322g separator

[cmbtbb68]

Hi all: I have a 322g/vip622 installation. Both receivers have 2 lines run, one inbound and one for TV2.

I want to move the 322g to another location but there is only one cable line run to the new location. Is there a splitter/diplexer/line separator available for me to run both the inbound and the TV2 on the one available cable?

Thanks for any assistance!

Tim

 

[Andrewwski]

Yep. You need a DPP Separator and two diplexers. Two separate components. Run the incoming line to the diplexer first, then take the sat side and connect it to the separator, take the other side and run it to TV2 out. Run the two separator lines into the receiver.

On the other end, in the basement or wherever, connect the diplexer - single-port side connected to the cable from the receiver. Run the sat side to the LNB or switch and the other side to TV2.

 

[cmbtbb68]

Great thanks!

 

[kb2vgp]

Just make sure your cable is RG6 2250MHz minimum or you'll be running into trouble later on!

 

[SSgt USMC]

In order to use the seperator, you must ensure your LNB is DPP (Dish Pro plus) OR have a DPP 44 switch.

 

[tlc1145]

If he has only 1 inbound then he has to be using a separator which means it has to be dish pro [+] lnbf.

 

[gregskin]

Or you can call Dish Network and have a tech take care of all that for you.

 

[Jimmerinwi]

Or you can call Dish Network and have a tech take care of all that for you.

I agree, it is easier to have someone come out and switch it around for you. It can get rather confusing to someone who really doesn't do that too often.