Social Feed

Rsadler
Last reply · posted in DISH Network Support Forum
I have Dish Network installed at home, with one Joey and a few Hoppers. I have a hunting cabin way out in the woods that I recently brought an old Dish 500 Pro Twin LNB, and a Dish VIP 211K that I had not being used up there so I at least had something to watch besides DVD's. As far as I can tell the 211K is HD capable, but I think I'd need triple LNB dish to be able to get a HD signal to the tv. My question is, can I just buy a triple LNB and use the same dish, or would I need the triple LNB and a completely different dish as well?
12 Replies · 2518 views
Rsadler
It sounds like my easiest option would be to just swap out the Dish 500 to a 1000 WA. I was planning on keeping the 211K since I own it, just wasn't sure if just swapping to a triple LNB with the 500 made sense, but it appears like the 211K with a 1000 WA would be the easiest and get all the channels I'm currently getting on 110 and 119, and possibly 129 as well, correct?
  • Like
Reactions: charlesrshell
Bobby
It sounds like my easiest option would be to just swap out the Dish 500 to a 1000 WA. I was planning on keeping the 211K since I own it, just wasn't sure if just swapping to a triple LNB with the 500 made sense, but it appears like the 211K with a 1000 WA would be the easiest and get all the channels I'm currently getting on 110 and 119, and possibly 129 as well, correct?
Absolutely your best option. As long as you have a view of the western arc you will be golden.
Rsadler
Absolutely your best option. As long as you have a view of the western arc you will be golden.
I was able to find the 1000.2 WA dish for a good price and should have it any day now. When I swap out the new dish with the extra LNB, will the coordinates be pretty much the same, just able to get the extra satellite due to the extra LNB?
E
I was able to find the 1000.2 WA dish for a good price and should have it any day now. When I swap out the new dish with the extra LNB, will the coordinates be pretty much the same, just able to get the extra satellite due to the extra LNB?
What's your zipcode/closest city? Depending on where you are in the country, you are going to have to point a few more degrees to the south (If you are right behind your current dish its to the left), and elevation may or may not need to be lowered a few degrees as well. Skew should be set before you mount it up, and there is a marker on the backside of the 1000.2 to do that. This page (MyDISH) can give you the directions in degrees based on your zip and some basic steps as well, as an example for my 774XX zip the difference was 6 degrees more south (214° on the 1K.2 vs 208°) and 3 degrees lower on the elevation (46° on the 1K.2 vs 49°)

The reason you cant just mount it the same way and be done with it (and not to mention it would be pretty surprising for someone to eyeball it and get a completely different dish mounted in the exact same direction down to the degree) is because the D500 has its 2 LNBF's side by side, so when aligning you are technically pointing towards 114.5°, the middle point between 110/119. On a 1000.2/4/plus you are aligning for 119 (72.7 if EA), since this is the LNB in the center and 110/129 will come in on the side LNBF's once 119 is present on it (as long as your skew is correct).
Rsadler
What's your zipcode/closest city? Depending on where you are in the country, you are going to have to point a few more degrees to the south (If you are right behind your current dish its to the left), and elevation may or may not need to be lowered a few degrees as well. Skew should be set before you mount it up, and there is a marker on the backside of the 1000.2 to do that. This page (MyDISH) can give you the directions in degrees based on your zip and some basic steps as well, as an example for my 774XX zip the difference was 6 degrees more south (214° on the 1K.2 vs 208°) and 3 degrees lower on the elevation (46° on the 1K.2 vs 49°)

The reason you cant just mount it the same way and be done with it (and not to mention it would be pretty surprising for someone to eyeball it and get a completely different dish mounted in the exact same direction down to the degree) is because the D500 has its 2 LNBF's side by side, so when aligning you are technically pointing towards 114.5°, the middle point between 110/119. On a 1000.2/4/plus you are aligning for 119 (72.7 if EA), since this is the LNB in the center and 110/129 will come in on the side LNBF's once 119 is present on it (as long as your skew is correct).
I figured it wouldn't be possible, but figured I would ask. At least it's in the general area. On my current setup, with the VIP 211K, I only have one signal in port on the receiver, and I connect to port 1 on the dual LNB, can I still just connect to port 1 with the triple LNB also. The documentation at Mydish shows it connecting with a cable to ech port and three separate signal in connecting to the receiver, but I swear I saw somewhere that showed it being done with the same one signal in from port 1.
Bobby
The 1000.2 has a built in switch. One coax from port 1 should be fine.
Bobby
To be clearer, I should have said that the western arc LNB for that 1000.2 dish has the built in switch. There are three ports 1-3 to feed receivers. The 4th port is to add another dish.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Hard getting used to the new younger Gibbs, Mark Harmons son had the right look but I understand he didn't want the role.
Still I'm enjoying, pretty good job with Franks.
66 Replies · 4197 views
  • Like
Reactions: MikeD-C05
dfergie
Really good one with OG Gibbs bookending it...
R
Really good one with OG Gibbs bookending it...
Will the OG Gibbs be on NCIS or will Tony be on NCIS Origins?
dfergie
Tony was there at the end of the episode with Gibbs.
R
Tony was there at the end of the episode with Gibbs.
I saw Gibbs walk into the door, but I did not see Tony.
Jimbo
Tony was there at the end of the episode with Gibbs.
Tony was Not in this episode ... you may remember Gibbs walking into the office and those around Welcomed him home, Voices only.

