Social Feed

Foxbat
Supporting Founder Pub Member / Supporter Lifetime Supporter
Last reply · posted in DIRECTV General Forum
Being a Dish Network subscriber for 22 years, I am not familiar with the cabling setup for DirecTV (other than the basic RG6Q cable goes to a dish outside) and I'm trying to help out a friend. She went from DirecTV to Dish to U-verse and then back to DirecTV after AT&T acquired DirecTV. She recently had her U-verse upgraded to Fiber to the Home and now has a new Router in her guest bedroom. Also there is a MoCA interface to put the U-verse LAN on to the DirecTV coax (I'm assuming) located next to the Router. I'm not sure if that was put in when the switch from U-verse to DirecTV occurred or when the upgraded U-verse was installed.

Here's the thing: when I helped set up her entertainment center a few years back, I used an spare AirPort Express to place an LAN connection behind the entertainment center for a streaming box and the Denon AVR that has Internet capabilities as well as remote control via an App. With the new Router and with the AirPort Express being orphaned, it no longer functions as a reliable Wireless Bridge and so the streaming box and Denon are isolated.

When I saw the MoCA box I thought it might be possible to use a MoCA drop in-line with the DirecTV DVR (not sure of the model) and tap into the LAN that way.

I guess I should add at this point that the TV room is the old breezeway between the house and the garage, so it has no crawlspace and there is no way to snake a CAT5 cable through the wall from the limited attic as there is a large window in the way.

So, can I get a in-line MoCA tap to attach an Ethernet cable to and present the LAN to the switch in the entertainment center? Does it need to be DirecTV-specific, or is it standard MoCA?

Thanks for your suggestions and help!

Edit: I see I will need to identify the actual model number(s) of the DirecTV equipment because it may be DECA that I need to deal with. I know she called it a Genie and she has a Genie box in the Master bedroom if that helps.
17 Replies · 3606 views
Claude Greiner
Yea you can use a decca to pull eithernet out of the coax.

You can also use 2 decca adaptors in reverse to run a client over eithernet.

They do make gigabyte deccas :)
S
Yea you can use a decca to pull eithernet out of the coax.

You can also use 2 decca adaptors in reverse to run a client over eithernet.

They do make gigabyte deccas :)

Why would you need TWO DECAs to run a client over ethernet? You just need one connected to your ethernet (probably at the end, if you have the ethernet run to the client location) to change it to coax for the client. Your Genie would already have a connection to the network, so as long as the ethernet going to the client is on the same segment as the Genie you shouldn't need another DECA.

Do you happen to know the part numbers for the MoCA 2.0 gigabit DECAs? Haven't seen those...
M
Why would you need TWO DECAs to run a client over ethernet? You just need one connected to your ethernet (probably at the end, if you have the ethernet run to the client location) to change it to coax for the client. Your Genie would already have a connection to the network, so as long as the ethernet going to the client is on the same segment as the Genie you shouldn't need another DECA.

Do you happen to know the part numbers for the MoCA 2.0 gigabit DECAs? Haven't seen those...

clients need a coax in.
S
clients need a coax in.

Yes, you need one to convert your ethernet to coax for the client (either at the client, or where the coax going to it originates) What's the second one needed for, assuming you have your Genie connected via ethernet as well as coax?
M
Yes, you need one to convert your ethernet to coax for the client (either at the client, or where the coax going to it originates) What's the second one needed for, assuming you have your Genie connected via ethernet as well as coax?

1 to convert coax to ethernet, then 1 for ethernet to coax
S
1 to convert coax to ethernet, then 1 for ethernet to coax

The Genie already acts as a bridge, you don't need the second DECA.
Foxbat
Okay, next request for expertise: The DirecTV DVR coax goes into a power injector which I assume is headed to the dish reflector mounted on the 3-Seasons room roof. I'm also assuming there must be a splitter or two in the connection since there is one coax that comes up in the guest bedroom (where the AT&T router is along with the DECA bridge) and the Genie located in the Master Bedroom.

I bought a SWM 2-way Green Label Splitter (MSPLIT2R1-03) to allow me to attach a DCAU1R0-01 on the same coax going to the DVR. Is it recommended to connect this between the DVR and the Power Injector or between the Power Injector and the coax going into the wall (using the power-passing pair of connectors)? Also, I assume the input would be towards the dish and the DVR/DECA bridge connected to the outputs, please correct me if I'm wrong or if it doesn't matter.

I've noticed in my experimenting with the two DECA bridges and the splitter that any open port had better be terminated. It's not a problem in a small setup, but I could imagine troubleshooting a two story, five bedroom home could takes some time...
S
Okay, next request for expertise: The DirecTV DVR coax goes into a power injector which I assume is headed to the dish reflector mounted on the 3-Seasons room roof. I'm also assuming there must be a splitter or two in the connection since there is one coax that comes up in the guest bedroom (where the AT&T router is along with the DECA bridge) and the Genie located in the Master Bedroom.

