Pretty easy to do it your self. First thing first. You gotta call Direcway to setup a account, they will tell you to get a professional intaller but you don't need to. All you do is ask which satellite and frequency they want to use.
Ask for question like, what longitude the satellite is, what is the frequency. horizontial or verital up and downlinks are, symbol rate and virtibi mode. Then get SAM and PIN number for your account from them.
Once you get all that all you do is get a laptop with wireless router and wireless router to hook up to the modem so you can connect and monitor the signal when you aim the dish without having to hook up long ethernet cable.
hook up the dish to about where you need to aim at. Hook up the 6000 to WAN port of you wireless router. make sure your router don't use 192.168.0.xxx for DHCP/GateWay etc. Change it to 192.168.xxx.xxx instead.
Then you log on to the modem using
http://192.168.0.1/fs/registartion/setup.html
Choose Professional install.
Enter zip code, click next, then choose manul transponder entry and input the numbers you got from direcway tech. Make use OPI is uncheck that should take you to place where should give you Elevation and Skew. (set up the dish)
and choose signal meter. if everthing is right meter should start at round 10. if anything higher there is something wrong with parameters.
Move the dish slowly until you get to some green on signal meter and tweak until peak. Screen only refresh every 1 sec so only make slow adjustments.
70-80 are good depending on satellite you're aiming at. Once you find the peak lock the dish down. Next will be Cross polling. Choose Manual.
That's where you mess with the Skew, you loosen then skew bolts and tweak until you get the best result. (Exteremely sensitive so move very slow and watch the number change. They will jump all over the place depening on weather etc. so just get the best average you can get. Then you do automatic xpoll, keep doing it until you get the best one.
after all that you should beable to get to registration page after that then. Make sure you're using Internet Exploder thought. Stupid directway program don't know jack sh*t about javascripts.
PM me if you need help. Anybody can do this stuff, its very easy! Hardest part is putting the dish on the damn mount 28' high.