If you also watch the Mothership, Tony has been in that one ...
dfergie
Tony was Not in this episode ... you may remember Gibbs walking into the office and those around Welcomed him home, Voices only.

If you also watch the Mothership, Tony has been in that one ...
I must have seen that in previews
.
"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
519 Replies · 47131 views
EarDemon
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
WhiteBeard
If it wasn't for what I want, I wouldn't need any of this.

Do I need a collection of handheld radios, scanners and speed enforcement countermeasures? Nope, but I want them. Very little, if any of the software used to interface with these devices is available on Linux.
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
  • Haha
Reactions: meStevo
EarDemon
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything. ☹️
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
HipKat
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.

I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
I'm sorry, but the Dock is optional. I run Arch Linux, and tbh, as someone without specific, niche needs like your radios, the GUI is really no different, and I worry less about my OS being infiltrated. The OS is less bloated; there is no OEM Software that I have to dig through to disable or remove; coding is not a massive pile of problems that require constant patching, and if there is a problem, I can easily fix it myself (ChatGPT is great for Linux or any programming issues), and setting it up to look the way I want it to does not take days/weeks. It takes barely an hour. Not to mention, a cold boot takes barely 30 seconds from Power on the being fully booted.

Ubuntu is a joke, btw

TRG would back this up better than I can, I'm sure
EarDemon
I have no OEM bloat, on CTO devices where I can access the drive, I order it with the smallest allowed drive and crack the device open throw the factory drive in the garbage and put in my own WD Black and install Windows from bootable media. For Windows bloat, I install Windows using the English - World option which limits preinstalled MS bloat.

Windows and Office features I wish to block, like CoPilot and Cortana, macro enabled Office files and others are blocked with GPOs.

Between keeping all software up to date, doing firmware updates, putting IoT devices on a separate VLAN, running Symantec Endpoint (say what you want about it, it's been good to me) and practicing safe hex, I'm vigilant but not paranoid about security.

With NVMe SSDs, my cold boot up time on all devices is under 30 secs as well. Fast boot disabled, BitLocker drive encryption enabled.

I have nothing against Linux, been paying with it on and off since 2004ish, it's just not the right solution for me.
HipKat
it's just not the right solution for me.
As I said above, and, FWIW, I run Win11 Pro and Arch on separate 250 GB NVME drives, using F8 to select which I boot to, with a 1TB SSD for storage, accessible to both OSs and a third formatted Nvme I want to use to learn Kali. It was much faster to setup Arch than it was to strip down Windows. Windows still takes much longer to boot.

1792104425403.webp
harshness
I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows.
What is so fantabulous about the Windows UI? By many accounts, it has been going downhill since Windows 7.

There are Linux desktops that offer Windows or Mac UIs, yet you don't hear much chatter about them outside of questions about when the creators might get sued.
  • Like
Reactions: HipKat
EarDemon
What is so fantabulous about the Windows UI?
Because it's what I prefer. I know I've said this a few times, I use Open Shell to give me the cascading start menu a la WIN 95 and NT4.0. The only reason I went from Windows Vista to 7 back in the day was because of Classic Shell. I cannot stand anything other than the OG start menu from 30+ years ago. I'm using ExplorerPatcher to give me Windows 10 UI elements of the taskbar and right click context menus.

If you could take a look at how I set up Windows 95, you'd find many similarities to how I use 11.
osu1991
Pub Member / Supporter
· posted in TV Shows
0 Replies · 2 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68494 Replies · 2670306 views
  • Like
Reactions: c-spand
Bobby
Kiss - The Art Of Noise
long_time_Dish
Beautiful Noise - Neil Diamond
sdfntx
White Noise - Jessie Baylin
  • Like
Reactions: Bobby
dishstaller
White Rabbit - Jefferson Airplane
long_time_Dish
White Sun - The Doobie Brothers
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Wasn't exactly sure where to post this. Just had a customer come in inquiring about internet. He has HughesNet and had heard good things about mine. He asked if we provided email addresses and it kinda caught me off guard. I said he should be able to keep whatever email he had been using....my sister in law is still using a BellSouth email addy and they haven't been around here for many years. He said he had gotten a letter from HughesNet stating that they had until Nov 16th to save, move, forward, whatever, their Hughesnet emails because they would lose them after that date.

I have never heard of a company simply mass-deleting email accounts (the customer still has his HughesNet service). From what I understand, in the past, the company who was ditching their email service simply sold the customer base to a company like Google.

Anyone else getting this letter. He said he would show it to me tomorrow when I go out there and set up his internet.
7 Replies · 112 views
Foxbat
Doing a Google of the HughesNet Email notice, it seems that HughesNet has been trying to eliminate hosting emails since 2019. And with HughesNet filing Chapter 11 back in August, it would be a smart move to switch to a more stable Email provider. Even AT&T farmed out their Email to Yahoo! years ago.