I bought a SWM 2-way Green Label Splitter (MSPLIT2R1-03) to allow me to attach a DCAU1R0-01 on the same coax going to the DVR. Is it recommended to connect this between the DVR and the Power Injector or between the Power Injector and the coax going into the wall (using the power-passing pair of connectors)? Also, I assume the input would be towards the dish and the DVR/DECA bridge connected to the outputs, please correct me if I'm wrong or if it doesn't matter.

I've noticed in my experimenting with the two DECA bridges and the splitter that any open port had better be terminated. It's not a problem in a small setup, but I could imagine troubleshooting a two story, five bedroom home could takes some time...

Doesn't really matter which side of the power supply you install the splitter, just make sure the DECA is connected on the second port (the one that isn't red, since that's the one that passes power)
  • Like
Reactions: Foxbat
Foxbat
The install went smoothly, and happily the USB port on the back of the HR44 DVR is live all the time. Thanks for all the answers!
  • Like
Reactions: raoul5788
Foxbat
Doesn't really matter which side of the power supply you install the splitter, just make sure the DECA is connected on the second port (the one that isn't red, since that's the one that passes power)
I ended up installing the SWM 2-way splitter on the non-power side (it worked out better that way) so the coax goes from the wall to the power injector and from the injector to the 2-way splitter. The HR44 is plugged into the power-passing port of the splitter and the DECA bridge is connected to the power-blocking port.

While I had everything powered down I was able to run the power injector cabling and the power brick for the HR44. The installer strung them over the back of the entertainment center instead of behind the unit. I had always wondered why it was done that way. Now it looks cleaner.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in SatelliteGuys Support Center
Due to security concerns and the fact that the Tapatalk Plugin for Xenforo is no longer being updated we have removed Tapatalk support from SatelliteGuys.

For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)

add_to_home.gif

Thanks for your understanding. :)
6 Replies · 152 views
Foxbat
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
dweber
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
  • Like
Reactions: charlesrshell
Peter Parker
Thank you, Scott, for adding years to my Life and dropping my BP a few millimeters! Money well spent…
Hooray!
  • Like
Reactions: charlesrshell
Peter Parker
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
Do you mean the safari browser?
Foxbat
What is PWA app? PWA utilities seem to be a Spanish app. I hope you are seeing this since nothing seems to be working. I will miss SatelliteGuys. Tapatalk worked well. The Siri browser doesn't seem to work well.
Actually, PWA stands for "Progressive Web Application" and is basically just saving a site's homepage to your desktop where it appears as an "App" with the rest of your smartphone's Apps.
1781162703297.webp
  • Like
Reactions: charlesrshell
Scott Greczkowski
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.

TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.

In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.

Screenshot 2026-06-11 085611.webp



In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.

Screenshot 2026-06-11 085641.webp


And here was the cost of the Premium Tier.

Screenshot 2026-06-11 085701.webp


Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.

Screenshot 2026-06-11 090141.webp



So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.

Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.

In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.

If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.

Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.

I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]

The above link also explains PWA's better as well. :)

If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.

But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. :) Please give the PWA a try.
  • Like
Reactions: b4pjoe
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67103 Replies · 2662227 views
  • Like
Reactions: c-spand
RaiderPower
King Of The Road - Roger Miller
long_time_DNC
King Of Pain - The Police
H
Haven't Got Time For The PAIN-Carly Simon
  • Like
Reactions: ClarkGable
ClarkGable
No Time - The Guess Who
harshness
Time After Time - Cyndi Lauper
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Sports Section
111 Replies · 2718 views
  • Like
Reactions: Foxbat and meStevo
Foxbat
Awesome pictures, Yespage! Thanks!

I caught the end of the four hour race on YouTube so I wasn't "spoiled", but got to see the exciting last lap action in the TCR division!
Y
Awesome pictures, Yespage! Thanks!

I caught the end of the four hour race on YouTube so I wasn't "spoiled", but got to see the exciting last lap action in the TCR division!
I heard on the radio, after the final pitstop, Turner Motorsport were resigned to second place. 'You're in second. Don't worry about it. First is McLaren, we aren't catching them.'
  • Like
Reactions: Foxbat
Y
Caught up to the 500... err... k in St. Louis. What a race! Andretti Motorsport were doing very well with Ericsson and Kirkwood, meanwhile Power was moving up the grid. Veekay started cautiously. He was working the tires just right, becoming more lethal later in the stint. Rasmussen was racing likewise, not nearly as insane as he has in the past. Palou was leading the race, in a shocker to all. Caio Collet was having a wonderful ride, making Ferucci potentially sweat a bit. Rain came, rain went, rain came, rain went. Generally mild sprinkles, but enough to pause racing on an oval.

Palou would kind of send Siegel into the wall. Siegel really didn't do much wrong. As he noted, you have to turn at some point. Palou had acres of room below and Siegel might have had his ticket out of Indycar stamped. Dixon was doing the fuel thing and got busted twice by yellows, not pitting before the flag came out. Then the most critical happened... Palou ran out of gas on pit lane, effectively giving Newgarden the race lead and win. Newgarden had a very early pit, so he was able to slide in, get service and go. Meanwhile, everyone else was confused and stuck behind Palou for a bit. Once people figured what was happening, Newgarden had a major advantage of several seconds. Newgarden wouldn't look back and when it went green again, he'd hold the lead for the win.

