the person saw it during the years when they were actually still available which is 1968 to 1983 meaning the person could be 43-58 years old or they can even be a few years old if they learned to read and write at a young age and actually saw a telephone with that label somewhere recently just like even here in San Francisco, payphone still exist physically in public places but whether they can be used or not is a different issue. It still looks like this even today:
1792633296785.webp
S
LOL. It depends if the person saw it during the years when they were actually still available which is 1968 to 1983 meaning the person could be 43-58 years old or they can even be a few years old if they learned to read and write at a young age and actually saw a telephone with that label somewhere recently just like even here in San Francisco, payphone still exist physically in public places but whether they can be used or not is a different issue. It still looks like this even today:
View attachment 194957
so that persons in hiding lol:biggrin
  • Like
Reactions: charlesrshell
S
remembers when ATT had stores and leased home phones
dishstaller
My Wife was recently in an antique store and saw a rotary desk phone and it had one of those sticker overlays that had a business listed with phone number under each number on the dial. She looked closer and it had my old Radio Shack listed under the 8...she bought it. Pretty cool keepsake. Back then I rented vhs movies as well so I had it listed as Radio Shack / Movie Gallery and then the phone number.
Almighty1
I remember this in the news too...

  • Like
Reactions: charlesrshell
Bobby
I remember this in the news too...

That is a misnomer. In the old days you subscribed to telephone service. That included the telephone line and one telephone. An extension cost $1 a month extra. So that $14,000 over 42 years was for the service not the leased telephone. There is no way they paid $28 a month for 42 years for a leased telephone.
T
Last reply · posted in C-BAND Satellite Discussion
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
12 Replies · 475 views
Titanium
Our LNBFs are integrated with the feedhorn and no KU option. Maybe install an inline waveguide BPF such as:

www.ebay.com/itm/158077455896
www.ebay.com/itm/960059145385
www.ebay.com/itm/158007483799
B
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
I had the EXACT same problem happen to me with 101w, MeTV mux (Weigel). Working great when about 3 weeks ago I started to get the pixelating, especially at night. Sometimes Jewelry TV would also do it, sometimes not. Tweaked my dish. I have a Titanium 240 feed with the 5G filter 4.0-4.2 band pass. Every other satellite is working fine. Something on their end for sure. Power reduction? My signal seems fine like always. Running a Winegard 8.5 ft dish using a GT Media UHD V8. I'm sure my receiver isn't maybe sensitive enough for lower signal levels. Frustrating here too. I'm in the Canton, Ohio area. Thanks!
arlo
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
B
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
S
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
551 Replies · 19101 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Just a heads up... I just patched our PHP to close the major PHP exploit announced this morning.

Now on PHP 8.4.27 (cli) (built: Oct 20 2026 00:00:00)
harshness
More specifically, these:



A more scholarly story is here:

navychop
"WARNING Will Robinson!"
Don in CT
Just a heads up... I just patched our PHP to close the major PHP exploit announced this morning.

Now on PHP 8.4.27 (cli) (built: Oct 20 2026 00:00:00)
When I heard about this exploit I was wondering how quick you would be on it. :D
Scott Greczkowski
When I heard about this exploit I was wondering how quick you would be on it. :D
12 minutes after the patch was release I had it patched. :)
Foxbat
IMG_1560.webp
A.I. - Be careful what you wish for…