SpaceX's Starlink and the Cellular 5G Home Internet solutions have pretty much relegated HughesNet and its high latency, low bandwidth Internet service to History. If Earth had shorter days, maybe a Geostationary Internet Solution might have stood a fighting chance…
navychop
If Earth had shorter days,

Wouldn't we then die of old age sooner?

🙄
Foxbat
Wouldn't we then die of old age sooner?

🙄
Still the same number of years, just more Sunsets…😉
K
Even AT&T farmed out their Email to Yahoo! years ago.

I still have one of those although I've been trying to wean myself off it.
JSheridan
Among my many email accounts I still have a .netscape.net which AOL assimilated a while back.
EarDemon
Yep, I got the notification a few days ago. I'm not totally surprised.

Never used the address for anything, so no big loss to me.
meStevo
Lifetime Supporter
Last reply · posted in TV Shows
Starting a thread klang !

After an amazing first 2 seasons and an 8 episode 3rd season still coming this year, season 4 has now been greenlit.

Keri Russell Wow GIF by NETFLIX
9 Replies · 927 views
  • Like
Reactions: klang
K
Probably starting season 3 tonight. :D
meStevo
Finished it this evening. General impressions with no story spoilers, but will spoil it anyways as it just came out today.

Not quite as impactful of a finale as past seasons I thought, we'll see how far down the rabbit hole things go as the latest plot twists and turns unravel. Thought this season had a full episode or two too much rom-com style disagreements, but it was more or less paid off later. Ultimately didn't enjoy that being more of a throughline in the stories this season compared to what I remember of the priors.

My least favorite of the 3 seasons, but still very good. Really wonder how far they'll go with things, hard to see a nuclear attack or something ever actually happening. They just had a better story to tell and more meaningful beats in the prior season.
KAB
KAB
Not in a hurry to watch it this time.
K
Finished season 3 last night. Still one of my favorite shows.

Anyone else wonder if there might be something else going on with Callum? Seems to me he has too much access to Russian intelligence.
meStevo
One episode into season 4 that dropped today...

Jon Stewart Popcorn GIF
Bobby
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
This thread is a place to discuss the 4K events that appear on channel 540. We are getting, at this point, one college football game a week. Let's hope there is more coming.
1930 Replies · 298816 views
jsmit86
Regarding the no sound bug when watching 4K HDR events or DVR recordings with Dolby set to ON:
I got rolled back to H708 last night after getting an email from the support team. It fixed the bug.

The email indicated that they believed they found the issue, and if the fix works, they would roll it out via an update in the coming weeks.

So... we should see that bug exterminated in the near future.
long_time_Dish
148-04 says the NASCAR race on at noon on Sunday. Be interesting to see if it is.
  • Like
Reactions: charlesrshell
Bobby
MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.
  • Like
Reactions: charlesrshell
Foxbat
MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.
CFB, Notre Dame at BYU, Saturday 10-27, 4:30PM PDT, Channel 148-03.
CFB, Ohio State at Indiana, Saturday 10-17, 9AM PDT, Channel 148-01.
CFB, Arizona State at Texas Tech, Saturday 10-17, 12:30PM PDT, Channel 148-01.
Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.🙁

I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.

edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.
  • Like
Reactions: charlesrshell
Bobby
Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.🙁

I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.

edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.
As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.
  • Like
Reactions: charlesrshell
Bobby
As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.
As an edit, you need to sub to the National Action Pack at $12 a month to receive those channels.
  • Like
Reactions: charlesrshell
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 6 views
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 3 views
Foxbat
Supporting Founder Pub Member / Supporter Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Apple has finally released their Apple TV 4K with built-in Siri and a microphone so it can respond to your queries even if you don't have the remote. It also increases in price, to $299. I had been planning on updating my current Apple TV 4K streamers, but that's $600 for the two of them, and that's a pass at this point.

At $299, it had better come with 256 GB of Storage, Gigabit (or better) Ethernet, the latest HDMI tech and standards, and one year of free Apple One. But it probably won't…
13 Replies · 155 views
Ronnie-
Meh. The 4Ks I have will do everything that these do that I need them to do.


Which that's most tech these days for anything released the last four to five years.


It's honestly a testament to how good the previous gen Apple TVs were and are.
navychop
I've saved a boatload of money!
navychop
It's honestly a testament to how good the previous gen Apple TVs were and are.

Don't tell them that. They'll adopt planned obsolescence.
Foxbat
The only thing I can see that is compelling is the AV1 decoding done in the A19's hardware instead of the current ATV4K's processor.
navychop
Outside of gaming, would Joe Sixpack notice any difference?
KAB
KAB
Outside of gaming, would Joe Sixpack notice any difference?
Not a bit. IMO, apple's are slow to boot up. Time is about the same with 1st gen and 3rd. Roku runs rings around them in that department. I only stick I with the Apple tv's is the Apple infrastructure, which has it's definite advantages. But $300 is not worth sticking with it. Later, Apple!
  • Like
Reactions: comfortably_numb