Massive credit to Juncos Hollinger who bested Penske in getting Veekay out before Malukas in a transition that was oddly bizarre. I haven't had time to check, but I'm wondering if Veekay was about to run out of fuel or cut a tire. He was charging late in a stint, got up to fifth, and then tailed back for a few laps to 10th or 11th. It looked like it was over. Went into the pits, and after the pitting sequence was over, Veekay was well inside the top ten again. It was weird. And he charged, getting up to fourth. He made a late move on Rasmussen, but Rasmussen held his position with some great driving. In fact, there was a ton of incredible racing passing, not passing all race long. Veekay would finish 4th. A podium would have been awesome, but it is a great outcome for a guy who hopefully will get a break with a big team. We saw what Veekay could do with a Honda last season with fuel save, imagine replacing Simpson on Ganassi and having speed to go with fuel saving. His 6th at Indy and 4th at St. Louis get him up to 13th in the points standings and only 5 points outside of the top 10.

Ericsson finished second, resigned to finishing behind the current best in the world guy on a short oval. Rasmussen got the final step on the podium, a nice rebound to what has been an otherwise bad year for him, and a good reward to ECR who just extended his contract.
Y
They raced USAC cars at Daytona once. Once! People died. Aj Foyt said 'f this', and left after the first go around. AJ freaking Foyt thought it was crazy! And cars weren't nearly as fast as they are now.

I think they tried Talladega once too.
Y
LeMans qualifying on going. WEC has d9ne a great job expanding the automotive company entries. Even without Porsche, a large nunber of manufacturers.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have had good experiences with Brave but lately I am frustrated with it.

Now when I launch the app it shows a box at the bottom asking if I want to go back to the last opened page. It is in conveniently located and I would prefer to eliminate it.

Does anyone know how to do this?

Please let's not sidetrack the discussion into an exploration of why I don't care for it or a lecture about all the wonderful aspects of the feature. I just do not care for it.
3 Replies · 65 views
b4pjoe
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.

Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.

Screenshot 2026-06-10 at 6.46.20 PM.webp
Peter Parker
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.

Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.

View attachment 191721
Thank you for trying to help. However thrse choices do not appear in Android. There is a setting for "New Tab Pages" that is similar but does not include your choice. I have tried all of the existing entries with no success
  • Like
Reactions: b4pjoe
Juan
Something like this maybe


Option 2: Set a custom Home button URL
  1. Click the menu icon in the top-right corner and select Settings.
  2. Click on Appearance in the left sidebar.
  3. Toggle on the Show home button switch.
  4. Under the home button settings, select the option to Enter custom web address and type in your preferred website. [1, 2, 3, 4, 5]
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5346 Replies · 509282 views
osu1991
Rooster Cogburn.

Keep forgetting the free movies on youtube are ad free with my premium subscription.
dfergie
Rooster Cogburn.

Keep forgetting the free movies on youtube are ad free with my premium subscription.
There are some really good movies on youtube.
Saving Private Ryan 4k, Dolby Atmos...
harshness
Saving Private Ryan 4k, Dolby Atmos...
These are severely limited. Getting better than stereo audio is improving, but still has a long way to go.
dfergie
These are severely limited. Getting better than stereo audio is improving, but still has a long way to go.
I went with my 4k disc after checking out that version.
osu1991

View: https://youtu.be/I68627xyDPA?is=gUZB0Yv_08pE0DR3


Tonight revisiting one of my favorites. Ranks up there with Star Wars, Raiders of the Lost Ark and Hunt For Red October.
dfergie
Watching Monterey Pop, been awhile, had the DVD, but probably lost in the fire 10.5 years ago. HBOmax
"MysteryMan"
813WnPwdB3L._SX342_.webp
  • Like
Reactions: dfergie
S
· posted in FTA Manuals Section
Looking for a manual. Want to do some radio astronomy with it. Realize it's old but, since it's not for tv use don't need any decoders, just the RF section.
0 Replies · 15 views
N5XZS
Last reply · posted in Over the Air Television By RabbitEars.Info
New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.😎
9 Replies · 128 views
M
This new station is owned by Digital Network and what kind of programmings is unkown at this time
probably the same programming they have been putting on their other owned stations.
The 'get after it media' stations
Like Heartland, Retro, rev'n, Action etc
  • Like
Reactions: dfergie
comfortably_numb
probably the same programming they have been putting on their other owned stations.
The 'get after it media' stations
Like Heartland, Retro, rev'n, Action etc

We already have those diginets here.
N5XZS
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2
  • Like
Reactions: comfortably_numb
comfortably_numb
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet :)
N5XZS
Yes that's a good channel MovieSphere, only thing is the missing CC on it. :rolleyes: :hatsoff2
  • Sad
Reactions: comfortably_numb
comfortably_numb
According to the FCC listing, the tower is near I-40 and Juan Tabo: